AUDIBAX Monster 90 LED Moving Head Light User Manual
- July 4, 2024
- AUDIBAX
Table of Contents
AUDIBAX Monster 90 LED Moving Head Light
Product Information
Specifications
- Voltage: AC90-240V, 50/60Hz
- Power: 150 W
- Light source: single 100W LED
- Patterns:
- Fixed pattern: 8 patterns + 1 white light
- Dynamic figure: 6 patterns + 1 white light
- Color: 7 colors + white light
Product Usage Instructions
Safety Instructions
Ensure the power outlet matches the equipment specifications. If the product
has a voltage selector, match the values before connecting. Regularly clean
and service the equipment to prevent damage and overheating caused by
environmental factors like dust.
General Information
Qualified service personnel should handle maintenance and repairs. Do not
remove covers as there are no user-serviceable parts inside. Pay attention to
warning symbols for electric shock risks and important operating instructions.
Important Information Regarding Lighting Products
- This product is designed for event technology, not household lighting.
- Avoid direct exposure to the light beam, especially for extended periods.
- Avoid using optical instruments to look directly at the beam.
- If sensitive to strobe effects, be cautious as they may trigger epileptic seizures.
Package Content
- 1 x Monster 90
- 1 x User manual
- 1 x Power cord
- 1 x Signal line
FAQ
Q: What are the DMX channels for the Monster 90?
A: The Monster 90 has 7 DMX channels.
Q: What is the power source compatibility for the Monster 90?
A: The Monster 90 operates on AC90-240V, 50/60Hz.
Q: How many patterns and colours are available in the Monster 90?
A: The Monster 90 features 8 fixed patterns + 1 white light and 6 dynamic figure patterns + 1 white light, along with 7 colours and a white light option.
INTRODUCTION
WELCOME TO AUDIBAX
- Thank you very much for choosing Audibax. We hope you enjoy your new product.
- It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality.
- We make sure that every Audibax product is built to last long. All our references are made with long-lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.
- Please read carefully this manual to use your Audibax product in the best way. Do not hesitate to visit our website for further information: www.audibax.com
SAFETY INSTRUCTIONS
GENERAL INFORMATION
- It is important to read and follow the instructions carefully.
- Keep all information and instructions in a secure location.
- Always follow the instructions provided.
- Take note of all safety warnings and never remove them from the equipment.
- Use the equipment only as intended and for its intended purpose.
- Ensure that the stands and/or mounts used are sufficiently stable and compatible with fixed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
- When installing the equipment, be sure to observe the relevant safety regulations in your country.
- Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufficiently and cannot overheat.
- Do not place sources of ignition, such as burning candles, on the equipment.
- Keep ventilation slits unobstructed.
- Equipment designed for indoor use only should not be used near water, flammable materials, fluids, or gases. Special outdoor equipment should be used according to the manufacturer’s instructions.
- Ensure that no dripping or splashed water can enter the equipment and do not place containers filled with liquids on the equipment.
- Prevent objects from falling into the equipment.
- Use the equipment only with recommended accessories intended by the manufacturer.
- Do not attempt to open or modify the equipment.
- Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
- During transport, take steps to prevent the equipment from falling and causing damage or injury.
- If the equipment is not functioning properly, fluids or objects have gotten inside, or are otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualified personnel should repair the equipment.
- Clean the equipment with a dry cloth.
- Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
- Keep plastic bags out of the reach of children.
FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:
- ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
- If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
- Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not fit your outlet, contact an electrician.
- Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
- Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
- Avoid frequently turning the equipment on and off, as this can reduce its useful life.
- IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service centre.
- To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
- If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
- Unplug the power cord or adapter before an extended period of disuse or in case of a lightning strike risk.
- Only install the equipment when it is disconnected from the power source.
- To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.
If the product contains the following symbols, please, read carefully:
- CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.
- The warning triangle with the lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.
- The warning triangle with an exclamation mark indicates important operating and maintenance instructions.
IMPORTANT INFORMATION
WARNING!
IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS
- This product is specifically designed for use in event technology and is not intended to be used as household lighting.
- It is important to avoid looking directly at the light beam, even for a short period.
- Optical instruments, such as magnifiers, should not be used to look directly at the beam.
- If you are sensitive to strobe effects, it is possible that they could cause an epileptic seizure. If you have epilepsy, it is important to avoid places where strobe lights are being used.
PACKAGE CONTENT
- 1 x Monster 90
- 1 x User manual
- 1 x Power cord
- 1 x Signal line
PRODUCT DESCRIPTION
- Voltage: AC90-240V, 50/60Hz
- Power: 150 W
- Light source: single 100W LED
- Pattern: Fixed pattern: 8 patterns +1 white light, dynamic figure: 6 patterns + 1 white light
- Color: 7 colors + white light
- Control Mode: DMX512, Sound, Auto, master-slave
- Channel: 14CH
DISPOSAL
Packaging:
- The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
- Please follow the laws and regulations regarding the disposal and recycling of packaging in your country.
Device:
- This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used devices must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
- Please follow all the disposal laws and regulations in your country.
- As a customer, you can obtain information on environmentally friendly disposal options from the product seller or the appropriate regional authorities.
DMX Channels
14 Channel Mode
1 | Dimmer | Linear dimming brightness 0-100% | 0—-255 |
---|---|---|---|
2 | Strobe | Strobe | 0—-251 |
Open | 252—-255 | ||
3 | X-axis | Strobe (slow to fast) | 16—-255 |
4 | Y-axis | Horizontal adjustment 0-540° | 0—-255 |
5 | Pan/tilt speed | Vertical adjustment 0-270° | 0—-255 |
6
|
Colour wheel
| White| 0—-4
Red| 5—-9
Amber| 10—-14
Blue| 15—-19
Green| 20—-24
Orange| 25—-29
electric pink| 30—-34
Marine aqua| 35—-39
Red White| 40—-44
Red Yellow| 45—-49
Blue Yellow| 50—-54
Green Blue| 55—-59
Orange Green| 60—-64
Electric-pink/Orange| 65—-69
| | Navy Aqua/Electric Pink| 70—-74
White/Marine Aqua| 75—-79
Slow to fast colour carousel| 80—-255
7
|
Fixed pattern
| White| 0—-9
Gobo 1| 10—-19
Gobo 2| 20—-29
Gobo 3| 30—-39
Gobo 4| 40—-49
Gobo 5| 50—-59
Gobo 6| 60—-69
Gobo 7| 70—-79
Gobo carousel from fast to slow| 80—-129
Slow/fast inverted gobo carousel| 135—-220
Gobo 1 snake from slow to fast| 221—-225
Gobo 2 snake from slow to fast| 226—-230
Gobo 3 snake from slow to fast| 231—-235
Gobo 4 snake from slow to fast| 236—-240
Gobo 5 snake from slow to fast| 241—-245
Gobo 6 snake from slow to fast| 246—-250
Gobo 7 snake from slow to fast| 251—-255
8
|
Dynamic gobo
| White| 0—-9
---|---|---|---
Pattern 1| 10—-19
Pattern 2| 20—-29
Pattern 3| 30—-39
Pattern 4| 40—-49
Pattern 5| 50—-59
Pattern 6| 60—-69
open gobo| 70—-79
Gobo carousel from fast to slow| 80—-129
open gobo| 130—-134
Slow/fast inverted gobo carousel| 135—-220
Gobo 1 snake slow to fast| 221—-225
Gobo 2 snake| 226—-230
Gobo 3 snake| 231—-235
Gobo 4 snake| 236—-240
Gobo 5 snake| 241—-245
Gobo 6 snake| 246—-250
Gobo open snake| 251—-255
9
|
Dynamic graph rotation
| Fixed gobo rotation| 0—-63
Automatic gobo rotation from slow to fast| 64—-134
Reverse auto rotation from fast to slow| 135—-190
Reversed auto rotation from slow to fast| 191—-255
| | No prism effect| 0—-99
10| Prism| Prism effect| 100—-199
Prism rotation (from slow to fast)| 200—-255
11| Focusing| | 0—-255
12| X fine-tuning| Fine adjustment pan| 0—-255
13| Y fine-tuning| Tilt fine adjustment| 0—-255
14| Reset| Without effect| 0—-127
Restart| 128—-255
DATA SHEET
- Brand: Audibax
- Product Name: Audibax Monster 90 Moving Head Professional Led Spot 80w 8 Colors + 6 Gobos
- EAN: 0637913061325
- Category: Lighting
- Mobile heads
- Lamp Type: Led
- Power: 80W
- Rotating gobos: Yes
- Number of Gobos: 6
- Fixed Gobos: Yes
- Battery Operation: No
- Exterior Use: No
- Colour Mix: CW
- Motorized Zoom: Yes
- Housing Color: Black
- Connections: 3 Pin XLR
- Motorized Focus: No
- Prism: Yes
- Iris: No
- Number of LEDs: 1
- Power per LED: 80 W
- Effect: No
- Wireless Control: No
- DMX control: Yes
- Colour Temperature: 6500 K
- Opening Angle: 20 – 25º
- Number of Color Wheels: 1
- Height: 35 cm
- Width: 24 cm
- Depth: 20 cm
- Weight: 5.8 kg