MiCODUS MV710G GPS Tracker User Manual

MiCODUS MV710G GPS Tracker

Product Information

• Main Features
  • 4G LTE+ 2G GSM connectivity
  • GPS+BDS Remotely Cut Off +GLONASS /Resume Fuel
  • Real-time Tracking capability
  • Historical Route Playback feature
• Vibration Alarm for alerts
  • 9-95V Wide Working Voltage range
  • Tow Alarm functionality
  • Power failure alarm system
  • Geo-fence for boundary setting
• Device Information
  • Model: MV710G
  • Weight: N/A
  • Dimensions: N/A
  • Battery: N/A
  • Working Voltage: 9-95V
  • Working Current: N/A
  • Sleep Current: N/A
  • Working Temperature: N/A
  • Working Humidity: N/A
  • SIM Card: N/A
• Cellular Antenna Specifications
  • Working Frequency: N/A
• GNSS Specifications
  • GNSS GPS Frequency: N/A
  • BDS Frequency: N/A
  • Sensitivity: N/A
  • Satellite Channels: N/A
  • Hot/Cold Start Positioning: N/A
  • Antenna Accuracy: N/A
• External Interface
  • ACC Detection: Detects the status of the vehicle’s ignition switch
  • Cut Off Fuel/Power: Allows remote fuel/power cutoff
  • Open door Alarm: Alerts when a door is opened unauthorized

Product Usage Instructions

• Setting Up MiCODUS Tracker
  • Insert a compatible SIM card into the device.
  • Connect the device to a power source within the working voltage range (9-95V).
  • Download and install the corresponding tracking application on your smartphone.
  • Follow the application’s instructions to pair and configure the tracker with your phone.
• Using MiCODUS Tracker Features
  • To track real-time location: Open the tracking application and view the current location on the map.
  • To playback historical routes: Access the historical route playback feature in the application menu.
  • To set up geofence: Define a boundary on the map within which the vehicle should stay using the application.
  • To receive alarms: Configure alarm settings in the application for notifications on events like overspeed, low battery, or door opening.
• Troubleshooting Tips
  • If you encounter issues with the device, refer to the user manual for troubleshooting steps or contact customer support for assistance.

FAQs

• Q: How do I change the SIM card in the tracker?
  • A: To change the SIM card, power off the device, locate the SIM card slot, remove the existing SIM card, insert the new one, and power on the device.
• Q: Can I use this tracker with any smartphone?
  • A: The tracker is compatible with smartphones that support the tracking application required for pairing and monitoring.

Main Features

Specifications

℃  ℃

Working Temperature| -20 – 75
Working Humidity| 10%-85% RH non-condensing
Cellular Specifications| SIM Card| Micro SIM
Cellular Antenna| Built-in, FPC

Working Frequency

| GSM/2G : 850/900/1800/1900MHz
LTE/4G: LTE-FDD:B1/B2/B3/B4/B5/B7/B8/B28/B66
GNSS Specifications| GNSS| GPS+BDS+GLONASS
GPS Frequency| L1: 1575.42±1.023MHz
BDS Frequency| B1:1561.098±2.046MHz
Sensitivity| -162 dBm
Satellite Channels| 32
Hot/Cold Start| <1s，<32s @ Open Sky
Positioning Antenna| Built-in ceramic dielectric antenna, 18184mm
Accuracy| <10m（1σ）
External Interface| ACC Detection| 1
Cut Off Fuel/Power| Standard
Open door Alarm| 1

How to manage

How to manage the tracker to get online?

• Step 1 SIM card requirements
  • Please get a suitable SIM card from your local place. The SIM card must meet below points:
  • It must be compatible with the 4G LTE or 2G GSM network
  • Please enable SMS, call, and internet data traffic of the SIM card
  • Remove the PIN code
  • Enable the caller ID display feature
  • Use Micro size SIM card for the tracker
  • Please inquire with the SIM card provider for the exact correct APN information
• Step 2 SIM card installation
• Step 3 Wiring
  • NOTE: After installing the SIM card correctly, it is very important to connect the tracker with external power of no less than 12V for power supply before operation!
• Step 4 Configure APN
  • Please get the exact correct APN name from the local SIM card provider. Take the tracker to a good signal place for operation and configure the APN for it as below:
    SMS Command Format| Reply| Example| Note
    ---|---|---|---
    APN, ApnName, User, Password#|

SET APN OK

| APN, orange, orange, orange#| If the SIM card has an APN user and APN password, then use this command.
APN,ApnName#| SET APN OK| APN,internet#| If the SIM card operator doesn’t have an APN user and APN password, then please use this command.

• Note: The APN information is very important, it must be 100% correct to match with the sim card of the tracker, if you configure the wrong APN, the tracker also will reply “SET APN ok” but it won’t get online!
• Step 5 Indicator status description
  LED| Event| State
  ---|---|---
  CELL LED (YELLOW)| Searching for network| Flash every 1 second
  The network has been registered| Solid
  GPS LED (BLUE)| GPS is in fixing| Flash every 1 second
  GPS has fixed| Solid
  ALL LED| The device is working but stopped more than 5min| ALL LED TURN OFF
  The device has not been turning on
  The device ran out of battery

Package Content

• GPS Main Unit x 1
• Function Cable x 1
• User Guide x 1
• Genuine Packing Box x 1

Functions Explanation

• a. Cut Off Fuel/Resume Fuel
  • Set the centre number by this SMS command: CENTER, A, centre number#
  • Send this SMS command from the centre number: RELAY, A#
  • A=0/1/2; (0: Resume Fuel; 1: Cut Off Fuel Immediately; 2: Cut Off Fuel Safely)
• b. Vibration Alert:
  • T his vibration alert function just works under stationary status. How to use this function:
  • Configure SOS numbers for the tracker by this SMS command: SOS, A,1st number,2nd number,3rd number# 3 SOS numbers support at the most
  • Enable the device to enter into arm mode with this SMS command: ARM#
  • Conifgure the alarm ways by this SMS command: SENALM,[A][, M]#
  • A=ON/OFF, default: OFF;
  • M=0/1/2, way of alarming,
  • 0 :GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default:1
  • Keep the device under stationary status for more than 5min to let it enter into sleep arm mode;
  • Vibrate the device then the tracker will send the vibration alarm messages
• c. External Battery Low Voltage Alarm
  • Command format: LVALM,A,B,M#
  • A=ON/OFF, default： ON;
  • B=9-95V (voltage alarm threshold), default: 11.1v
  • M=0/1/2, way of alarming, 0: Server only,
  • 1: SMS+Server, 2: SMS+Server+Call, default:1；
  • For example: LVA LM, ON,11.5,1#
  • This means once the external battery voltage is less than 11.5v the device will send alarm message via server and sms.
• d. Engine Start and Flameout Alarm
  • Command format: ACCALM,A,B,M#
  • A=ON/OFF, Default: ON;
  • B: 0/1/2; 0: ACC ON Alarm; 1: ACC OFF Alarm; 2: ACC
  • ON&OFF Alarm; Default:2
  • M: 0/1/2 (way of alarm): 0: Server only,
  • 1: SMS+Server, 2: SMS+Server+Call, Default:1;
  • For example: ACCALM, ON,2,1#
  • This means once the device detects engine start and engine flameout it will send an alarm message via server and sms.

Installation Recommendation

1. The device should face up to the sky.
2. The metal thermal barrier of a heating layer of the windshield affects the signal.

Troubleshooting

whether the data service of the SIM card is enabled. Check the balance of the SIM card.
Tracker shows offline| Check whether external power is still connected. Check if the vehicle entered the network blind area. Check the balance of the SIM card.
Unable to locate| Make sure the top side facing upward without metallic things shielded. Make sure it’s not in an area with no satellite coverage.
Location drift| In areas with poor GNSS signal (tall buildings around or basement), drifting may happen. Check whether vibration happens around to trigger the accelerator.
No command reply| Make sure the command format is correct. The vehicle may be in a network blind area. Make sure the SIM card is well inserted and has SMS service.

Full SMS Commands List

Setting Commands

Functions| Command Format| Explanation
APN Setting| APN,Network name[,name, password]#| APN,CMNET# (if no name & Password) APN,internet,internet,internet# (if with name & Password)
Server Setting| If set with Domain Name: SERVER,1, Domain, Port#| SERVER,1,d.micodus.net,7700#
If set with IP: SERVER,0, IP, Port#| SERVER,0,47.254.77.28,7700#
Check IMEI| IMEI#| DEVICE IMEI No. : 0123456789
Change IMEI| IMEICHG,354188046912460#| NEW IMEI No. : 354188046912460
Restore factory settings| FACTORY#| RESTORE FACTORY SETTINGS OK
Restart device| RESTART#| RESTARTING…1 MINUTE WILL BE OK
Internet Traffic Switch| TRAFFIC, ON#| OPEN TRAFFIC OK
TRAFFIC, OFF#| CLOSE TRAFFIC OK
Time Zone Setting| GMT, A, B, C#| Example: GMT, E,8# (Means East +8 zone, no half-time zone) GMT, W,9,30# (Means West -9.5 zone, has half-time zone) A: E / W, E: East time zone, W: West time zone B: 0 ~ 12; whole time zone C: 0/15/30/45, half time zone
Set the angle upload| ANGLEREP, X, A, B#| Example: ANGLEREP, ON,30,3# (This means the tracker will send a data supplement when the angle change exceeds 30 degrees and lasts for 3 seconds) X=ON/OFF, default： ON; A=5～180 degrees, diversion angle degree, default: 30 degrees； B=2～5 seconds, detecting time, default: 3 seconds,
ANGLEREP, OFF#| CANCEL UPLOAD ANGLE OK
Mileage Statistics| MILEAGE, A, B#| Example: MILEAGE, ON,5000# (Means enable the mileage statistics feature, the mileage initial value is 5000km) A=ON/OFF, On/Off mileage calculation, default: Off B=0～999999， Mileage initial value, unit： km; default: 0, mileage return to zero
MIELEAGE#| Query current mileage

Add SOS Administrator Number

|

SOS,A,1st number,2nd number, 3rd number#

| Example:

Set 3 numbers at a time: SOS,A,13800138000,13800138001,13800138002#

Set the first number separately: SOS,A,13800138000#

Set the second number separately: SOS,A,,13800138001#

Means to set 3rd number separately:

SOS,A,,,13800138002#

---|---|---

Delete SOS Administrator Number

|

SOS,D,1st number,2nd number, 3rd number# or SOS,D,1,2,3#

| Example:

Directly delete the number: SOS,D,13800138000#

Delete 1st number: SOS,D,1#

Delete 2nd number: SOS,D,2#

Delete the 2nd and 3rd number: SOS,D,2,3#

Add Center Number

|

CENTER,A,center number#

| Example: CENTER,A,008613800138000# (Means

the tracker will just can be controlled by this number 008613800138000, 0086 is country code)

NOTE:

1. Please set up the center number with the country code as prefix!

2. After set up center number, the tracker will just can be controlled by center number, it will not reply commands from other numbers!

Delete Center Number

|

CENTER,D#

|

DEL CENTER OK

Data Upload Time Interval

|

TIMER,T1,T2#

| Example: TIMER,5,180# (Means the tracker will upload data every 5s when ACC is on and 180s when ACC is off)

T1 ranges 0/5~18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 10; T2 ranges 0/5~18000 (seconds), upload interval when ACC OFF, default is 10;

Heartbeat Packet Upload

|

HBT,time#

| Example: HBT,3# (Means the tracker will send heartbeat data package to server every 3 min for connection maintenance)

NOTE: Range :1-60min, default 3min.

Sensor Sensitivity

|

LEVEL,A#

| Example: LEVEL,2# (Means set up the shake sensor level to 2)

NOTE: A：Sensitivity Level 1-9 (1-9 is from week to strong vibration)

Arm manually| ARM#| Set the device into arm mode

Disarm manually

|

DISARM#

|

Set the device out of arm mode

Cut Off / Resume Fuel|

RELAY,A#

| A=1/2;

1: Enable relay immediately 2: Enable relay safely

For Example:

1. RELAY,1#

A is set to 1, the relay command will be executed immediately.

2. RELAY,2#

A is set to 2, the relay command will be executed safely. The vehicle is safe only when the speed is lower than 20km/h if GPS is fixed, or the vehicle is stationary if GPS is not fixed.

---|---|---
RELAY,0#| RESUME FUEL OK
Inquiry Commands
Functions| Command Format| Explanation
Version Inquiry| VERSION#| Device Reply Example: ID:9301074948 IMEI:354188046912460 ICCID:898602A51314F1298017

VERSION:MV930G_V2.0.2 BUILD:OCT 19

2016 16:31:00

Parameter Inquiry| PARAM#| Device Reply Example： ID:9301074948

IMEI:861157040411486 APN:CMNET IP:47.254.77.28:7700 TIMER:10,180 SPEEDLIMIT: 120km/h ANGLERPT: 30′

CENTER: 13428768257 SOS:13267052361,13488888888,13599999999 GMT:E8.00

Latitude&Longitude Inquiry| WHERE#| LAT:N23.02930,LON:E114.32180,COURSE:0.00,S PEED:0.00KM/H,DATETIME:2015-05-23 14:39:11
Map URL Inquiry| URL#| http://map.google.com/?q=22.557868,113.935090

<0.0km/h 0.0> <2014-12-12 07:32:13> IMEI:354188047752402

Address Inquiry| POSITION#| NOTE: The reply message’s language is determined by the device’s language setting, if get position content fails, the device will reply Google Map location link.
Status Inquiry| STATUS#| BATTERY: XX% (Built-in Battery Power Percent)

INTERNET: CLOSED (No Network)

FAILED (Connecting Network or Failure)

SUCCESS (Connected to Network）

NET: NONE (No celluar Signal), HIGH / MED / LOW (Signal Strength) , 18(Signal value) GPS: CLOSED (GPS Module Closed); FIXED,N (Positioned and satellite number); UNFIX,0 (Not Positioned yet)

SPEED: 30KM/H

ACC: ON / OFF (ACC on or off)

RELAY: ON / OFF (Relay on or off)

POWER: CONNECTED / DISCONNECTED

(1P2o.5wVe(rVCeohnicnleecbtaetdteorryDvioslctoagnen)ected),

SENSOR: ON/OFF (S sor on or off), LEVEL: 3 (Sensitivity level 1-9) STATE: ARM (Arm or Disarm)

---|---|---
Alarms Parameters| ALARM#| ID: 19172012644 (ID number of device)

STATE: ARM(DISARM)(Defense status of device) SPEED: ON/OFF(alarm status); 30km/h(alarm value);alarm way

SHIFT: ON/OFF(alarm status); 300m(alarm value);alarm way

VIBRATE: ON/OFF(alarm status);3(sensitivity level);alarm way

ACC: ON/OFF(alarm status); 0/1/2(0: ACC ON, 1: ACC OFF; 2: ACC ON&OFF) (alarm situation); alarm way ; ;

POWER DOWN: ON/OFF(alarm status);alarm way LOW VOLTAGE: ON/OFF(alarm status);alarm way NOTE: Alarm Ways: 0/1/2 ( 0 : SERVER only, 1: SMS+GPRS, 2 : GPRS+SMS+CALL )

Alarm Commands
Functions| Command Format| Explanation
Overspeed Alarm Setting| SPEED,A, B,M#| Example: SPEED,ON,100,1# (When the speed of the tracker exceeds 100km/h it will send an alarm message via SMS and server)

A=ON/OFF, enable or cancel over speed alarm, default: OFF

B=1～255(km/h), speed limit, default：100(km/h); M=0/1/2, way of alarm, 0 : Server only, 1:

SMS+Server, 2: SMS+Server+Call default：1.

SPEED,OFF#| CANCEL THE OVERSPEED ALARM OK

Vibration Alarm Setting

|

SENALM,A,M#

| Example: SENALM,ON,2# (Means enable the vibration alarm, and the alarm message will be sent via SMS, server and call once it is triggered)

A=ON/OFF, default: OFF;

M=0/1/2, way of alarming, 0 : Serveronly, 1: SMS+Server, 2 : SMS+Server+Call, default:2

---|---|---
SENALM,OFF#| CANEL VIBRATE ALARM OK

Shift Alarm Setting

|

SHIFT,A,B,M#

| Example: SHIFT,ON,300,1# ( Means Setting 300 meters shift alarm range, when the ignition turned off, vehicle’s 300 meters’ shift will trigger the alarm, the alarm message will be sent via SMS and server )

A=ON/OFF; default:ON

B=Shift Distance (Range: 100-9999m)

M=0/1/2; way of alarm, 0 : Server only, 1: SMS+Server, 2: Server+SMS+CALL, default:1

SHIFT,OFF#| CANCEL SHIFT ALARM OK

Auto Arm By ACC

|

ACCARM,ON,M#

| Example: ACCARM,ON,60# (Means when the engine turned to off status, the tracker will enter into arm status automatically after 60s)

Arm Time: M=5-1800s, default: 60s

ACCARM,OFF#| Close auto arm function

ACC Status Change Alarm

|

ACCALM,A, B,M#

| Example: ACCALM,ON,2,2# (Means enable this alarm type, tracker will send alarm message via SMS, server and call when engine start and flameout)

A=ON/OFF, Default: ON;

B: 0/1/2; 0: ACC ON Alarm; 1: ACC OFF Alarm; 2: ACC

ON&OFF Alarm; Default:2

M: 0/1/2 (way of alarm): 0 : Server only, 1: SMS+Server, 2: SMS+Server+Call, Default:1;

ACCALM, OFF#| Cancel ACC alarm function
Power Disconnect Alarm| PWRALM,A,M#| Example: PWRALM, ON,1# (Means when the external power disconnects the tracker will send alarm message via SMS and server)

A=ON/OFF, default ON;

M=0/1/2, ways of alarming, 0: Serveronly, 1: SMS+Server, 2 :

SMS+Server+Call, default:2；

PWRALM, OFF#| Close the power disconnect alarm
Low Voltage Alarm Setting| LVALM,A, B,M#| Example: LVALM, ON,11.2V,1# (Means once the external power voltage is less than 11.5v the tracker will send an alarm message out via SMS and server)

A=ON/OFF, default： ON;

B=9-95 V, Low voltage threshold, can be a decimal, such as

12.5 V

M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2: SMS+GPRS+Call,default:1

LVALM, OFF#| CANCEL LOW VOLTAGE ALARM OK
Open Door Alarm Setting| DOORALM,A, M#

———————

DOORALM, OFF#

| Example: DOORALM,ON,1# (Means once the door open the alarm message will be sent out via SMS and server) A=ON/OFF, default： ON;

M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2:

SMS+GPRS+Call,default:1；

---|---|---

Any Questions?

• E-mail: support@micodus.com.
• Skype: MiCODUS

Download the APP

Search “MiCODUS” in the iOS APP store or Google Play Store, or just scan the QR code below to download the MiCODUS APP:

Copyright ©2023 MiCODUS | All Rights Reserved Learn how to set up your new MiCODUS Tracker.

References

• Spionlink - SIM Card Service | Prepaid Data Plan | GPS Tracker Supplier

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>