GENESIS PV58 Mangan PC Wireless Gamepad Installation Guide

: June 3, 2024
: Genesis

Table of Contents

PRODUCT & SUPPORT INFORMATION
LED INDICATIONS
REGULATORY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Mangan PC Wireless Gamepad
Installation Guide

GENESIS PV58 Mangan PC Wireless Gamepad -

PRODUCT & SUPPORT INFORMATION

© GENESIS. All rights reserved. GENESIS name and logo, and all related product and service names, design marks and slogans are the trademarks or registered trademarks
of GENESIS. All other product and service marks contained herein are the trademarks of their respective owners. | V.2280

http://www.genesis-zone.com/support

DOWNLOAD SOFTWARE ON OUR WEBSITE
www.genesis-zone.com/support

© GENESIS. All rights reserved. GENESIS name and logo, and all related product and service names, design marks and slogans are the trademarks or registered trademarks of GENESIS. All other product and service marks contained herein are the trademarks of their respective owners.
PACKAGE CONTENT

GENESIS PV58 Mangan PC Wireless Gamepad - Fig

REQUIREMENTS : Console or PC with a USB port
Windows® XP/Vista/7/8/10/11
Sony® PlayStation® 3
INSTALLATION

Connect wireless USB adapter to your PC or console.
Press the Genesis button, until diodes start to blink.
Gamepad is ready to use, when diodes shine without blinking.

LED INDICATIONS

X-input mode – the second LED glows solid
D-input analog mode – the fi rst and second LEDs glow solid
D-input digital mode – the first LED glows solid
Pairing – 4 LEDs flash quickly
Charging – 4 LEDs flash slowly
Battery fully charged – 4 LEDs are off

SWITCHING BETWEN X-INPUT AND D-INPUT MODES

To switch between X-Input and D-Input modes while gamepad is connected to PC, press Genesis button for 8 seconds.
If in Control Panel gamepad is detected as USB gamepad it means it works in D-Input mode.
If in Control Panel gamepad is detected as Controller (XBOX 360 for Windows), it means it works in X-Input mode.
On the console gamepad is automatically detected in D-Input mode, and there is no possibility to change that.
Vibrations work in X-Input mode.

CHARGING

Gamepad charging time: 3 hours (may vary depending on the charger used
– we recommend charging the gamepad using the cable included in the set).
We recommend switching the gamepad off for charging.

Note: The device is equipped with intelligent technology for energy management. When the device enter into hibernation (sleep) mode, press any button for its revival.

REGULATORY

EU Declaration of Conformity – Hereby, IMPAKT S.A. declares that that the equipment type NJG-0693 is in compliance with Directives 2014/53/ EU, 2011/65/EU and 2015/863/EU. The full text of the EU declaration of conformity is available via the product tab at www.impakt.com.pl.
Frequency range: 2405 – 2475 MHz

Maximum radio-frequency power transmitted: 0.5 mW
The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was madeIn order to get detailed information about recycling this product please contact your retailer or a local authority.
SAFETY INFORMATION

Use as intended, improper usage may break the device.
Non-authorized repairs or disassembly voids the warranty and may damage the product.
Dropping or hitting the device may lead to device being damaged, scratched or flawed in other way.Do not use the product in low and high temperatures, in strong magnetic fields and in the damp or dusty atmosphere.
Do not use the product in low and high temperatures, strong magnetic fields and damp or dusty surroundings.

GENERAL