COMMSCOPE VZWSMART-SFK1L Large LEG Tie Back Stiff Arm Kit Owner’s Manual
- July 7, 2024
- CommScope
Table of Contents
REVISIONS
REV.| DESCRIPTION| DATE|
APPROVED
A
| INITIAL RELEASE| LS1146
30MAY24|
XK1001
40196865CMO
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
PLAN VIEW
TIE BACK ASSEMBLY ADAPTER FOR ANGLE
a) EXISTING TOWER LEG
b) FIELD CUT & TRIM TO MATCH THE REQUIRED LENGTH
c) TIE BACK PIPE (2″ PST 120″ LONG)
d) FIELD DRILL 0.69″ DIA HOLES
e) VARIES
f) HORIZONTAL ANGLE
PLAN VIEW
TIE BACK ASSEMBLY WITH ADAPTER FOR PIPE
a) EXISTING TOWER LEG
b) SEE DETAIL A
c) FIELD CUT & TRIM TO MATCH THE REQUIRED LENGTH
d) TIE BACK PIPE (2″ PST 120″ LONG)
e) SUPPORT RAIT PIPE (4.5″ O.D. PIPE MAX.)
DETAIL A
SCALE 1 : 7
a) EXISTING TOWER LEG
© 2024 CommScope, Inc. Confidential
DENSITY
MASS
VOLUME
SURFACE AREA
|
lbs/in³
102.96 lbs
366.44 in³
3213.33 in²
---|---
HEIGHT
LENGTH
WIDTH
| (20.0″)
(120.0″)
(12.0″)
COMMSCOPE, INC. OF NORTH CAROLINA
TOLERANCES
1 PLACE .X[.X] ± 0.2[6.3] 2 PLACE .XX[.X] ± 0.12[3.0] 3 PLACE .XXX[.X] ± 0.060[1.5] ANGLES ± 2°
|
SAP MATERIAL MASTER
VZWSMART-SFK1L
FINISH| MATERIAL
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES INTERPRET PER ANSI Y
14.5M-1994| |
NAME
|
DATE
| TITLE
TIE BACK ASSEMBLY FOR LARGER LEG
CE| LS1146|
30MAY24
RW| LS1146|
05/30/2024
| |
AD| YMENG|
05/30/2024
|
SCALE
1:15
| DOCUMENT NO.
VZWSMART-SFK1L
RE| YMENG|
05/30/2024
ECN 40196865CMO
SIZE
| Auth Group
INSL
|
MODEL
|
DRAWING
|
SHEET
1 OF 2
C
|
|
VERSION
| STATUS| REVISION| VERSION| STATUS| REVISION
00| RE| A| 00| RE|
A
ROUND TOWER LEG ATTACHMENT DETAIL
a) EXISTING TOWER LEG
b) TOWER LEG ATTACHMENT
(FIT UP TO 16″ O.D. LEG)
ANGLE TOWER LEG ATTACHMENT DETAIL
a) EXISTING TOWER LEG
b) TOWER LEG ATTACHMENT
(FIT UP TO 16″ 60 ANGLE LEG)
(FIT UP TO 11″ 90 ANGLE LEG)
ADAPTER FOR PIPE CONNECTION
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
THE BOM OF TIE BACK ASSEMBLY ADAPTER FOR ANGLE
ITEM NO.
| PART NUMBER| DESCRIPTION| QTY.| WEIGHT| NOTE NO.
---|---|---|---|---|---
1
| PST2375-10| PIPE, TIE BACK|
1
|
36.63 LBS
|
2
| BP8625-19625-00| BENT PLATE, .375 X 4.38 X 19.63|
1
|
17.18 LBS
|
3
| BP11125-19625-00| BENT PLATE, .375 X 5.25 X 19.63|
1
|
22.61 LBS
|
4
| MTC4104-0014| BENT PLATE, .375 X 6 X 6.88|
1
|
5.24 LBS
|
5
| MTC4104-0031| BENT PLATE|
1
|
1.15 LBS
|
6
| GUB-53050| 5/8″ X 3″ X 5″ GALV U-BOLT KIT|
2
|
1.09 LBS
|
INCLUDES U-BOLT, FLAT WASHERS, LOCK WASHERS AND NUTS
7
| MT-382-18| 5/8″ X 18″ GALV THREADED ROD|
2
|
1.55 LBS
|
8
| GB-0520A| 5/8″ X 2″ GALV BOLT KIT (A325)|
2
|
0.26 LBS
|
INCLUDES BOLT, LOCK WASHER AND NUT
9
| GB-0542A| 5/8″ X 4-1/4″ GALV BOLT KIT|
1
|
0.46 LBS
|
INCLUDES BOLT, LOCK WASHER AND NUT
10
| GWF-05| 5/8″ GALV FLAT WASHER, 1.7OD|
7
|
0.06 LBS
|
11
| GWL-05| 5/8″ GALV LOCK WASHER|
4
|
0.03 LBS
|
12
| GN-05| 5/8″ GALV HEX NUT|
4
|
0.08 LBS
|
THE BOM OF TIE BACK ASSEMBLY ADAPTER FOR PIPE
ITEM NO.
| PART NUMBER| DESCRIPTION| QTY.| WEIGHT| NOTE NO.
---|---|---|---|---|---
1
| PST2375-10| PIPE, TIE BACK|
1
|
36.63 LBS
|
2
| BP8625-19625-00| BENT PLATE, .375 X 4.38 X 19.63|
1
|
17.18 LBS
|
3
| BP11125-19625-00| BENT PLATE, .375 X 5.25 X 19.63|
1
|
22.61 LBS
|
4
| MTC4104-0014| BENT PLATE, .375 X 6 X 6.88|
1
|
5.24 LBS
|
5
| MTC4104-0031| BENT PLATE|
1
|
1.15 LBS
|
6
| GUB-53050| 5/8″ X 3″ X 5″ GALV U-BOLT KIT|
2
|
1.09 LBS
|
INCLUDES U-BOLT, FLAT WASHERS, LOCK WASHERS AND NUTS
7
| MT-382-18| 5/8″ X 18″ GALV THREADED ROD|
2
|
1.55 LBS
|
8
| GB-0520A| 5/8″ X 2″ GALV BOLT KIT (A325)|
2
|
0.26 LBS
|
INCLUDES BOLT, LOCK WASHER AND NUT
9
| GB-0542A| 5/8″ X 4-1/4″ GALV BOLT KIT|
1
|
0.46 LBS
|
INCLUDES BOLT, LOCK WASHER AND NUT
10
| GWF-05| 5/8″ GALV FLAT WASHER, 1.7OD|
11
|
0.06 LBS
|
11
| GWL-05| 5/8″ GALV LOCK WASHER|
4
|
0.03 LBS
|
12
| GN-05| 5/8″ GALV HEX NUT|
4
|
0.08 LBS
|
13
| PL375-4511| PLATE, TIE BACK MOUNTING|
1
|
5.07 LBS
|
14
| V-CLAMP| CLAMP, 4 SLOT V|
1
|
4.90 LBS
|
15
| GB-05605FT| 5/8″ X 6″ GALV BOLT KIT FULL THREAD|
4
|
0.59 LBS
|
INCLUDES BOLT, LOCK WASHER AND NUT
16
| GWF05A| GALV FLAT WASHER HARDENED 5/8″, 1.3OD|
4
|
0.04 LBS
|
© 2024 CommScope, Inc. Confidential
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
TIE BACK ASSEMBLY FOR LARGER LEG
SIZE
C
|
SCALE
1:7
| DOCUMENT NO.
VZWSMART-SFK1L
|
DRAWING
| SHEET
2 OF 2
VERSION| STATUS|
REVISION
00
| RE|
A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>