COMMSCOPE PROPEL-CABLED-MODULES Pre Terminated Propel Cabled Modules Owner’s Manual
- June 28, 2024
- CommScope
Table of Contents
COMMSCOPE PROPEL-CABLED-MODULES Pre Terminated Propel Cabled Modules
Product Information
Specification
- Product Name: Propel Cabled Modules
- Product Type: Fiber cabled module
- Brand: Propel
- Series: PPL
- Interface, Front: LC/UPC | SN/UPC
- Interface, Rear: LC/UPC | MPO | SN/UPC | Stub
- Optical Specifications: Fiber Mode – Multimode | Singlemode, Fiber Type – OM4 | OM5 | OS2
- Qualification Standards: IEC 61753-1 | TIA-568.3-D
- Safety Standard: c-UL-us
Product Usage Instructions
Installation
- Identify the appropriate module size and fiber count needed for your installation.
- Ensure End A of the pre-cabled module is connected to the desired panel or device.
- You can install the pre-cabled module from the rear of the panel for easy access.
- If required, connect End B to another Propel module, MPO connector, or stub.
Maintenance
Regularly inspect the connections for dust or debris and clean if necessary
using appropriate tools and methods.
Optical Testing
Use the serialized QR code provided with the module to access factory
optical test results for verification purposes.
FAQ
-
Q: Are Propel Cabled Modules available in all fiber counts?
- A: Yes, Propel Cabled Modules are available in all module sizes and fiber counts up to 288 fibers.
-
Q: Can End B of the pre-cabled module be connected to other types of connectors?
- A: Yes, End B can be connected to another Propel module, MPO connector, or stub as needed.
-
Q: What safety standards do Propel Cabled Modules adhere to?
- A: Propel Cabled Modules adhere to the c-UL-us safety standard.
PROPEL-CABLED-MODULES
Pre-terminated Propel Cabled Modules available in all module sizes and fiber counts up to 288 fibers
- Pre-cabled modules on End A reduces signal loss
- Pre-cabled modules can be installed from rear of panel
- Serialized QR code provides easy access to factory optical test results
Propel Cabled Modules provide a pre-terminated solution for simplified and
efficient installation. They are available in all of the Propel module sizes
on End A and End B can be another Propel module, MPO or stub.
Cable fiber counts range from 8 fibers – 288 fibers and cable lengths from 1
meter – 400 meters. Short cable lengths within rack can use patch cord cable
for easy routing within the rack and longer lengths use ruggedized trunk
cable.
Product Classification
- Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
- Portfolio SYSTIMAX®
- Product Type Fiber cabled module
- Product Brand Propel
- Product Series PPL
General Specifications
- Interface, front LC/UPC | SN/UPC
- Interface, rear LC/UPC | MPO | SN/UPC | Stub
Optical Specifications
- Fiber Mode Multimode | Singlemode
- Fiber Type OM4 | OM5 | OS2
Environmental Specifications
- Qualification Standards IEC 61753-1 | TIA-568.3-D
- Safety Standard c-UL-us
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: May 21, 2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>