monstertech MFD, Tablet Mount Center Instruction Manual
- June 28, 2024
- Monstertech
Table of Contents
MFD, Tablet Mount Center
“`html
Specifications:
- Universal connector: M8x30
- Profile cap assembly dimensions: 35mm x 35mm x 25mm
- Mountable devices: VESA 75, VESA 100, Logitech G Flight
Instrument Panel, Thrustmaster Cougar MFD Keyboard Clamp, Tablet or
phones
Product Usage Instructions:
Assembly:
-
Ensure you have all the necessary parts as listed in the
manual. -
Use the hex key set with ball head to assemble the parts.
-
Follow the instructions to connect the universal connector and
slot nuts. -
Adjust the desired angle of inclination and tighten the screws
on both sides.
Mountable Devices:
-
VESA 75: Follow standard VESA mount
instructions for installation. -
Logitech G Flight Instrument Panel: Attach
using provided screws and nuts. -
Thrustmaster Cougar MFD Keyboard Clamp: Remove
the original bracket before mounting. -
Tablet or phones: Secure using appropriate
mounts or clamps.
FAQ:
Q: What devices are compatible with the mount?
A: The mount is compatible with VESA 75, VESA 100, Logitech G
Flight Instrument Panel, Thrustmaster Cougar MFD Keyboard Clamp,
Tablets, and phones.
Q: Are spare parts available for purchase?
A: No, extra or spare parts are not listed. Please ensure all
parts are included before assembly.
Q: Is the product suitable for children?
A: The product contains small parts and is not suitable for
children under 3 years. It is recommended for children over 12
years and adults.
Q: What is the warranty and liability information?
A: The product is designed for use with a computer controller.
Please check all screws before usage. MTSIM shall be liable for
damage only in specific circumstances as outlined in the
manual.
“`
MFD/TABLET MOUNT CENTER
Instruction Manual Bedienungsanleitung
Mode d`emploi
GENERAL ASSEMBLY INFO AND HOW TO
PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
2
UNIVERSAL CONNECTOR
slot nut M8
universal connector
M8x30
ALTERNATIVE
universal connector
M8x30
very loose pre-assembled
slide in
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
3
extension for better tightening
force
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
35
35
25
25
M8x35 M8x35 M8x25 M8x25
8 8 8 8
PROFILE CAP ASSEMBLY
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
4
Ø 3
12,5
PARTS
1x
1x
4x
35
4x
Ø3,2 Ø7
4x
M3
8
2x
14
2x
8,4 16
2x
M8
[dimensions in mm / different scales] No extra or spare parts listed!
5
2x
12
2x
Ø5,5 15
2x
M5
4x
4x
8 5
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
5
DIMENSIONS
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
6
ASSEMBLY
2x M5x12 flat head black
2x M5 nut
2x Washer Ø15
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
7
slot nut M8
threaded holes
slot
oriented
nut
to the top
M8
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
8
M8x14 black
washer black
washer black
M8x14 black
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
9
Adjust the desired angle of inclination and
tighten the screws on both sides.
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL 10
MOUNTABLE DEVICES (Color coded)
VESA 75
Logitech G Flight Instrument Panel
STREAM DECK Mini STREAM DECK M.K.2 / Live STREAM DECK PLUS STREAM DECK XL
VESA 100 Thrustmaster Cougar MFD Keyboard Clamp
Tablet or phones
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL 11
THRUSTMASTER COUGAR MFD
Before this step remove the original bracket (without picture).
original screws MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL 12
THRUSTMASTER MFD/TABLET COMBO
remove rubber screws
4x washer
4x nut M3
4x M3x35
4x 12,5 mm spacer
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL 13
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL 14
ELGATO STREAM DECK MINI
4x M4x12
4x M4 nut
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL 15
ELGATO STREAM DECK MK.2 / LIVE
Other Stream Deck Versions can be assembled the same way.
4x M4 nut
4x M4x12
Insert the wedge for using with STREAM DECK LIVE. Not needed for STREAM DECK
MK.2!
MTSIM MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL 16
LOGITECH G FLIGHT INSTRUMENT PANEL
4x washer
4x M3x35
4x M3 nut
17-05-2024
WARNING NOTICES
CAUTION! Check before usage if all screws are tightened. CAUTION! Check before
usage that the mounting plate is screwed on tight after making height
adjustments.
DANGER: Contains small parts not suitable for children under 3 years. Only
suitable for children over 12 years and adults.
All MTSIM products are hand assembled and quality checked. The mount is
designed for usage only with a computer controller (e.g. joystick or
throttle). We exclude liability if the product is used for purposes other than
intended.
MTSIM shall be liable for damage arising from causes other than the detriment
to life, body and health only to the extent that such damage arises from
wilful misconduct, gross negligence or the culpable violation of a fundamental
contractual obligation on the part of MTSIM or a vicarious agent (e.g. the
delivery service) of MTSIM. Any further liability for damages shall be
excluded.
If you have safety concerns or questions regarding assembly, contact us under
info@mtsim.com or visit www.mtsim.com/en/
WARNHINWEISE
VORSICHT! Achten Sie darauf, dass vor Benutzung alle Schrauben immer fest
angezogen sind. VORSICHT! Achten Sie darauf, dass die Befestigungsplatte nach
der Höheneinstellung fest angezogen ist.
GEFAHR: Nicht für Kinder unter 3 Jahren, Kleinteile – Verschluckungsgefahr!
Nur für Kinder ab 12 Jahren und Erwachsene
Alle Produkte der Firma MTSIM sind handgefertigt und qualitätsgeprüft. Die
Halterung ist nur zur Verwendung in Kombination mit einem PC Controller (z.B.
Joystick oder Schubreglers) ausgelegt. Wir übernehmen keine Haftung für
zweckentfremdete Benutzung.
Für andere als durch Verletzung von Leben, Körper und Gesundheit entstehende
Schäden haftet die MTSIM lediglich, soweit diese auf vorsätzlichem oder grob
fahrlässigem Handeln oder auf schuldhafter Verletzung einer wesentlichen
Vertragspflicht durch MTSIM oder eines Erfüllungsgehilfen (z. B. dem
Zustelldienst) der MTSIM beruhen. Eine darüber hinausgehende Haftung auf
Schadensersatz ist ausgeschlossen.
Bei Fragen zur Sicherheit oder Aufbau unserer Produkte, wenden Sie sich an
info@mtsim.com oder besuchen unsere Website unter www.mtsim.com
NOTICES DAVERTISSEMENT ATTENTION! Vérifiez que toutes les vises sont correctement serrées avant utilisation. ATTENTION! Après ajustement en hauteur de la plaque de montage, vérifiez que les vises sont correctement serrées avant utilisation. DANGER: Contient des petites pièces susceptibles dêtre avalées. Ne convient
pas aux enfants de moins de 3 ans. Utilisation appropriée pour enfants à
partir de 12 ans et adultes.
Tous les produits MTSIM sont fait main et on passés les contrôles de qualité.
La fixation est conçue uniquement pour une utilisation avec un joystick ou une
manette des gaz. Nous dégageons toute responsabilité pour toute utilisation
autre que celle prévue.
Pour les dommages engendrés autres que l’atteinte corporelle, à la vie et à la
santé, MTSIM n’est responsable que dans la mesure où ces dommages reposent sur
un acte intentionnel, une faute lourde ou la violation fautive d’une
obligation contractuelle essentielle par MTSIM ou par des agents délégués par
MTSIM. Une responsabilité allant au-delà en dommages et intérêts est exclue.
Si vous avez des questions concernant la sécurité ou l`assemblage, contactez-
nous a info@mtsim.com ou visitez www.mtsim.com/fr/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>