Lowe s BF-3611 Full Queen King Bed Frame Installation Guide
- July 3, 2024
- Lowe s
Table of Contents
Lowe s BF-3611 Full Queen King Bed Frame Installation Guide
Component List
Package List
Step 1
ATTENTION
For longer use .
Re-tighten bolts every 3 months by using the enclosed allen-key.
*Using an electric drill can damage the frame.
Please re-tighten bolts manually .
Attach Side Frame (3) to the side of the Frames (1 &2) with Screws *(B)4**. Repeat the same installation steps to get Two installed Frames.
Note : Fully expand the frame before installing the screws. Otherwise the
screw cannot be twisted in.
The screws are tightened by 50% first.
Step 2
Align the head and tail of the Middle Frame (4) with the two installed Frames, and secure them completely with Screws *(A)4**.
Note : The screws are tightened by 50% first.
Step 3
Align the screw holes on the legs of the two Frames, and secure them completely with Screws (C)2 and Nut (E)2.
Note : The screws are tightened by 50% first.
Step 4
Insert Center Slat (6) into the Center Slat (5). After fixing both, insert them onto the groove in the middle of the Side Frame (3)2 , and fix the Center Slats (5 &6) to the Middle Frame (4) with Screw (D)1.Finally, the Central Slat (5) and the Central Slat (6) are fixed with a Nut *(E)2** .
Note : Once installation is complete, tighten all screws 100%. Tighten the screws again every 3 months.
Step 5
Insert Slats *(7)24 evenly onto each groove of the Frames (3 &4)**.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>