EBECO 8581604 EB-Connect Wi-Fi Module User Manual
- June 1, 2024
- EBECO
Table of Contents
EBECO 8581604 EB-Connect Wi-Fi Module
Specifications
- Frequency Band: 2.4 GHz
- Max Output: 20dBm
- Approval: CE
- Protocol: IEEE 802.11b/g/n
Product Information
The EB-Connect WiFi module from Ebeco allows you to control the heat in your space conveniently using the Ebeco Connect app or the open-source API. This accessory provides seamless integration with your heating system, offering flexibility and ease of use.
Product Usage Instructions
- Lift the front panel and frame by pushing a screwdriver into the groove on the underside.
- Use a screwdriver to gently loosen the front panel.
- Press in the wifi module until you hear a click.
- Replace the front panel by hooking it into the lower part and pushing in the upper part until you hear a click.
- Your thermostat will start automatically. If it was turned off during installation, press X and follow the on-screen instructions.
For Wallflex 500
- Download the Ebeco Connect app from Google Play or App Store and follow the instructions to set up Wallflex 500.
FAQ
- Q: Where can I find the full documentation of conformity for the product?
- A: You can access the full documentation of conformity for the product by visiting the following link: Documentation of Conformity
- Q: What is the warranty coverage for the wifi module?
- A: Ebeco AB provides a 5-year product warranty for material defects on the wifi module. For detailed warranty terms, please refer to ebeco.com.
Thank you for choosing Ebeco! Good luck with your WiFi Ready product. We hope
you will enjoy it for a long time to come.
With this accessory, you can easily control the heat with our app, Ebeco
Connect or with the open-source API. Ebeco Connect can be downloaded from
Google Play or App Store.
Warranty
- Ebeco AB provides a 5-year product warranty for material defects on the wifi module.
- For more detailed warranty terms, see ebeco.com.
- The product complies with Directive 2014/53/EU.
- Full insurance is available on Ebeco’s website.
What to do EB-Therm 500
- Lift the front panel and frame by pushing a screwdriver into the groove on the underside, see picture. Lift the front panel upwards until you hear a “click”.
- Use a screwdriver to gently loosen the front panel.
- Press in the wifi module until you hear a “click”.
- Replace the front panel by first hooking it into the lower part, see picture. Then push in the upper part of the front with your thumb until you hear a “click”.
- Your thermostat will now start automatically. If your thermostat was turned off when the wifi module was installed, you must first press X. Follow the on-screen instructions.
What to do Wallflex 500
Download the Ebeco Connect app from Google Play or App Store and follow the instructions.
Technical facts
- Frequency band: 2,4 GHz
- Max output: 20 dBm
- Approval: CE
- Protocol: IEEE 802.11b/g/n
This product uses open-source software.
For more information see ebeco.com. Updated automatically.
CONTACT
EBECO AB
- Lärjeågatan 11
- 415 02 Göteborg
- SWEDEN
- +46 31 707 75 50
- info@ebeco.se.
- ebeco.se.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>