SALTO IRN03… Series BLUEnet Repeater Installation Guide

June 28, 2024
SALTO

**SALTO IRN03… Series BLUEnet Repeater Installation Guide

**

Installation Instruction

    1. Installation
  1. Installation
  2. Installation
  3. Installation

Follow user manual to initialize the device.

Electrical characteristics

Electrical characteristics

Yellow : Rx Input inRoomNode (V IL, V IH)
Green : Tx Output inRoomNode (V OL, V OH)
Black : GND
Red :
VI N

ELECTRIC CHARACTERISTICS

PARAMETER| Symbol| Min.| Ty p.| Max.| Unit
Power supply| ???| 3.3| –| 12| V
T x Output High Voltage Sourcing 20mA| ?0?| 2.6| –| –| V
T x Output Low Voltage Sinking 20mA| ?0?| –| –| 0.7| V
Rx Input High Voltage| ???| 2.3| –| 5.25| V
Rx Input Low Voltage| ???| –| –| 1| V
POWER CONSUMPTION

Min.| –
Max.| 2 1 m A
SAL T O   Blue net   CH AR AC T E R I ST I C S

Frequency range| 2400-2483.5 M h z
Standard| Bluetooth Low Energy
Indoor Radio Range| 10 m/15 m
Max output power| 8 d B m

Tx/Rx does not count with under/over voltage protections.

OPERATING CONDITIONS

Temperature Indoor| 0 ÷ 50 ºC
Humidity| 0 ÷ 95% (No condensing)

Installation example

In case the device is surrounded by metal surfaces or metallic environment, radio performance could be seriously affected.

Installation example

Operational test

Once the lock and the in Room Node are installed, check that the lock is active in SALTO’s software.

BLUE net information

The environment has a direct impact on the BLU Enet range radiation (metal, concrete walls…)
The receiver device must be located facing the product antenna. Please check your product’s BLU Enet antenna position.
Recommended connectivity distance : 10 m – 15 m

Signalling

Eng LED MODE LED DEVICE STATUS
POWER LED Led Off ![Blinking GREEN](https://manuals.plus/wp-
content/uploads/2024/06/Screenshot_11-227.png) Not powered
Blinking GREEN ![Blinking GREEN](https://manuals.plus/wp-
content/uploads/2024/06/Screenshot_11-227.png) Powered from the controller

but not good U A RT link
Permanent GREEN| | Powered and UART link OK
BLUEnet LED| Led Off| | Not initialize with Lock-ID
Blinking GREEN| Blinking GREEN| Pairing process(Searching lock to pair with)
Permanent GREEN| Permanent GREEN| Wireless connection to the lock is OK

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals