AVTech LUNAFRBATTU-DY Battery Powered Fresnel LED User Manual
- June 4, 2024
- AVTECH
Table of Contents
AVTech LUNAFRBATTU-DY Battery Powered Fresnel LED
Product Information
Specifications:
- Product Code: LUNAFRBATTU/DY
- Dimension: 187mm x 172mm x 231mm
- Weight: 1kg
- Rated Power: 40W
- Input Voltage: AC100-240V
- Frequency Range: 50/60Hz
- Ambient Temperature: Refer to manual for specific range
- Beam Angle: Adjustable
- LED Quantity: Not specified
- Duration of Endurance: Varies with brightness levels and rotation angle
- Charging Time: Not specified
Product Usage Instructions
Safety Warning:
Always read the user manual before operation. Confirm the power supply
matches the mains power supply in your area. Take caution to prevent electric
shock.
Installation:
Mounting:
The fixture can be mounted in any position. Ensure the mounting surface can
withstand 10 times the weight of the fixture. Always use a safety cable when
mounting in an elevated position.
Duration of Endurance:
The endurance duration varies based on brightness levels and rotation
angle. Refer to manual for specific values.
Operation:
Instruction for Switch:
Adjust brightness using the manual dimmer knob from 0% to 100%.
Use the zoom button for angle adjustment.
Charger Specifications:
Input Voltage: AC100-240V, Output Voltage: DC51V1A, LED Indicator (GREEN):
200mA
Zoom Handle:
To adjust the angle, turn the zoom button counterclockwise to increase and
clockwise to reduce the angle.
Battery Charging:
Flightcase Specifications:
Voltage: AC100-240V, Rated Power: 150W, Weight: 14.5KG, Dimensions: 788mm x
360mm x 215mm
Physical Map for Charging Suitcase:
Ensure proper air circulation by fully opening the aircraft box during
charging. Turn off the fixture after charging and disconnect power to avoid
battery damage.
FAQs
- Q: How long does the battery last at full brightness?
A: The battery endurance duration varies based on the brightness level and rotation angle. Refer to the manual for specific values.
Product Introduction
Specification
| Product Code | LUNAFRBATTU/DY |
|---|---|
| Dimenson | 231×172×187(mm) |
| Weight | 2.5KG |
| Rated Power | 40W |
| Input Voltage | AC100~240V |
| Frequency Range | 50/60Hz |
| Ambient Temperature | 0℃~45℃ |
| Beam angle | 12°~34° |
| LED quantity | WW1PCS/CW1PCS |
| Duration of endurance | Full power about 6H |
| Charging time | When charging current is 1A, it takes about 2.3h |
Safety warning
IMPORTANT
Always read the user manual before operation.
Please confirm that the power supply stated on the product is the same as the
mains power supply in your area.
- This product must be installed by a qualified professional.
- Always operate the equipment as described in the user manual.
- A minimum distance of 0.5m must be maintained between the equipment and combustible surface.
- The product must always be placed in a well ventilated area.
- Always make sure that the equipment is installed securely.
- Do not stand close to the equipment and stare directly into the LED light source.
- Always disconnect the power supply before attempting and maintenance.
- Always make sure that the supporting structure is solid and can support the combined weight of the products.
- The earth wire must always be connected to the ground.
- Do not touch the power cables if your hands are wet.
ATTENTION
- This product left the place of manufacture in perfect condition. In order to maintain this condition and for safe operation, the user must always follow the instructions and safety warnings described in this user manual.
- Avoid shaking or strong impacts to any part of the equipment.
- Make sure that all parts of the equipment are kept clean and free of dust.
- Always make sure that the power connections are connected correct and secure.
- If there is any malfunction of the equipment, contact your distributor immediately.
- When transferring the product, it is advisable to use the original packaging in which the product left the factory.
- Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their effectiveness is impaired.
- The lamp (LED) shall be changed if it has become damaged or thermally deformed.
Caution, risk of electric shock
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Installation
Mounting
The fixture can be mounted in any position.Always ensure that mounting surface
can withstand 10 times the weight of thefixture.
Always use a safety cable when mounting the fixture in any elevated position.
Important safety note!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
Duration of endurance
Operation
Instruction for switch
Charger specifications with cartons
- Voltage：AC100－240V，50/60Hz
- Output：DC51V，1A
- LED(GREEN)： 200mA
Zoom handle
Battery Charging
Flightcase specifications：
- Voltage：AC100－240V，50/60Hz
- Rated Power：150W
- Weight：14.5KG
- Dimensions：788x360x215mm
Physical map for charging suitcase
- When charging the fixturep, the aircraft box must be fully opened to maintain air circulation, and the box cover cannot be closed.
- The fixture must be turned off after charging, and the power must be dialed off after charging to avoid damaging the battery.