nanit N301US Pro Smart Baby Monitor and Floor Stand User Guide
- June 5, 2024
- nanit
Table of Contents
nanit N301US Pro Smart Baby Monitor and Floor
Stand
What’s In The Box
Safety
- WARNING: Strangulation Hazard—Children have STRANGLED in cords . NEVER attempt to use cord without the protective covering . Check protective covering before each use to ensure that the cord is not exposed to your child . Immediately discontinue use if protective covering is damaged or broken .
- This device is designed to be used behind or next to a standard crib, in the middle of the long side of the crib .
- Adult assembly is required . Keep small parts away from children when assembling .
- This product cannot replace adult supervision . Ensure your child’s health by checking on him/her regularly .
- This device is designed for indoor use only .
- This product and its packaging are not toys . Do not allow children to play with them .
- Use only the AC power supply included with your Nanit .
- Never plug Nanit in to an outlet which is within reach of your child .
Let’s Get Started
- Download the Nanit app and set up your account .
- Follow the in-app instructions to set up your Nanit Camera .
- You can choose to follow the assembly instructions in-app or in this booklet .
Installation Options
- You can install your floor stand against the wall, behind the crib (A) .
- If your crib is not against the wall, you can install the third leg to place the Nanit in a more suitable position (B) .
Assembly – Wall Leaning or Free Standing
Assemble stand, top to bottom . Follow the steps starting on the next page
.
Assembly – Wall Leaning or Free Standing
- Push together the first segment (A) .
- Then screw remaining tubes together, followed by the “Y” joint (B) .
- Screw both legs to “Y” joint (C) . If using the free stand, follow the steps on the next page .
Assembly – Free Standing Only
- If adding the third leg, screw the leg to the attachment joint (D) .
- Then slide and snap attachment joint into the back of the stand (E) .
Assembly – Wall Leaning or Free Standing
Put the Nanit stand where it will live . Choose a location where the power
outlet is out of your child’s reach .
Assembly – Wall Leaning or Free Standing
- Decide cord management direction depending on where your power outlet is located (A) .
- Pull cord to reduce slack and push upwards while tightening (B) .
Assembly – Wall Leaning or Free Standing
Connect the cord management channels .
Assembly – Wall Leaning or Free Standing
- Place the Nanit at the planned center of the crib (A) .
- If using the Wall Leaning option, use U-Bracket to secure the stand 32” from the floor, via adhesive or drywall screws (B) .
Assembly – Wall Leaning or Free Standing
- Plug the power cord into the power adapter, and then plug the adapter to the outlet (A) .
- Attach the camera (B) . Make sure that the power outlet you use is not within your child’s reach .
Assembly – Wall Leaning or Free Standing
Pair camera using your Nanit app .
Assembly – Wall Leaning or Free Standing
Push the crib next to the floor stand, and adjust the camera to see the entire
crib .
Compliance
For full compliance information visit: nanit .com/legal/compliance
DECLARATION OF CONFORMITY
Hereby, UdiSense, Inc . (DBA: Nanit), 244 Fifth Avenue, Suite 2702, New York,
NY 10001, declares that the radio equipment Model N301 is in compliance with
Directive 2014/53/EU .
The full text of the EU declaration of conformity, including device frequency
bands and maximum radio-frequency power, is available at the following
internet address: https://www .nanit
.com/legal/compliance
POWER SUPPLY INFORMATION
PRODUCT USE WARNING
This product is meant for indoor use only .
RADIOFREQUENCY (RF) EXPOSURE STATEMENT
This equipment should be installed and operated with a minimum distance of 20 cm between the camera and the human body. This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>