AVTECH BATCOOL320IP Mini LED WDMX IP65 Light User Manual

BATCOOL320IP Mini LED WDMX IP65 Light

“`html

Specifications

• Included Accessories: Power cables, XRL cables, Remote
  Control

• Dimensions: [Dimensions information not provided]

Product Usage Instructions

Safety Instructions

WARNING! This product is designed for
professional use in event technology. Do not use it as household
lighting. Avoid looking directly at the light source, especially
the stroboscope effect, as it can cause issues for sensitive
individuals.

Read and follow all instructions carefully to prevent any
accidents or injuries.

General Instructions

1. Avoid exposing the equipment to flammable materials.

2. Keep battery poles away from conductive objects to prevent
   short-circuiting and injuries.

3. Do not dispose of batteries in fire as they may explode.

4. Ensure proper earthing when connecting to a power supply
   system.

Warnings and Installation Precautions

• Securely fasten the device before operation.

• Avoid flames and keep away from flammable liquids or
  gases.

• Allow at least 0.8m of free air space around the unit for
  ventilation.

• Disconnect power when not in use or before cleaning. Handle the
  power cord carefully.

Menu Structure

The menu structure allows for various settings and
adjustments:

• Control Mode: W-DMX IRC
• Operate Mode: Auto Mode, Master/Slave, Sound
• Channels Setting: White balance, Dimmer Speed, Strobe, Effect
  Macro, Color Macros, etc.

FAQ

Q: Can this product be used for household lighting?

A: No, this product is specifically designed for professional
usage in event technology and should not be used as household
lighting.

Q: How should I handle the power cord?

A: Always hold the power cord by the plug and never pull it out
by tugging on the cord to prevent damage or accidents.

Q: What should I do if the batteries are damaged?

A: Do not dispose of damaged batteries in fire as they may
explode. Handle them carefully and follow proper disposal
guidelines.

“`

BATCOOL320 IP
15×20W mini LED WDMX IP65 Light
User manual

TECHNICAL SPECIFICATION
· 3 x 20W RGB + Lime Led · Optic 10° · Beam angle / 10° · Wireless DMX · IR Remote control · Auto / Static / WDMX/IRC · DMX : 5/9/10ch · Master-Slave /Audio · Dimensions : 30.7 x 28.8 x 147mm · Weight : 2Kg · IP65 · Wireless Solution Compatible · Operating time : up to 20H with one color
INCLUDED ACCESSORIES : Pow er cables + XRL cbles + Remote Control
DIMENSIONS :

SAFETY

WARNING! This is a product which has been developed for professional usage in
event technology. It is not suitable as a houshold lighting. Don t use magnifiers or any other optical instrument to look at the be The effects of this device, expecially the stroboscope effect, can cause problems for sensitive people or may even cause epileptical seizures.
NEVER stare, not even temporarily, directly into the light source. Please read, understand and follow the instructions

General instruction

1 Do not expose this equipment to flammable materials

2

Keep the battery poles away from conductive objects, such as keys, jewelry, or other materials. Otherwise, the battery may be short-circuited, resulting in injury and burns.

3 Do not dispose of batteries in fire as they may explode. Damaged batteries may also explode.

Connection must be made to a power supply system fitted with efficient earthing (Class I appliance

ac-cording to standard EN 60598-1 ). It is, moreover, recommended to protect the supply lines

of the units from indirect contact and/or shorting to earth by using appropriately sized residual

current devices. 4 The connection to the main network of electric distribution must be carried out by a qualified elec-
trical installer. Check that the main frequency and voltage correspond to those for which the unit is designed as given on the electrical data label. 5 Never use the fixture under the following conditions:

– in places subject to vibrations or bumps; – in places with an ambient temperature of over 45° C. 6 Make certain that no inflammable liquids, water or metal objects enter the fixture. 7 Do not dismantle or modify the fixture. 8 All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly. 9 If the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.

WarninGs and installation precautions
· In order to prevent the risk of an electric shock, under no circumstances remove the cover/back or open the unit in any way! No user serviceable parts are inside. Service, maintenance and
· repairs should only be done by qualified service personnel or the manufacturer. ·
CAUTION! Intense LED light source! Risk of eye damage. Do not look into the light source · · The fixture has an integrated, non-removable battery, do not attempt to remove the battery. Do · not open · the headlamp. To replace the battery, take the device to an authorized service center. ·
Never remove warning or informative labels from the unit. · Never use anything to cover the ground contact. · Never lift the device holding it by the projector-head, as the mechanics may be damaged · Do not shake the device. Avoid brute force when installing or operating the device. · Only operate the device after having checked if the housing is firmly closed and all screws are tight-
ly fastened. Only operate the device after having familiarized with its functions. Avoid flames and do not put close to flammable liquids or gases. Always allow a free air space of at least 0.8 m around the unit for ventilation. Always disconnect power from the mains, when device is not used or before cleaning! Only handle the power cord holding it by the plug. Never pull out the plug by tugging the power cord.

Page 28

DMX Address Operate Mode Channels Setting White balance

MENU STRUCTURE
The RED values are the default values

xxx Control Mode

W-DMX IRC

Auto Mode Auto SP Master/Slave Sound
Static control
Dimmer Speed

OFF

Auto01

Auto02

Auto03

Auto04

Auto05

Auto06

Auto07 000 > 100 – (50)

Master

Slave

000 > 100% – (60)

Dimmer

000-255

Strobe

000-255

Ef f ect M acro

000-255

Speed

000-255

Color macros

Red

000-255

Green

000-255

Blue

000-255

Lime Dim0 (0s)

000-255

Dim1 (0,25s)

Dim2 (050s)

Dim3 (075s)

Dim4 (1s)

5CH/9CH/10CH Hold Blackout Display reverse Battery:
Dimmer Curve
PWM Rate

On
Off
On/Off Eco. /Med./Full
Linear Exp
Log
S_Curv
600Hz 1200Hz 2400Hz 4800Hz 9600Hz 15K Hz

Black light

ON/OF

Screen time
Current ADJ Code 0006 Temp: W-DMX Setting Factory Reset

10-60S Red Green Blue Lime 60°C Link/ Reset ON/OFF

XXX XXX XXX XXX

Reserved for service Red Green Blue
Lime

050-255 050-255 050-255 050-255

050-255

System info

SoftwareV:
DMX Level
Temp Operate Time RDM

AFFICHEUR

1.00

Red

XXX

Green

XXX

Blue

XXX

Lime

XXX

XX°C XXXH

00A6hXXXXX

Menu : To exit active submenu. Enter : To enter the menu or confirm the active function or value.
: To scroll up in the menu or increase the value of the active function. : To scroll down in the menu or decrease the value of the active function. DMX ADDRESS MENU
DMX ADDRESS :
· Modify the DMX address using the [] et [] keys then validate using the [ENTER] key.
OPERATE MODE MENU
CONTROL MODE :
· Choose the control mode between W-DMX (wireless DMX) and IRC (Infrared remote control). using the [] et [] keys then validate using the [ENTER] key.
To select W-DMX mode, ensure that AUTO mode is OFF and MASTER/SLAVE mode is set to SLAVE
AUTO MODE :
· Choose one of the automatic mode options:
· [OFF] : by default. · [AUTO01] à [AUTO07] : Automatic modes
Using the [] et [] keys then validate using the [ENTER] key.
AUTO SP :
· Choose the running speed of automatic programs from 0 to 100 using the [] et [] keys then validate using
the [ENTER] key. SOUND :

Choose the audio mode and adjust the audio sensitivity from 0 to 100 using the [] et [] keys then validate using the
[ENTER] key.
MASTER / SLAVE :
· [MASTER] In this mode, The projector defines the W-DMX module as a transmitter and transmits the RGB Lime
parameters to all the projectors connected to it. Refer to the section [W-DMX Setting] to pair the projectors [MASTER] to the [SLAVE] projectors NOTE : In [MASTER] mode the DMX value reception function is disabled. To use unit via wireless Dmx switch projector to [SLAVE] mode.
Do not forget to validate any changes using the [] et [] keys and the [ENTER] key. · [SLAVE] In this mode, The projector defines the W-DMX module as a receiver and receives all DMX information wirel
essly.
STATIC CONTROL : Define to use the projector in STATIC mode. You can adjust the different parameters such as Dimmer, Strobe, Red, Green , Blue and Lime and thus create a light state or activate automatic programs or color macros (described in the different DMX
mode·s) Choose the different values from 0 to 255 using the [] et [] keys then validate using the [ENTER] key.
DIMMER SPEED : In order to smooth the dimmer it is possible to implement a DIMMER SPEED to te Projector
· Choose one of the dimmer speed values using the [] et [] keys then validate using the [ENTER] key.
· [DIM0] : 0 seconds. · [DIM1] : 0.25 seconds. · [DIM2] : 0.50 seconds. · [DIM3] : 0.75 seconds. · [DIM4] : 1 seconds.
CHANNELS MENU
CHANNELS :
· Choose the DMX mode from5 CH,10 CH. using the [] et [] keys then validate using the
[ENTER] key.
SETTINGS MENU

HOLD :
Choose one of these two options to set the s behavior when losing the W-DMX signal using the [] et [] keys then
validate using the [ENTER] key. · [ON] : keeps the last value in case of loss of the W-DMX signal · [OFF] : goes into blackout mode when losing the W-DMX signal
RDM : · Not implemented
DISPLAY REVERSE
Choose one of these two options to reverse the direction of the display using the [] et [] keys then validate using the
[ENTER] key. · [ON] : Inverted. · [OFF] : Normal.
BATTERY
Enter this submenu to define the battery management mode using the [] et [] keys then validate using the [ENTER] key.
· Choose [Eco.] · Choose [Med.] · Choose [Full] DIMMER CURVE
Enter this submenu to define the Dimmer curve using the [] et [] keys then validate using the [ENTER] key. · [Linear] – The increase in light intensity is linear as the DMX value increases. · [Exp] – Light intensity control is finer at low levels and coarser at high levels · [Log] – Light intensity control is coarser at low levels and finer at high levels. · [S-Curve] – Light intensity control is finer at low and high levels and coarser at medium levels.

Linear Curve BACKLIGHT :

Exp Curve

Log Curve

S Curve

· Not implemented

SCREEN TIME
Enter this submenu to define the duration before the display turns off (between 10 seconds and 60 seconds),à l’aide
des touches [] et [] puis valider à l’aide de la touche [ENTER].

CURRENT ADJ · Reserved for service.

TEMP

Reserved for service.

· W-DMX SETTINGS
Enter this submenu to configure Wireless DMX signal reception, using the [] et [] keys then validate using the
[ENTER] key.
· [LINK] Enter this submenu to pair the projector with the Wireless DMX transmitter.
Switch the transmitter to pairing mode then activate the [LINK] mode on the project or by validating using the [ENTER] key. [LINK] also allows pairing to a master projector. Follow the same procedure as pairing to a wireless DMX
transmitter.
· [RESET] This submenu allows you to unpair the projector from a previous wireless connection. validate using the
[ENTER] key. Note: It is mandatory to unpair the projector before pairing again.
WHITE BALANCE MENU

·

Reserved for service.

SYSTEM INFO MENU
Enter this submenu to get the projector’s system information:
· [Software V] To view the projector firmware version. · [DMX Level] To display DMX values for Red, Green, Blue and Lime channels. · [Temp] To display the projector temperature in Celsius. · [RDM] Not applicable

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>