Lorelli ARIA LUXE Car Seat Instruction Manual

: September 17, 2024
: lorelli

Table of Contents

Lorelli ARIA LUXE Car Seat
INSTALLING THE CHILD SEAT TO THE SEAT OF THE CAR
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lorelli ARIA LUXE Car Seat

car seat

ARIA LUXE

Size range : 40 – 87 cm

MANUAL INSTRUCTION designed in EU
www.lorelli.eu

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device

CAR SEAT

IMPORTANT! READ CAREFULLY EN AND SAVE FOR FUTURE REFERENCE.

This is a Universal enhanced child restraint system (height range: 40-87cm / maximum user weight: 13 kg., rear-facing). It is approved under UN Regulation No. 129 for use mainly in “Universal seating positions” as specified by vehicle manufacturers in the vehicle user manual. In case of doubt, consult the manufacturer of the enhanced child restraint system or the dealer.
This car seat is approved for use with the following types of installation methods:

REAR-FACING INSTALLATION: ECE R129/03 Universal seat belt ECRS, rear- facina from 40-87 cm and child weight ≤13 kg.. with adult safetv belt:

Appropriate only if the approved vehicles are equipped with three-point / retractor safety belts approved in accordance with UNECE Regulation Ne 16 or other equivalent standards.

DO NOT use the device in seating positions where an anti-impact airbag is installed and unlocked.

Important safety instructions!
The instructions for use must be kept for the entire life of the universal child restraint system!

ATTENTION! The hard items and plastic parts of the enhanced child restraint system must be placed and installed so that, when the vehicle is in normal operation, they cannot be trapped by a sliding seat or vehicle door.
ATTENTION! All belts that secure the restraint system to the vehicle must be taut, all belts that restrain the child must be adjusted to the child’s body. The belts should not be twisted.
ATTENTION! It is extremely important to ensure that the lap belt is used low down so that the pelvis is secure.
ATTENTION! It is recommended that the device be replaced when it has been subjected to violent mechanical stress in an accident
ATTENTION! It is dangerous to make alterations or additions to the device without the approval of the type approval authority. Failure to follow exactly the installation instructions provided by the manufacturer of the child restraint system can be hazardous.
ATTENTION! When the chair is not equipped with a fabric cover, it should be kept away from sunlight, as it may otherwise be too hot for the child’s skin.
ATTENTION! Do not leave children unattended in an enhanced child restraint custom
ATTENTION! Properly secure any luggage or other items that may cause injury in the event of a collision!
ATTENTION! Do not use the enhanced child restraint system without its cover.
ATTENTION! Do not replace the cover of the enhanced child restraint system with anything other than that recommended by the manufacturer, as the cover integral to the performance of the child restraint system.
ATTENTION! The seat cannot be used as a front-facing seat!
ATTENTION! The car seat is compatible with the Aria, Bianka, Venice, Viola, Glory, Alba model strollers!
ATTENTION! When using the car seat: This product s not mean to replace a cot or a bed for sleeping. If your child needs to sleep, you need to place them in a suitable carrycot, cot or bed
ATTENTION! Regularly check the belts for wear, paying special attention to the attachment points, the guards and the adjusting devices!
ATTENTION! Do not leave the buckle partially closed, it should be locked when all parts are engaged. You must be able to remove the child from the seat immediately in the event of an emergency. Your child should be taught never to play with the buckle.
ATTENTION! Store the child seat in a safe place out of the reach of children when not in use. Avoid placing heavy objects on the seat. Do not allow your car seat to come into contact with corrosive substances like battery acid.
ATTENTION! Do not keep your child on this safety seat for a long period of time. During long journeys, take more breaks and remove the child from the safety seat.
ATTENTION! The images on the front page and inside the manual are for illustrative purposes and may differ from the actual product.
ATTENTION! Before the first use of the product, remove all marketing materials, as well as the devices used to attach them to the product.
ATTENTION! DO NOT use the enhanced child restraint system if the buckle position of the adult seat belt with respect to the seat’s main anchor points is unsatisfactory, please contact the manufacturer if in doubt.
ATTENTION! DO NOT use anchor points other than those described in the instructions and marked on the enhanced child restraint system, please contact the manufacturer if doubt.

TYPE OF APPROVED BELTS YOU MUST HAVE IN YOUR CAR
Your child seat can be installed ONLY using a 3-point belt, facing away from the direction of travel!

It can be installed ONLY on seats WITH 3-POINT BELTS!

IT CANNOT BE USED ON SEATS WITH 2-POINT BELTS!

Parts: Picture A

Carry handle
Soft padding
Strap padding
Shoulder straps
Lap belt guide
Buckle
Buckle pad
Cover
Harness adjustment strap
Canopy
Diagonal belt guide
Headrest adjustment button
Red button for adjusting the handle

WASHING INSTRUCTIONS

The car seat can be cleaned with lukewarm water and soap. Do not use aggressive cleaning agents such as abrasives or solvents.
The cover must be hand washed at a maximum temperature of 30°C. Do not put it in the dryer. Allow the cover to air-dry.
Plastic parts can be cleaned with a damp cloth. Do not use abrasives.

STRAP LENGTH ADJUSTMENT

1. Loosening the straps: press the strap adjustment button and at the same time pull the two shoulder straps. (Picture 1)

2. Press the red button to release the shoulder straps. (Picture 2, 3)

3. Tightening the straps: Place the child in the seat, secure both fasteners (Picture 4) in the centre buckle (Picture 5, 6) and pull the strap at the middle of the seat. (Picture 7)

4. The headrest can be adjusted by pressing and holding button 12. (Picture 8) move the headrest to the desired position up or down according to the height of your child. Please make sure that the headrest is placed correctly around the child’s head. (Picture 9) The position of the belts should be slightly above the child’s shoulders. Make sure the straps fit properly over the child’s shoulders. Attach the shoulder straps to the buckle. (Picture 10)

INSTALLING THE CHILD SEAT TO THE SEAT OF THE CAR

Please use the car’s 3-point seat belts to ensure the safety of the child and secure the car seat!

Your child seat can be installed ONLY using a 3-point belt, in a position away from the direction of travel!

Step 1. Place the child seat on the car seat (Picture 11) “away from the direction of travel”, making sure it is snug against the backrest. $Lorelli-ARIA-LUXE-Car-Seat-image $14$$
Step 2. Pass the lap belt through the two guides on the side of the child seat. (Picture 12). Fasten the belt into the vehicle buckle until you hear a “click”. (Picture 13). Pull the shoulder belt up to tighten the child seat to the car seat and make sure the belt is fastened. $Lorelli-ARIA-LUXE-Car-Seat-image $15$$
Step 3. Pass the shoulder belt through the guide on the back of the child seat. (Picture 14) and pull on it to tighten. (Picture 15) $Lorelli-ARIA-LUXE-Car-Seat-image $17$$
Step 4. Ensure that the child seat is secured firmly to the car seat, the belt is taut and not twisted.

Adjusting the carry handle
To adjust the handle, simultaneously press the red buttons on both sides of the handle and turn.

Position: fixed down behind the back – function for feeding the child. (Picture 16)
Position: – fixed horizontally – swing function.
Position: – upright – carrying function.
Position: for mounting to the car seat.

Before carrying your child in the seat, make sure that the handle is fixed in the selected position, the belts are correctly fitted and the buckle is fastened properly.

INSTALLING THE CAR SEAT ONTO A STROLLER FRAME

Installing the car seat – insert the adapters into the holders on both sides of the frame, bearing in mind the difference between left and right sides. You must hear a “CLICK” (Picture 17, 18). Centre the seat holes to the installed adapters. Press the seat against the adapters until you hear a “CLICK”. (Picture 19 $Lorelli-ARIA-LUXE-Car-Seat-image $20$$
Removing the seat – simultaneously press the buttons on both sides of the adapters and pull up the seat from the stroller frame. (Picture 20) Removing the adapters – you can remove the seat from the adapters by simultaneously pressing the red buttons (Picture 21) on both sides of the seat.

$Lorelli-ARIA-LUXE-Car-Seat-image $22$$

WARNING: The car seat should only be installed facing the parents, as shown in Picture 23.

Removing the cover.
Disassembly – remove the padding of the seat. The main cover of the chair is removed and pulled out. (Picture 24)
For children up to 75 cm tall, the car seat must be used with the soft insert. When the height of the child is over 75 cm, you should remove the soft insert. Release the straps from the buckle and remove the soft insert.

WHEN TRAVELING

Before traveling, ensure the proper condition and fastening of the seat.
Keep the chair out of direct sunlight. Some parts can become hot and burn the child’s skin.
Place the seat in the car without the canopy.
Do not leave the child unattended.
All items in the car must be secured so that they do not harm the child in case of collision.
Place any sharp objects in boxes so that they do not harm they do not harm the child in unstable conditions.
In case of an accident, remove the child from the car immediately.
Do not turn around while driving if the child is crying. If necessary, pull over and attend to them.
For child seat repairs, contact an authorised workshop.