MONSTERTECH Winwing Mip Rail Mount Instruction Manual
- June 13, 2024
- Monstertech
Table of Contents
WINWING MIP RAIL MOUNT
Instruction Manual
GENERAL ASSEMBLY INFO AND HOW TO
PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
UNIVERSAL CONNECTOR
ALTERNATIVE
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
PARTS
BAG 5
ICE MAN setup
ASSEMBLY
UFC unit assembly for ICE MAN setup
UFC unit assembly for ICE MAN setup
ADJUSTMENTS
OPTION (parts must be ordered separately)
Shown here in combination with a Table Mount MIP but works with Rail Mount MIP
too.
PARTS (must be ordered separately)
Profile for mounting plates
Link for German orders.
Link for international orders.
Link for US orders.
The universal connectors are included if you order the profile.
Mounting plate
(comes with fitting screws and slot nuts)
Link for German orders.
Link for international orders.
Link for US orders.
ASSEMBLY
WARNING NOTICES
CAUTION! Do not clamp your fingers while attaching the rail mount.
CAUTION! Check before usage if all screws are tightened.
CAUTION! Check before usage that the instrument carrier is screwed on tight
after making adjustments.
DANGER: Contains small parts not suitable for children under 3 years.
Only suitable for children over 12 years and adults.
All MTSIM products are hand assembled and quality checked.
The mount is designed for usage only with a computer controller (Winwing MIP).
We exclude liability if the product is used for purposes other than intended.
MTSIM shall be liable for damage arising from causes other than the detriment
to life, body and health only to the extent that such damage arises from
wilful misconduct, gross negligence or the culpable violation of a fundamental
contractual obligation on the part of MTSIM or a vicarious agent (e.g. the
delivery service) of MTSIM. Any further liability for damages shall be
excluded.
If you have safety concerns or questions regarding assembly, contact us under
[email protected] or visit
www.mtsim.com/en/
References
- MTSIM – MONSTERTECH – Simulation Design – Official Website
- Joystick / Throttle Mounting Plate – MTSIM – MONSTERTECH
- Profile for Mounting Plates – MTSIM – MONSTERTECH
- Joystick / Throttle Befestigungsplatte – MONSTERTECH
- Profil für Befestigungsplatte – MONSTERTECH
- Joystick / Throttle Mounting Plate – MTSIM – MONSTERTECH USA
- Profile for Mounting Plates – MTSIM – MONSTERTECH USA