COMMSCOPE MP-PP13M-12C-96 PIM Optimized Adjustable Monopole Platform Installation Guide
- June 28, 2024
- CommScope
Table of Contents
- MP-PP13M-12C-96 PIM Optimized Adjustable Monopole Platform
- Product Information
- Specifications
- Product Usage Instructions
- General Notes
- Design Notes
- Manufacturing/Special Requirements
- Test
- Packaging
- Q: What should I do if I encounter hazards or obstructions
- Q: How should I tighten the bolts securing flat plates?
- Q: What is the EPA of each antenna pipe?
MP-PP13M-12C-96 PIM Optimized Adjustable Monopole Platform
“`html
Product Information
Specifications
-
Manufacturer: CommScope, Inc.
-
Model: MP-PP13M-12C-96
-
Material: Steel
-
Dimensions: Monopole – 15-45 inches O.D., Antenna Pipes – 2.88
inches diameter, Handrail Pipe – 2.88 inches diameter -
Weight: 2548.22 lbs
-
Volume: 9377.99 cubic inches
Product Usage Instructions
General Notes
All metric dimensions are in brackets [X.X]. For patent info,
visit cs-pat.com.
Design Notes
-
Identify hazards or obstructions before installing the
appurtenance. -
Fits monopoles with 15-45 inches O.D.
-
Center and evenly space antenna pipes.
-
Position mount or adjust safety climb cable to not hinder or
damage the safety climb.
Manufacturing/Special Requirements
-
Tighten all bolts securing flat plates using turn-of-nut
method. -
Pre-assemble mini kicker bracket to ring mount on the
ground.
Test
No specific test instructions provided in the manual text
extract.
Packaging
-
Packaging must meet CommScope requirements per document
IS-PL-3005. -
Printed document should be placed inside a polybag and then in
a shipping container. -
Extra hardware may be supplied, bagged, and shipped.
FAQ
Q: What should I do if I encounter hazards or obstructions
during installation?
A: Prior to installing the appurtenance, identify any hazards or
obstructions. Additional products may be required to maintain the
integrity of the safety climb. Temporary and/or permanent
precautionary measures should be taken to preserve the climbing
facility and/or safety climb.
Q: How should I tighten the bolts securing flat plates?
A: Tighten all bolts securing flat plates by using the
turn-of-nut method. Pay attention to leave equal distance and force
on each leg of the U-bolt. All fasteners should be tightened per
AISC 6.5.2.
Q: What is the EPA of each antenna pipe?
A: The EPA of a 2-7/8 x 96 antenna pipe is 1.84 ft^2 and with
1/2 inch ice thickness is 2.48 ft^2.
“`
4
3
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
1.2 FOR PATENT INFO: https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE
IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION,
TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO
PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
D
2.2 FITS MONOPOLES 15″-45″ O.D. 2.3 ANTENNA PIPES SHOULD BE CENTERED AND EVENLY SPACED.
2.4 POSITION MOUNT OR ADJUST SAFETY CLIMB CABLE SO NOT TO HINDER OR DAMAGE OR
OBSTRUCT THE SAFETY CLIMB. SAFETY CABLE ROUTING BRACKET MAY BE PURCHASED
SEPARATELY.
3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL
U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND
EQUAL FORCE ON EACH LEG OF THE U-BOLT. ALL FASTENERS SHOULD BE TIGHTENED PER
AISC 6.5.2.
3.2 SUGGEST PRE-ASSEMBLE MINI KICKER BRACKET TO RING MOUNT ON THE GROUND.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
2
1
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
C
CREATED INDIVIDUAL DRAWING
YMENG
CB1094
05JUN24 40197348CMO
D
25.5 646.9
45 1143.0 15 381.0
MONOPOLE
C B A
4
C
156.0 3962.4
2.88 73.2 ANTENNA PIPE
42.0 1066.8
96.0 2438.4 ANTENNA PIPE
2.88 73.0 HANDRAIL PIPE
B
2.88 73.0 FACE PIPE
COMMSCOPE, INC. OF NORTH CAROLINA
TOLERANCES
1 PLACE .X[.X] ± 0.2[6.3]
3 PLACE.XXX[.X] ± 0.060[1.5]
2 PLACE .XX[.X] ± 0.12[3.0]
ANGLES ± 2°
SAP MATERIAL MASTER
MP-PP13M-12C-96
FINISH
MATERIAL
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES INTERPRET PER ANSI Y 14.5M-1994
NAME
DATE TITLE
DENSITY
lbs/in³
CE YMENG RW YMENG
05JUN24 06/06/2024
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
MASS 2548.22 lbs
VOLUME 9377.99
in³
SURFACE AREA 80745.00
in²
AD CB1094
06/07/2024
1:28 MP-PP13M-12C-96 RE YMENG
06/07/2024
ECN 40197348CMO
SCALE DOCUMENT NO.
C 2024 CommScope, Inc. Confidential
HEIGHT LENGTH
WIDTH
SIZE Auth Group INSL
MODEL
DRAWING
SHEET
C
VERSION
03
STATUS
RE
REVISION VERSION STATUS
D
00
RE
REVISION
C
1 OF 10
3
2
1
4
3
2
PART NUMBERS, WEIGHTS, & EPA
TABLE 1: CONFIGURATIONS
D
INCLUDED PARTS
MC-RMHD-1245-3 MC-AS-SB02 RK-48-3MK MPPP-HK01 MT546156 HRK-13-12-01 XP-2525-12 MT54696
PART NUMBER
DESCRIPTION
WEIGHT (LBS)
(EPA)A (FT^2)*
(EPA)A 1/2″ ICE THICKNESS (FT^2)*
ANTENNA PIPES
MP-PP13M-12C-96
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
2548.22
29.99
38.05
12 1 1 1 1 3 1 2 12
- (EPA)A DOES NOT INCLUDE ANTENNA PIPES AND MOUNTING HARDWARE. IF DESIRED, ADD ANTENNA PIPE PER TABLE 2
TABLE 2: EPA OF EACH ANTENNA PIPE
ANTENNA PIPE
(EPA)A (FT^2)
(EPA)A W/ 1/2″ ICE THICKNESS (FT^2)
2-7/8″ X 96″
1.84
2.48
NOTE:
C
1. 2.
ANTENNA PIPES ARE CONSIDERED SEPARATELY. KA FACTOR OF 3-SECTOR EPA INCLUDED.
3. COMBINE THE ASSOCIATED EPA VALUES IN THE TABLES ABOVE TO DETERMINE THE EPA OF A MOUNT MODEL WITH A LISTED MOUNT PIPE CONFIGURATION.
FOR EXAMPLE, MP-PP13M-12C-96 HAS A 3-SECTOR EPA OF 29.99 FT2 WITH NO ICE PLUS 12 ANTENNA PIPES WITH A 3-SECTOR EPA OF 12X1.84=22.08 FT2 WITH NO ICE.
SO, THE TOTAL EPA OF 52.07 FT2 FOR THE MP-PP13M-12C-96
1 D
C
B
B
A 4
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:48
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
2 OF 10
3
2
1
4
3
2
FLATFORM FOR INSTALLATION
ADJUST THE INSTALLATION DISTANCE ACCORDING TO THE DIAMETER OF THE MONOPOLE WHEN INSTALL PLATFORM MC-AS-4000-00. SEE TABLE 3 DETAIL FOR THE DISTANCE ADJUSTED.
D
1 D
25.5 646.9
INSTALLATION DISTANCE
X
45 1143.0 15 381.0
MONOPOLE
C
C
DETAIL X
SCALE 1 : 8
B
TABLE 3: PLATFORM INSTALLATION POSITION
DIAMETER OF MONOPOLE (INCH)
15 17.5 20
22.5
25
27.5
30
32.5
35
A
37.5
40
42.5
45
DISTANCE (INCH) 36.89 35.62 34.34 33.07 31.79 30.52 29.24 27.97 26.70 25.42 24.15 22.87 21.60
DIAMETER OF MONOPOLE (MM) 381.0 444.5 508.0 571.5 635.0 698.5 762.0 825.5 889.0 952.5 1016.0 1079.5 1143.0
DISTANCE (MM) 937.0 904.7 872.2 840.0 807.5 775.2 742.7 710.4 678.2 645.7 613.4 580.9 548.6
NOTE: FOR MONOPOLE DIAMETERS THAT ARE NOT IN THE TABLE, USE BELOW FORMULA TO GET THE VALUE OF THE ADJUSTMENT: DISTANCE OF ADJUSTMENT = 44.54 – 0.51*D (INCH), WHERE D(INCH) IS THE DIAMETER OF MONOPOLE
4
3
B
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:23
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
3 OF 10
2
1
4
3
D
1 78
3
C
78 6 5
3.2 4
DETAIL A
SCALE 1 : 6
15
E
15
G
B COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM NO. PART NUMBER
DESCRIPTION
QTY.
1 MC-RMHD-1245-3 3 SECTOR RING MOUNT, 12″-45″ POLE
1
2 MC-AS-4000-00
WELDMENT, CO-LOCATION PLATFORM DECK
3
3 MC-AS-5000-00
WELDMENT, MONO PLATF SPINDLE
3
4 MC-AS-6100-00
WELDMENT, MINI KICKER BRACKET
3
5 RK48-00
MINI KICKER ARM SUPPORT TUBE 48″
3
6 GB-0550A
5/8″ X 5″ GALV BOLT KIT (A325)
6
7 GWF-05
5/8″ GALV FLAT WASHER, 1.7OD
33
8 GB-0524A
5/8″ X 2-1/2″ GALV HEX BOLT (A325)
27
9 MC-AS-1200-00
CLAMP PLATE, CO-LOCATION PLATFORM
6
10 9615-14
BOLT,CARRIAGE,5/8-11,8.5,STL GALV
12
11 GWL-05
5/8″ GALV LOCK WASHER
12
12 GN-05
5/8″ GALV HEX NUT
12
13 GB-05125
5/8″ X 1-1/4″ GALV BOLT KIT
3
14 GUB-4355
1/2″ X 3-5/8″ X 5″ GALV U-BOLT
12
A
15 MT546156
2.875″ O.D. X 156″ PIPE
6
16 GUB-4352
1/2″ X 3″ X 5-1/4″ GALV U-BOLT
12
17 MC-AS-6200-00
CORNER WELDMEMT, HANDRAIL
3
18 MC-AS-6400-00
WELDMENT, MINI KICKER CLIP
3
19 GB-0520A
5/8″ X 2″ GALV BOLT KIT (A325)
6
20 XP-2525
CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD
24
21 MT54696
PIPE, 2.875″OD X 96″
12
4
WEIGHT 329.19 LBS 142.23 LBS 107.22 LBS 14.77 LBS 22.96 LBS
0.52 LBS 0.06 LBS 0.31 LBS 2.97 LBS 0.82 LBS 0.03 LBS 0.08 LBS 0.20 LBS 0.71
LBS 75.58 LBS 0.71 LBS 23.91 LBS 5.97 LBS 0.26 LBS 8.37 LBS 45.96 LBS
NOTE NO.
3
2
F
2 1
1
17
16
D
B
C
21
14
3
5
AD
C
B
21
21
20
20 15
DETAIL F
SCALE 1 : 5
15
2
SOME ITEMS OMITTED FOR CLARITY
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
DETAIL G
SCALE 1 : 5
SIZE
C
C 2024 CommScope, Inc. Confidential
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SCALE
1:20
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
4 OF 10
1
4
3
2
1
D
2
D
2
10 11 12
3
C
6 9 5
DETAIL B
SCALE 1 : 6
2 13
B
12 11 10
3
9
DETAIL C
SCALE 1 : 6
A 4
3
19
6
5
18
C
DETAIL D
SCALE 1 : 6
H H
17
16 15
DETAIL E
SCALE 1 : 4
3
8
B
1
3
4 87
SOME ITEMS OMITTED FOR CLARITY
87
COMMSCOPE, INC. OF NORTH CAROLINA
5
6
TITLE
SECTION H-H
SCALE 1 : 6
SIZE
C
C 2024 CommScope, Inc. Confidential
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SCALE
1:20
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
5 OF 10
2
1
4
3
2
ANTENNA SPACING SHOWN
D
1 D
C B A
4
25.5 646.9
156.0 3962.4
15.0 381.0
36.9 937.0
C
48.0 1219.2
3
3.0 76.2
24.0 609.6
B
24.0 609.6 48.0 1219.2
48.0 1219.2
25.6 649.9
15″ MONOPOLE
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:23
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
6 OF 10
2
1
4
3
2
ANTENNA SPACING SHOWN
D
1 D
C B A
4
25.5 646.9
156.0 3962.4
25.0 635.0
31.8 807.5
C
48.0 1219.2
3
3.0 76.2
24.0 609.6
B
24.0 609.6 48.0 1219.2
48.0 1219.2
25.6 649.9
25″ MONOPOLE
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:23
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
7 OF 10
2
1
4
3
2
ANTENNA SPACING SHOWN
D
1 D
C B A
4
25.5 646.9
35.0 889.0
156.0 3962.4
26.7 678.1
C
48.0 1219.2
3
3.0 76.2
24.0 609.6
B
24.0 609.6 48.0 1219.2
48.0 1219.2
25.6 649.9
35″ MONOPOLE
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:23
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
8 OF 10
2
1
4
3
2
ANTENNA SPACING SHOWN
D
1 D
C B A
4
25.5 646.9
156.0 3962.4
21.6 548.6
45.0 1143.0
C
48.0 1219.2
3
3.0 76.2
24.0 609.6
B
24.0 609.6 48.0 1219.2
48.0 1219.2
25.6 649.9
45″ MONOPOLE
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:23
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
9 OF 10
2
1
4
3
OPTIONAL ACCESSORIES
(ALL THE ACCESSORY ITEMS TO BE PURCHASED SEPARATELY)
MP RRU SUPPORT KIT: D XP-PM-D
XP-PM-S RR-FA2 OR RR-FA4
XP-PM-D MOUNTED VIEW
2
RADIO SHOWN FOR REFERENCE
FIT UP 2.375″ O.D. TO 3.50″ O.D. PIPE
RR-FA2 OR RR-FA4
1 D
C
12.0 304.8 MIN
B
12.0 304.8 MIN
XP-PM-D
(HIDE ONE SIDE OF THE RRU FOR CLARITY)
DETAIL XP-PM-D MOUNTED VIEW SCALE 1 : 10
RADIO SHOWN FOR REFERENCE
FIT UP 2.375″ O.D. TO 3.50″ O.D. PIPE
RR-FA2 OR RR-FA4
C
XP-PM-S
B
DETAIL XP-PM-S MOUNTED VIEW SCALE 1 : 10
A 4
RADIOS ROTATED 90 DEGREES
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
MP,13′,3S,(12)2.88″X96″PIPE,W/HR
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:20
DOCUMENT NO.
MP-PP13M-12C-96
VERSION
00
DRAWING STATUS
RE
REVISION
C
SHEET
10 OF 10
3
2
1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>