Titopena XL30 Toyota Sienna Side Step Instruction Manual
- June 1, 2024
- Titopena
Table of Contents
Titopena XL30 Toyota Sienna Side Step
Product Specifications:
- Product Name: Side Step for Car
- Material: High-quality steel
- Color: Black
- Dimensions: Various sizes available to fit different car models
- Weight Capacity: Up to 300 lbs
Installation Instruction
- Product Name: Side Step
- Fit For : Toyota Sienna
Note
Please read the instructions carefully before install the side step. Keep the
appearance of the car clean and avoid scratched. Check the side step regularly
.
Right Side Step
Installation procedures
Installation Steps:( Taking The Right Step as an Introduction)
- Remove the original side beam from front to rear ,you will see a row of weep holes.
- Install the side step to the bodywork
- Install the brackets:(Take the three right brackets as an Introduction)
Bracket Installation Hole
- Please find out the weep hole for the Right- Front bracket,20CM away from the front end of side Beam. Then remove the plug in the weep hole and use 12mm T-screw; Fix the front and back of the Right-Front bracket on the car body with the 12mm T-scew and 10mm Nibbed Screw respectively.
- Please find out the weep hole for the Right-Middle bracket,110CM away from the front end of the side beam. Then remove the plug in the weep hole and use 8mm T-screw;Fix both the front and back of Right-Mid bracket with 8mm T-scew.
- Please find out the weep hole for the Right-Rear bracket,190CM away from the front end of the side beam.Then remove the plug in the weep hole and put in 12mm T-screw,and then fix the Right-Rear bracket on the car body with it. 4Completed!
Product Usage Instructions:
Step 1: Removing the Original Side Beam
Remove the original side beam from front to rear until you see a row of
weep holes.
Step 2: Installing the Side Step
Attach the side step to the bodywork securely.
Step 3: Installing the Brackets
Right Front Bracket Installation:
- Locate the weep hole for the Right-Front bracket, which is 20cm away from the front end of the side beam.
- Remove the plug in the weep hole and use a 12mm T-screw to fix the front and back of the Right-Front bracket on the car body with a 12mm T-screw and a 10mm Nibbed Screw respectively.
Right Middle Bracket Installation:
- Find the weep hole for the Right-Middle bracket, which is 110cm away from the front end of the side beam.
- Remove the plug in the weep hole and use an 8mm T-screw to fix both the front and back of the Right-Middle bracket.
Right Rear Bracket Installation:
- Identify the weep hole for the Right-Rear bracket, located 190cm away from the front end of the side beam.
- Remove the plug in the weep hole and insert a 12mm T-screw to fix the Right-Rear bracket on the car body.
Step 4: Completion
Once all brackets are securely installed, your side step installation is completed!
Frequently Asked Questions (FAQ):
-
Q: Can I install the side step on my own?
A: Yes, you can follow the installation steps provided in the manual to install the side step on your car. -
Q: What tools do I need for installation?
A: You will need T-screws, Nibbed Screws, and basic tools like a screwdriver for installing the side step. -
Q: Is the side step compatible with all car models?
A: The side step comes in various sizes to fit different car models. Ensure to select the correct size for your vehicle.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>