RHINO Guardrail Pro Omni Adjustable Skidsteer Mounted Pile Driver Owner’s Manual
- June 12, 2024
- RHINO
Table of Contents
Pneumatic • Hydraulic • Gasoline
Professional Grade Tools
Guardrail
Pro
Omni Adjustable Skidsteer
Mounted Pile Driver
Part Number 360002
Designed to expedite the installation of guardrail posts utilized in highway guardrail systems. This professional-grade skid steer attachment is designed, built, and supported in the USA to provide shorter lead-times and unmatched product support. It’s omni adjustable, powerful 800 ft. lb. (1,085 joule) hydraulic hammer safely increases jobsite productivity and profits.
Features and Benefits
Pile Driver Attachment is Omni Adjustable to ensure precise, prompt, and plumb, pile installations regardless of the job site terrain.
- Mast tilts 2° right, 90° left, and 10° front and back.
- Attachment adjusts 10” front-to-back, and 24” left to right.
- Accommodates guardrail posts up to 8.5’ (259 cm) tall.
Utilize existing company owned (or rental) hydraulic operated skid steer.
- No need for an expensive self-propelled pile driver to complete projects on-time and on-budget.
- Universal Skid Steer mounting plate for quick attachment to most units. Rhino provided, custom mounting plate available on request.
State-of-the-art, Furukawa Fx 55 Hydraulic Hammer with 2-year warranty.
-
Designed for efficient driving, dependability, and long life.
-
Powerful 800 ft. lbs. (1,085 joules) of Impact energy per stroke (approx 1,000 blows/min.)
-
New and improved piston (increased diameter and longer stroke) increases speed – Providing greater impact energy.
-
Mono-block design – Reduced maintenance with only two moving parts.
Quality US materials and workmanship for dependability, low maintenance, and a long operating life. -
Parts and service available throughout the USA.
-
Readily available SAE fittings and hardware – Overnight shipment available on most parts.
-
Hydraulic components are inventoried, or repairable by most local hydraulic repair shops.
2 YEAR
WARRANTY
Furukawa Hydraulic
Hammer
1 YEAR
WARRANTY
Materials and
Workmanship
Optimal Positioning
The Attachment is off-set (right-side) so skid steer operator can easily
maintain straight lines.
Reliable Operation
Designed for dependability, low maintenance, and a long life:
- Minimal grease zerks
- Occasional adjustment
- Designed, built and supported in the USA
Improved Mobility
Pile Driver Attachment retracts, and folds, for ease of transportation to and
from the job site.
Scan QR for Videos
https://vimeo.com/showcase/10168632
Adjust mast front-to-back: To accommodate for uneven terrain, mast tilts
(front-to-back) 10° in each direction.
Adjust mast left or right: To accommodate for uneven terrain, mast tilts
2°right. The mast tilts 90° left for adjustment and transport.
Adjust attachment front-
to-back:
Attachment provides precise positioning front-to-back with 10” (25.4 cm) of
adjustment.
Adjust attachment side-to-side:
Attachment provides precise positioning side-to side with 24” (61 cm) of
adjustment.
Hammer can drive 8.5’ guardrail post, stopping at approx 21” (53 cm) above the
ground.
Two quick-read,
numbered, leveling indicators to plumb posts. Accommodates guardrail posts
(piles) up to 8.5’ (2.6m) tall. Easily transport company owned, or rental,
hydraulic operated equipment (skid steer or loader) and Guardrail Pro
Attachment.
Guardrail Pro Specifications
Unit Weight| 3,000 lbs. (1,361 kg)
Pile Driving Impact Energy| 800 ft. lbs. (1,085 joules) Per Stroke
Blows Per Minute| Approximately 500 to 1,000
Omni Directional Adjustment for positioning the Pile and to Accommodate for
Uneven
Terrain| Mast Tilt 2 Degrees Right & 90 Degrees Left
Mast Tilts 10 Degrees Forwards and Backwards
10″ (25.4cm) Front to Back Adjustment
24″ (61cm) Left to Right Adjustment
Unit Size Folded for Transportation| 6′ 2″ H x 3′ 10″ W x 11′ 8″ L (1.88 x
1.17 x 140m)
Maximum Pile Height| 8.5′ (2.6m) Tall
- Standard Anvil – Max. Footprint| 8″ x 7.25″ (20.32 x 18.4cm)
- Optional Large Anvil – Max. Footprint| 10″ x 7.25″ (25.4 x 18.4cm)
*Custom sizes and shapes available.
Skid Steer Requirements
Skid steer Minimum Operating Weight| > 10.000 lbs. (4.536 kg)
Skid steer Minimum Rated Operating Capacity| > 3.000 lbs. (1.360 kg)
Hydraulic Requirements| 3-Lines: Pressure – Return – Case Drain
Hydraulic Operating Pressure Range| 1740 – 2320 psi (120 – 160 bar)
Hydraulic Oil Flow Range| 10.5 – 22.5 gpm ( 40 – 851pm)
Omni Directional Adjustment
for precise positioning and leveling of the pile and to accommodate for Uneven
Terrain
Guardrail Pro Accessories
Lift Kit, Puller, and Adapters Removable adapter plate, shown above.
Custom sizes and shapes available. Bottom Guide secures Pile – Custom sizes
and shapes available.
Versatility from one unit – Multiple Adapters to provide efficient driving of
piles/post/beam up to a maximum footprint of 10” x 7.25” (25.4 x 18.4cm), and
maximum height of 8.5’ (259 cm) tall.
- C-Channel Piles
- Highway Guardrail Posts (W6 x 9)
- I-Beam
Don’t see your post type? Contact us about custom adapter fabrication.
| Adapter / Guide | Part No. | Pile / Post / Beam Type |
|---|---|---|
| 360294 / 360295 | S3 x 5.7 I-BEAM | |
| 360296 / 360154 | W6 x 9 I-BEAM | |
| Adapter / Guide | Part No. | Adapter Opening Size |
| --- | --- | --- |
| 360200 / 360154 Standard | 6” x 4.5” | |
| 360296 / 360154 | 7” x 4” |
Pile Lift Kit features a magnetic lift assist that attaches to the pile or
post. With a rated lift strength of 1378 lbs and a max pull-off strength of
550 lbs, this accessory aids the operator in manipulating the pile/ post from
the ground into a vertical position.
The single leg lift chain on the magnet has a working load limit of 2700 lbs,
when pulling at 90 Degrees. This accessory can easily be removed when not in
use or while transporting. Part No.360270 Pile Puller Kit features a 1 ton
vertical lift plate clamp and safety shackle attached to the steel pull plate
on the front of the mast and hammer. The vibratory assist, and a vertical pull
capacity of 2000 lbs (1 ton) removes pile/post from the ground. This accessory
can easily be removed when not in use or while transporting. Part No. 360267
© Copyright 2023 Rhino Tool Company, Inc.
A Tradition of Quality and Service Since 1975
RHINO TOOL COMPANY
1134 WEST SOUTH STREET • KEWANEE, IL 61443
www.rhinotool.com
866-707-1808
Documents / Resources
|
RHINO Guardrail Pro Omni Adjustable Skidsteer Mounted Pile
Driver
[pdf] Owner's Manual
Part Number 360002, Guardrail Pro Omni Adjustable Skidsteer Mounted Pile
Driver, Guardrail Pro Omni, Adjustable Skidsteer Mounted Pile Driver,
Skidsteer Mounted Pile Driver, Skidsteer Mounted Driver, Pile Driver, Driver
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>