QNAP TS-i410X-8G 4 Bay Wide Temperature and Fanless 10GbE Industrial NAS Owner’s Manual

: June 28, 2024
: QNAP

Table of Contents

TS-i410X-8G 4 Bay Wide Temperature and Fanless 10GbE Industrial NAS
Specifications:
Product Usage Instructions:
Initial Setup:
Data Management:
Maintenance:
- Frequently Asked Questions (FAQ):
Q: Can I use larger capacity HDDs than specified?
Q: How do I reset the NAS to factory settings?

TS-i410X-8G 4 Bay Wide Temperature and Fanless 10GbE Industrial NAS

Specifications:

Model: TS-i410X-8G
CPU: 64-bit x86
System Memory: 8 GB on board
(non-expandable)
Flash Memory: 4GB (Dual boot OS
protection)
Drive Bay: 4 x 2.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility: 2.5-inch SATA solid state
drives
10 Gigabit Ethernet Port: 2 x 10GBASE-T
(10G/5G/2.5G/1G)
USB 3.2 Gen 2 Port: Yes (10Gbps)
HDMITM Output: HDMITM 1.4b (up to 3840 x 2160
@ 30Hz)
Form Factor: Tower
LED Indicators: Power/Status, LAN, SSD
1-4
Buttons: Power, Reset
Dimensions (HxWxD): Dimensions do not include
foot pad (foot pad may be up to 30mm / 1.18 inches high depending
on model)
Weight (Net): 6.83 lbs
Storage Temperature:
Relative Humidity:
Power Supply Unit:
- 1. External Power Adapter, 90W and above, AC 100-240V
- 2. 9-36V DC input
- To avoid potential personal injury or component damage, DO NOT
  plug in two power inputs simultaneously.
Power Consumption (HDD Sleep Mode): 17.628
W
Power Consumption (Operating Mode, Typical):
25.592 W Tested with drives fully populated.
System Warning: Buzzer
Kensington Security Slot: Yes
Standard Warranty:
- Max. Number of Concurrent Connections (CIFS) – with Max.
  Memory: 3 1500

Product Usage Instructions:

Initial Setup:

Connect the power adapter to the power supply unit and plug it
into a power source.
Install compatible HDDs into the drive bays following the
compatibility list provided on the manufacturer’s website.
Connect the NAS to your network using the Ethernet port.
If needed, connect peripherals such as a monitor using the HDMI
output.
Press the power button to turn on the NAS and follow the
on-screen instructions for initial setup.

Data Management:

To store and access data on the NAS:

Access the NAS interface through a web browser using the
provided IP address.
Create shared folders for different types of data.
You can upload/download files, manage permissions, and set up
backups through the interface.

Maintenance:

To ensure optimal performance and longevity of the NAS:

Regularly check for firmware updates on the manufacturer’s
website and apply them as needed.
Clean the NAS exterior with a soft, dry cloth to prevent dust
buildup.
Monitor system temperatures and ensure proper ventilation
around the NAS.

Frequently Asked Questions (FAQ):

Q: Can I use larger capacity HDDs than specified?

A: It is recommended to use HDDs within the specified
compatibility list to ensure proper functioning and performance of
the NAS.

Q: How do I reset the NAS to factory settings?

A: You can usually find a reset button on the NAS that can be
pressed and held for a few seconds to reset the device to factory
settings. Refer to the user manual for specific instructions.

Hardware Specs

TS-i410X-8G

CPU

Intel® Atom® x6425E 4-core/4-thread processor, burst up to 3.0 GHz

CPU Architecture

64-bit x86

Graphic Processors

Intel® UHD Graphics for 10th Gen Intel® Processors

Floating Point Unit

Yes

Encryption Engine

Yes (AES-NI)

Hardware-accelerated

Yes

Transcoding

System Memory

8 GB on board (non-expandable)

Note: Reserves some RAM for use as shared graphics memory.

Maximum Memory

8 GB on board (non-expandable)

Flash Memory

4GB (Dual boot OS protection)

Drive Bay

4 x 2.5-inch SATA 6Gb/s, 3Gb/s

The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/

Drive Compatibility

2.5-inch SATA solid state drives

Hot-swappable

Yes

SSD Cache Acceleration Yes Support

10 Gigabit Ethernet Port 2 x 10GBASE-T (10G/5G/2.5G/1G)

Wake on LAN (WOL) Jumbo Frame USB 3.2 Gen 2 (10Gbps) Port HDMITM Output Form Factor

Yes Yes 4
1, HDMITM 1.4b (up to 3840 x 2160 @ 30Hz) Tower

LED Indicators

Power/Status, LAN, SSD 1-4

Buttons

Power, Reset

Dimensions (HxWxD)

2.44 × 7.09 × 9.61 inch

Dimensions do not include foot pad (foot pad may be up to 30mm / 1.18 inches high depending on model)

Weight (Net)

6.83 lbs

Weight (Gross)

6.83 lbs

Operating Temperature -40 – 70 °C (-40°F – 158°F)

Storage Temperature

-45 – 85°C (-49°F – 185°F)

Relative Humidity

5-95% RH non-condensing, wet bulb: 27°C (80.6°F)

Power Supply Unit

1. External Power Adapter, 90W and above, AC 100-240V 2. 9-36V DC input

To avoid potential personal injury or component damage, DO NOT plug in two power inputs simultaneously.

Power Consumption: HDD Sleep Mode

17.628 W

Power Consumption: Operating Mode, Typical

25.592 W Tested with drives fully populated.

System Warning

Buzzer

Kensington Security Slot Yes

Standard Warranty
Max. Number of Concurrent Connections (CIFS) – with Max. Memory

3 1500

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting. QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site. Designs and specifications are subject to change without notice.