COMMSCOPE CW-M3-120 Corner Wall Mount Installation Guide
- July 6, 2024
- CommScope
Table of Contents
CommScope CW-M3-120 Corner Wall Mount
Product Information
Specifications
-
Product Name: Corner Wall Mount 2 7/8 x 120 Pipe
-
Material: Galvanized Steel
-
Dimensions: 2.875 inches outer diameter x 120 inches
length -
Weight: 35.44 lbs
Product Usage Instructions
Installation
- Identify any hazards or obstructions before installing the product.
- Tighten all bolts securing flat plates using the turn-of-nut method.
- Secure U-bolts using the turn-of-nut method, ensuring equal distance and force on each leg.
- Follow all safety guidelines during installation to maintain the integrity of the climbing facility.
Packaging and Assembly
- Check that all components listed in the assembly instructions are included in the package.
- Refer to the provided part numbers to assemble the product correctly.
- If any extra hardware is supplied, store it safely for future use.
Parts list
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
- FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED BEFORE INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BEREQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
- PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
- PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
- EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
DIMENSIONS
FAQ
Q: Where can I find patent information for the product?
A: You can find patent information at https://www.cs-pat.com.
Q: What precautions should I take during installation?
A: Identify hazards, tighten bolts securely, and follow all safety guidelines to maintain the climbing facility’s integrity.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>