CommScope C1004 10G Epon Bridging Onu User Manual

: July 27, 2024
: CommScope

Table of Contents

CommScope C1004 10G Epon Bridging Onu User Manual
FEATURES
NETWORK PARAMETERS
FUNCTIONAL SPECIFICATIONS
GENERAL SPECIFICATIONS
LED INDICATORS
OPTICAL FIBER CLAMP / SECURITY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CommScope C1004 10G Epon Bridging Onu User Manual

CommScope-C1004-10G-Epon-Bridging-Onu-product

CommScope’s C1004 Bridging ONU (Optical Network Unit) provides user interfaces to an EPON or 10G EPON optical network. User interfaces include 4ea GE ports, each capable of independent full 1GE throughput, in a package suitable
for wall, desk, or flat surface mounting.

FEATURES

Supports all EPON rates:
- 10Gbps / 10Gbps
- 10Gbps / 1Gbps
- 2Gbps / 1Gbps (Turbo mode)
- 1Gbps / 1Gbps
CableLabs DPoE 1.0 and 2.0 compliant
Service policy enforcement per LLID with 16 bidirectional LLIDs
32 upstream queues / 64 downstream queues (16 queues per UNI port)
IEEE 802.1p with up to eight priority queues per LLID
IEEE 802.1D bridging
IEEE 802.1Q VLAN mapping to LLIDs
L2/L3/L4 line-rate packet processing supporting classification, modification, filtering, and custom rule-table processing
44 programmables ins per ling or bill port with 16 priority levels
VLAN tag translation, Q-in-Q, tag addition/deletion, and modifications for 4K VANS
Unicast, broadcast, and multicast traffic support
IGMP v2/MLD v1 and IGMP v3/MLD v2 snooping
IPv4 and IPv6 support
Selectable encryption mode per LLID:
- IEEE 802. 1ae (128-bit AES) bidirectional
IEEE OAM, DPOE 1.0 OAM, and Operator OAM
Selectable encryption mode per LLID:
IEEE 802.1ae (128-bit AES) bidirectional
IEEE 802.1X authentication
IEEE 802.3ah frame-based FEC and IEEE 802.3av stream-based 10G FEC
4K MAC address learning table for 802.1D bridging

HARDWARE

ITEM	DESCRIPTION
Mounting	Wall, desktop, under desk, flat surface mounting
Physical Dimensions	Dimensions
Weight	700g

Interface

Front Panel LED

PHYSICAL INTERFACES

| NAME| CONNECTION| | DESCRIPTION
---|---|---|---|---
ON/OFF switch| | Power On / Off
Power Jack| DC 12V| Input terminal for power adaptor connection
LAN 1/2/3/4| RJ-45| Connected through a LAN port UTP cable
Line| SC/UPC| EPON port

OPTICAL SPECIFICATIONS, RX

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---
PON Input Power, maximum| -3.0 dBm|
PON Input Power, maximum| -26.5 dBm|
PON Wavelength, nominal| 1577.00 nm (10G) or 1490.00 nm (1G)|

OPTICAL SPECIFICATIONS, TX

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---
Bit Error Ratio, maximum| 10-10|
Laser Type| Distributed feedback (DFB) Class 1|
Output Power Range| 0–4 dBm|
Wavelength, nominal| 1270.00 nm (10G) or 1310.00 nm (1G)|

ELECTRICAL SPECIFICATIONS

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---

Electromagnetic Compatibility/Interference

V1.7.1 | EN 301 489-1 V1.9.2 | EN 55022

Class B | EN 60950-1 | IC RSS-210, Issue 8

| IRAM | UL 60065 | US FCC Part 15

Subpart C

Output: 12VDC, 3A

|

ENVIRONMENTAL SPECIFICATIONS

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---
Operating Temperature| ****

0 °C to +50 °C (+32 °F to +122 °F)

|
Relative Humidity| 20%–80%, non-condensing|

ENVIRONMENTAL SPECIFICATIONS

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---
Ethernet Ports, UNI| ****

IEEE 802.3 (10/100/1000 Base-TX)

shipped)

DHCP

DHCP Client
DHCP Server
In NAT mode, the IP will be assigned from the IP the pool of the device; in Bridge mode, the IP will be assigned from the network DHCP server
DNS/DNS Proxy

MULTICAST PARAMETERS

IGMP v1/v2/v3
IGMP Snooping
IGMP Immediate Leave on/off
IGMP Proxy

NAT/NAPT

Selectable between NAT and bridge modes
Dynamic/static private IP in NAT mode
Port Forwarding and DMZ Host functions
8,000 bi-directional concurrent sessions (maximum, full-wire-speed)

QOS

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---

Classification

| Physical port 802.1p

SRC/DST IP address TOS/DSCP

TCP/UDP SRC/DST port

|

Layer 1, 2, 3, 4

Marking| 802.1p DSCP| Layer 2, 3
Scheduling| SPQ| 3 Queues per interface

Rate limiting (±10%)
QoS for both upstream and downstream

MANAGEMENT

TR-069 compliant
System or module LED
Local and remote Firmware Upgrade (The existing Image should be kept when the upgrade fails).
A normal session for a system management event with CPU overload
Remote Management
Remote access through Telnet (RFC 854, 855)
CPE Management Server
Device Reset
Setting and changing Config
Firmware download via Web Server
Time sync via NTP server
Device status and performance management

SECURITY

Broadcast storm control
MAC filtering
IP filtering

IPV6

Dual-stack
ICMPv6
DHCP Server and IPv6 addressing (stateful/stateless address)

FUNCTIONAL SPECIFICATIONS

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---
PON Standards| IEEE 802.3

IEEE 802.3av (10G)

| Layer 1, 2, 3, 4
Technology Types| EPON

10G UPON

| Layer 2, 3

GENERAL SPECIFICATIONS

| PARAMETER| SPECIFICATION| | COMMENTS
---|---|---|---|---
Installation| Desktop, Wall, Under Desk, Flat Surface|
Location| Indoor|
Warranty| One year|

LED INDICATORS

| LABEL| | DESCRIPTION| STATUS| | INDICATION
---|---|---|---|---|---|---

PWR

| ****

Power supply LED

| Green On| Power is fed.
Yellow On| When the fed power is either over (i.e. above 13.2V) Or under (i.e. below 9.6V) the voltage limit.
OFF| No power is fed.

PON

| ****

Authentication LED

| Green On| 10G Link On
Blue On| 1G Link On
OFF| Link Off

LOS

| ****

Loss of Signal

| Red On| PON Link is NOT established properly.

Or, the continuous optic signal is detected.

OPTICAL FIBER CLAMP / SECURITY

CommScope-C1004-10G-Epon-Bridging-Onu-fig-1

2014 CommScope, Inc. All rights reserved. All trademarks indentified by or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.

Download PDF:CommScope C1004 10G Epon Bridging Onu User Manual