MONSTERTECH 0078 Flight Stand Instruction Manual
- June 4, 2024
- Monstertech
Table of Contents
MONSTERTECH 0078 Flight Stand
GENERAL ASSEMBLY INFO AND HOW TO
PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR
REQUIRED
UNIVERSAL CONNECTOR
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
PROFILE CAP ASSEMBLY
SCOPE OF DELIVERY
PEDAL EXTENSION SCOPE OF DELIVERY
ASSEMBLY
installation
intend to used
OPTIONAL PEDAL EXPANSION ASSEMBLY
Diminssion
WARNING NOTICES
CAUTION!
Do not clamp your fingers while assembling the flight stand.
CAUTION!
Check before usage if all screws are tightened.
CAUTION!
Check before usage that the mounting plates are screwed on tight after making
height adjustments.
DANGER:
Contains small parts not suitable for children under 3 years. Only suitable
for children over 12 years and adults. All MTSIM products are hand assembled
and quality checked. The mount is designed for usage only with a computer
controller (e.g. joystick or throttle). We exclude liability if the product is
used for purposes other than intended. MTSIM shall be liable for damage
arising from causes other than the detriment to life, body and health only to
the extent that such damage arises from wilful misconduct, gross negligence or
the culpable violation of a fundamental contractual obligation on the part of
MTSIM or a vicarious agent (e.g. the delivery service) of MTSIM. Any further
liability for damages shall be excluded. If you have safety concerns or
questions regarding assembly, contact us under
info@mtsim.com or visit
www.mtsim.com/en/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>