COMMSCOPE MC-MNT-TOP-3 Mounting Kit for Metrocell Antennas Installation Guide
- July 2, 2024
- CommScope
Table of Contents
COMMSCOPE MC-MNT-TOP-3 Mounting Kit for Metrocell Antennas
GENERAL INFORMATION
- Top of pole mounting option Fits round members 6.3″ to 8.5″ (160 to 216 mm) pole diameter.
PRE-INSTALLATION INSTRUCTIONS
- Examine antenna and kit to ensure that all parts are enclosed and that there is no physical damage.
- Verify that the frequency range shown on the label on the bottom of the antenna matches the frequency range of the station equipment.
PARTS LIST
Instruction Sheet
SAFETY NOTICE
The installation, maintenance, or removal of an antenna requires qualified,
experienced personnel. CommScope installation instructions are written for
such installation personnel. Antenna systems should be inspected once a year
by qualified personnel to verify proper installation, maintenance, and
condition of equipment. CommScope disclaims any liability or responsibility
for the results of improper or unsafe installation practices. It is
recommended that the transmit power be turned off when the field installation
is performed. Follow all applicable safety precautions as shown on this page.
- Do not install near power lines. Power lines, telephone lines, and guy wires look the same. Assume any wire or line can electrocute you.
- Do not install on a wet or windy day or when lightning or thunder is in the area. Do not use a metal ladder.
- Wear shoes with rubber soles and heels. Wear protective clothing including a long-sleeved shirt and rubber gloves.
www.commscope.com 2023 CommScope, Inc. All rights reserved. Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information. All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. G040-0004 D (03/23)