HAVIT HV5877T-WHT Slim Oyster Light Instruction Manual
- June 5, 2024
- havit
Table of Contents
HAVIT HV5877T-WHT Slim Oyster Light Instruction
Slim Oyster Light Installation Instructions
Product Specifications
Product Specifications
Model No.| HV5877T-WHT| HV5878T-WHT| HV5879T-WHT
Name| Slim
Material| Aluminium + Polycarbonate Diffuser
Colour| White
IP Rating| IP54
Input Voltage| 240v AC
Protection Class| 2 (No Earth Required)
Lamp Base| Built in LED
Lamp Wattage| 1x 24w| 1x 30w| 1x 40w
Colour Temp| TRI Colour – 3000k, 4000k, 5500k
Lumens| 2000lm, 2100lm, 2200lm| 2600lm, 2700lm, 2800lm| 3600lm, 3700lm, 3800lm
CRI| > 80
Dimmable| Yes – Triac Dimmable
Warranty| 3 Years Replacement*
HV5877T-WHT Dimensions
HV5878T-WHT Dimensions
HV5879T-WHT Dimensions
Important Safety issues
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- Aluminium and 304SS fhttings must not be installed within Skm of any salt water environments.
- All o-rings and seals must be in place correctly to maintain warranty
- This form may be updated at any time due to product improvements, please check online installation form for most current version.
Steps for Installation
- Make sure that the electrical circuit is free of voltage (master switch off)
- Remove base plate from fitting by twisting anti cloCkwise.
- Insert cable through centre hole of fitting
- Install base plate to ceiling in desired location using appropriate screws for application.
- Connect the cable – Connect live and then neutral wire.
- Fitting is preset to 3000k, to change slide switch located in base of fitting to desired colour temperature.
- Reattach fitting to base plate making sure screws are tight to avoid water penetration.
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>