avatar CONTROLS Wifi Smart Bulb User Manual

CONTROLS Wifi Smart Bulb
User Manual

service@avatarcontrols.com

Preparation content

• AvatarControls APP (Also compatible with the “smart life” app)
  

• AvatarControls APP account (users need to register their own account)

• Smart Bulb

• Reset switch on-off-on-off-on within 10 seconds Until the bulb fast flashing state. If not operate within 3 minutes, the bulb will restore to stable white light.

• 2.4 GHz WiFi environment (turn off 5GHz)

Add device

2.1. Download AvatarControls APP
https://smartapp.tuya.com/avatarsmarthome

• Please download AvatarControls APP first:
• Please scan the OR Code, or get AvatarControls downloaded from App Store, Android Market

2.2. Register an account in AvatarControls

• Open AvatarControls into account registration page, click on the”Register”
• At the registration page, select your region and enter the email to create a new account (Phone number is not available)
• After successful registration, you can add device on your App now

2.3.Add devices ( Smart Bulb)

• After login to AvatarControls APP, click on “+”.

• AvatarControls APP supports two types of distribution network modes: EZ mode and AP mode.

• EZ mode: The Smart Bulb is in a state of fast flashing .(About two times a second) .

• AP mode: The Smart Bulb is in a state of slow flashing .(About once 2 seconds) If the bulb can not be paired in EZ mode(rapid blink), please switch to AP mode(blink slowly)

• After entering the “Add Device” page, confirm whether the Smart Bulb is EZ mode. if not, can switch to EZ mode by a continuous operation of “on-off-on-off-on” . Then click on “indicator light is flashing fast” to start adding Smart Bulb.

• Select the Device Work Wi-Fi and enter the password, then start the configuration of the device. “Device added Successfully” will be displayed after a successful operation. 2.4.Rename the device
  

• After the device be added successfully, click the device description text to modify device name. The name of the device is recommended to use easy pronunciation of the English words. (Amazon Echo only supports English temporarily).
  

• Multiple devices can be added and renamed according to the above procedures.

Control Your Smart Bulb with Alexa/Google Assistant Before you start, make sure that:

• Your smart bulb is connected with will and can be controlled by app.
• You have an Alexa-enabled device (Le Echo, Echo Dot and Amazon Tap) or a device enabled with Google Assistant (i.e. Google Home).
• The Amazon Alexa app or the google Home app which is already installed on your smart device and you have created an account.

To control your devices with Amazon Alexa

1. Open the Alexa app and select SklIls&Game from the menu in the top left corner of the homepage.
2. On the Skills&Game screen, search forAvatar-Controls”.
3. Enable It in Alexa app.
4. Login with your AvatarControls account to autho-rize Alexa to access to your account.
5. Discover new smart devices via the “Smart Homes menu in the Alexa app or Alexa voice control.
6. Say simple commands to Alexa: “Alexa, turn on/off bedroom light (Turn on/off the light)”

“Alexa, set bedroom light to 50 percent (Set the light to any brightness)”
“Alexa, brighten/dim bedroom light. (Increase/ weaken the brightness of the light)”
“Alexa, set bedroom light to green. (Adjust the color of the light)”

To control your devices with Google Assistant

1. Open the Google Home app and select °Settings° on the home page.
2. Find “More Settings° on the bottom of the page.
3. Choose “Devices”, and Tap the “+” add, then you will Into”And a device “page. Click “Link a Smart home device”, and “Q” Icon, Input “AvatarControls”
4. Logln with your Avatar Controls account to authorize Google Home to access to your account.
5. After successful configuration, say simple comm-ands to Google Assistant to control the light with your voice.

“Ok Google, turn on/off bedroom light. (Turn on/off the light or other device)”
“Ok Google, set bedroom light to 50 percent (Set the light to any brightness)”
“Ok Google, brighten bedroom light. (Brighten the light)”
“Ok Google, set bedroom light to red. (Set the color of the light, only color changing lights support this function)”

Troubleshooting

1. Cannot connect to Wi-Fi

• Check if you have selected a 2. 4 Ghz will which is the same that your phone is connected with. (If your router is dual band make sure your phone and the smart bulb are connected to the 2. 4 G signal.)
• Check if you have entered the correct Wi-Fi password.
• Check if there are any Internet problems.lf nece-ssary, reset your Wi-Fi router and try again.

2. Cannot control the devices with Alexa/Google voice control

• Check if you have enabled “AvatarControls” in Alexa or Google APR
• Check if the bulb is online on the app(Do not turn off the bulb through your wall switch otherwise it will go offline.)
• Check if you are using proper commands when talking to Alexa/ Google Assistant, repeat your question, speak clearly to Alexa/Google Assistant in English.
• Check if you have modified the name of of the bulb in “AvatarControls” app. If yes, you need to rediscover the devices through Alexa/Google app

Notice

• Please check if there is damage caused by tran-sportation. If broken, please contact supplier for replacement.
• Please follow the instruction and notice to keep product in a good and safe use condition.
• Do not disassemble or reinstall the bulb:

Please be assured that we always provide a 12-month warranty(replace or refund) that covers any quality or manufacturing related issue.
Any supports, please send your order number and issue to seMce@avatarcontrols.com directly. We will process your case within 48 hours, thank you-
https://www.youtube.com/channel/UCsGqB4IKW1NmZlK2mfBBAww/videos
Contact: service@avatarcontrols.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>