EBECO F-10 Self Regulating Heating Cable Instruction Manual
- July 2, 2024
- EBECO
Table of Contents
F-10 Self Regulating Heating Cable
Instruction Manual
F-10 Self Regulating Heating Cable
Manual Ebeco F-10 self-confided heating-cable (E89 604 60)
Use-areas: Frost- protection for pipe and flexible tube, external and internal
laying
Ebeco F-10 frost-protection cable is adapted mainly for water- and draining
pipe, both external and internal. Due to the self-regulating construction the
heating cable can be cut and transposed for perfect adaption to the pipeline,
without risk of overheating. The cable changes the power output by it self
after environmental temperature and the way it was installed. The cable always
emits power and always gives heightened water temperature.
To get an energy-saving construction the heating-cable is to be controlled by
a thermostat (E 85 816 10). F-10 is meter-labelled and approved for drinking
water including the accessories Silicon Connection/disconnection Set (89 604
19) and Supplementary Set F-10 (89 604 10).
For internal installation: Complete with E 89 604 10 completion-kit F-10
internal-installation.
| Connecting-voltage: | 220–240 V |
|---|---|
| Max connecting-length 10 A/16 A (0 °C): | 100 m/115,5 m external installation |
61,5 m/89,5 m internal installation
Rating:
At internal installation the F-10 protects a 32 mm pipe with 20 mm insulation
down to -30 °C. At external installation with the above conditions the cable
protects down to -20 °C. At higher power output demands, or larger dimensions,
make coils of the cable or install it double, alternately lay a thicker
insulation.
EBECO AB, Lärjeågatan 11, 415 02 Göteborg, Sweden, +46 31-707 75 50,
info@ebeco.se
www.ebeco.se
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>