THE DRIVESHAFT SHOP 2016 plus Camaro One Piece Driveshaft Owner’s Manual
- July 5, 2024
- THE DRIVESHAFT SHOP
Table of Contents
THE DRIVESHAFT SHOP 2016 plus Camaro One Piece Driveshaft
Product Information
Specifications
- Design: High-Performance One-Piece Driveshaft
- Application: 2016+ CAMARO
- Intended Use: High-performance applications
- Features: Precision balanced for maximum power transfer
Product Usage Instructions
Our driveshafts have been designed with the highest quality standards in mind for maximum performance. We have manufactured and precision balanced each shaft to allow your vehicle to transfer more power to the ground. This driveshaft is intended for high performance applications where vehicle performance and safety are top priorities. Please note that you are converting from an OE two-piece driveshaft design to an aftermarket High Performance one- piece design. With this change and other performance driveline & suspension components that need to be installed in tandem will impact overall NVH (Noise, Vibration, Harshness) during certain operating conditions. To minimize the effects of NVH we recommend you start by rotating the driveshaft 180 degrees and bolting your driveshaft into its new position. To find the optimal operating position it is possible that you will need to make small adjustments and evaluate performance during this process. For more information on this refer to our Vibration Check list located in the support section of our website.
Installation Guidelines
- Ensure you are converting from an OE two-piece driveshaft to the new one-piece design.
- Check the Vibration Check list on the manufacturer’s website for optimal positioning.
- Rotate the driveshaft 180 degrees during installation to minimize NVH effects.
- Make small adjustments as necessary and evaluate performance during the process.
Measurement Check
Driveshaft CV Clearance: Must be checked after installation. Running the
driveshaft outside allowed range will void warranty.
Adapter Plate Hardware Torque
- Front (All): (3) M12 Bolts at 70 ft-lbs / (6) M10 Bolts at 57 ft-lbs
- Rear (Stock Differential): (3) M12 Bolts at 70 ft-lbs / (4) 3/8 Bolts at 54 ft-lbs
FAQ
Q: What should I do if the Driveshaft CV Clearance measurement is outside
the allowed range?
A: Do not run the driveshaft if the measurement is not within the
specified range. Contact customer support for further assistance.
Q: How can I optimize the performance of the driveshaft?
A: Follow the installation guidelines provided, including rotating the
driveshaft and making necessary adjustments for optimal performance.