AVTech 5MP H.265 AI-based Full Color Dome IP Camera – NDAA – AVColor Instruction Manual
- July 2, 2024
- AVTECH
Table of Contents
VTech 5MP H.265 AI-based Full Color Dome IP Camera – NDAA – AVColor
DEFAULT VALUES & IP SEARCH
Note: The default values of the IP camera are listed below:
| IP Mode | DHCP | Username | admin |
|---|---|---|---|
| Port | 80 | Password | admin |
To know how to find the IP address assigned to the IP camera, please refer to the steps below.
Note: The tool for IP search is compatible only with Windows OS.
Step1: Download the IP search tool from the link below and install the
tool on your PC/laptop:
http://www.surveillance-download.com/user/IPscan.zip
Step2: Open IP Scan and choose Scan to start searching the IP cameras connected to the same router / switch as your laptop / PC is connected to.
Note: To log into the camera directly, enter its IP address and port
number in a web browser (URL format: http://ipaddress:port) to show the login
page, and fill in its user name and password.
The default username and password are both admin.
SYSTEM CONNECTION & SETUP
Note: The system connection and setup is using our own brand’s recorder as an example. To know how to connect our cameras to other brand’s recorder, please refer to the manual of the recorder.
Step1: Connect cameras to our recorder and log into the recorder.
Note: The default username and password are both admin.
Step2: Go to MENU→ CAMERA →CONNECTION and select IP SEARCH at the bottom right corner. A list of every connected IP camera will be shown with its connection status to your recorder and MAC address.
Step3: An IP address will be assigned for each connected IP camera
automatically.
Check □ to assign a channel for the listed camera automatically and choose ADD
to confirm.
Note: If no IP address is assigned, please reset your camera and refresh the list.
Step4: Return to the live view and wait for the live feed to show.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>