HUVI 4-Piece HydroPower Mop Set User Manual

HUVI 4-Piece HydroPower Mop Set

INCLUDES

• Water Tank
• 2 Mopping Pads
• Plastic Drip Mat

INSTRUCTIONS

1. Place the drip mat by the charging base (Fig. A). The adhesive pads under the mat can be used to help secure it in place.
2. Make sure the dust container is detached from HUVI.
3. Align and attach the new mop pad with the bottom of the water tank (Fig. B).
4. Open the tab on the water tank, then fill with clean water (Fig. C). Do not exceed the MAX line.
5. Attach the assembled water tank to HUVI as you would attach the dust container (Fig. D).
6. To use the mopping feature, go to the HUVI app, then select “Robot Settings” (Fig. E).
7. Select “Water Tank” to select the water output level (Fig. F). Note, the water level can only be adjusted while HUVI is running and not in standby.

CARE & CLEANING

1. Detach the mopping pad and clean with warm water.
2. Empty any residual water from the tank.
3. Use the handle on the water tank to remove the filter compartment (Fig. G).
4. Gently but firmly pull the latch on the side (Fig. G) of the filter compartment to open (Fig. H).
5. Empty any dust and debris (Fig. I).
6. Disassemble the filters (Fig. J) to clean by hand or with the cleaning brush included with HUVI.
7. Reassemble the filters and insert the assembled filter compartment into the water tank.
8. Reattach to the water tank to use again.

CONTACT US

If you have any questions or concerns, or are unhappy with your product, please reach out to us at SERVICE@KALORIK.COM, or by phone at our toll-free number: +1 888-KALORIK.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>