COMMSCOPE BRR-FA2-A Fast Access Rru Mount Installation Guide
- June 27, 2024
- CommScope
Table of Contents
COMMSCOPE BRR-FA2-A Fast Access Rru Mount
Product Information
Specifications
- Dimensions: 16.4″ (H) x 30.0″ (L) x 8.5″ (W)
- Material: Confidential
- Weight: 50.68 lbs
- Volume: 179.49
- Surface Area: 2366.62
Product Usage Instructions
General Notes
- Metric Dimensions: All metric dimensions are in brackets [X.X].
- Patent Info: For patent information, visit here.
Design Notes
- Hazards and Obstructions: Identify any hazards or obstructions before installing the appurtenance. Additional products may be required to maintain safety climb integrity. Take precautionary measures during installation to preserve the climbing facility.
- Compatibility: The RR-FA2-A is compatible with Samsung, Nokia, and Ericsson ERS & Legacy Radios.
Manufacturing/Special Requirements
Tightening Instructions:
Tighten all bolts securing flat plates using the turn-of-nut method. U-bolts
should also be tightened using the turn-of-nut method, ensuring equal distance
and force on each leg.
Test
Perform necessary tests as per specific requirements.
Packaging
- Packaging Requirements: Packaging must meet CommScope requirements per document IS-PL-3005.
- Hardware Placement: Printed document to be placed inside a polybag and then in the shipping container. Extra hardware may be supplied, bagged, and shipped.
Frequently Asked Questions
Q: What are the dimensions of the product?
A: The product dimensions are 16.4 (H) x 30.0 (L) x 8.5 (W).
Q: Which radios are compatible with RR-FA2-A?
A: RR-FA2-A is compatible with Samsung, Nokia, and Ericsson ERS & Legacy Radios.
Q: How should U-bolts be tightened?
A: U-bolts should be tightened using the turn-of-nut method, ensuring equal distance and force on each leg.
GENERAL INFORMATION
- GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
- FOR PATENT INFO: https://www.cs-pat.com
- DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED BEFORE INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
- THE “RR-FA2-A” IS COMPATIBLE WITH SAMSUNG, NOKIE, AND ERICSSON ERS & LEGACY RADIOS.
- MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING THE TURN-OF-NUT METHOD WITH ATTENTION TO LEAVING EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
- TEST
- PACKAGING
- PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
- PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER.
- EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
DESCRIPTION
INSTALLATION
MOUNT BRACKET MTM101721-510-00 IN 860677769-001 TO RRU FIRST, THEN ATTACH TO RR-FA2
MOUNT BRACKET MTM101721-510-00 IN 860677769-001 TO RRU FIRST, THEN ATTACH TO RR-FA2
MOUNT BRACKET MTM101721-510-00 IN 860677769-001 TO RRU FIRST, THEN ATTACH TO RR-FA2
MOUNT BRACKET MTM101721-510-00 IN 860677769-001 TO RRU FIRST, THEN ATTACH TO RR-FA2
©2024 CommScope, Inc. Confidential.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>