MULLER SMSE013 RFID Reader/Writer Owner’s Manual
- June 27, 2024
- Muller
Table of Contents
Data Sheet
RFID Reader/Writer SMSE013
SMSE013 RFID Reader/Writer
Version: V2.20240306_rev.1
3059790004-02-EN-900
Read and follow this data sheet. Keep it for future use.
Subject to technical modifications.
Company details
Document| Data Sheet
Product: RFID Reader/Writer SMSE013
Document number: 3059790004-02-EN-900
Original language: German
---|---
Copyright ©| Müller-Elektronik GmbH
Franz-Kleine-Straße 18
33154 Salzkotten
Germany
Phone: ++49 (0) 5258 / 9834 – 0
Fax: ++49 (0) 5258 / 9834 – 90
Email: info@mueller-elektronik.de
Homepage: http://www.mueller-elektronik.de
For your safety
Please read the following instructions carefully before using the product for the first time:
- The approved antenna must be professionally installed by Amwac or an Amwac approved installer to comply with §15.203 of the FCC rules.
- The approved antenna must be professionally serviced by Amwac or an Amwac approved installer to comply with §15.203 of the FCC rules.
- The SIMPAS RFID Reader/Writer may only be used with the approved antenna (No.: SMSE015) and not with any other antenna (each antenna connection may only be connected to an identical approved antenna).
- Use of the device with any other antenna will invalidate the FCC certification.
- Unused antenna connectors must be deactivated by the software and covered with a dust cap.
- This device is only approved for installation on agricultural machines. The power supply from an AC source is not permitted. The system is designed to be operated only with 5 VDC. The FCC certification is invalidated if an AC main power supply is used.
Description
The RFID Reader/Writer serves as a reading and writing device for RFID tags
attached to containers of the SIMPAS application system. It is a transceiver
that operates in the 902-928 MHz range. It reads and writes RFID tags that
comply with the ISO1800-6C standard. The device is powered by 5 V and is
usually installed on agricultural machinery. It is controlled via RS-232
interface. The device transmits data and is controlled via RS-232. The
antennas have a gain of -18 dBi.
When the system is powered up and initialized, a SIMPAS Meter ECU triggers
read operations on each antenna every 100 ms via the RS-232 interface. When
the machine is running, the SIMPAS Meter ECU triggers write operations every
30 seconds to update the values on the RFID tags. Only one antenna can be
active at a time. The SIMPAS RFID Reader/Writer does not read or write
independently. An external device is required to trigger read/write operations
via RS-232.
RFID
Reader/Writer with connected antenna (No. :SMSE015)
Compliance
Changes or modifications not expressly approved by Trimble could void the
user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Technical specifications
| Operating voltage | 4.5 V…5.45 V |
|---|---|
| Max. current consumption | 0.5 A |
| Operating temperature | -20 °C…+70 °C (-4°C…+158°F) |
| Dimensions | 118 mm x 128 mm x 34 mm (4.65 in x 5.04 in x 1.34 in) |
| Certification | FCC according to FCC standard 15.247 |
| Transmitting frequency | 902 MHz (nominal) |
The transmit frequency is controlled by a 20 MHz crystal oscillator.
The RF transmitter IC (ST25RU3993) has a built-in phase locked loop circuit.
Modulation| ASK (Amplitude Shift Keying)
RF output power| 100 mW (20 dBm)
Dimensions
Block diagram
3059790004-02-EN-900
Subject to technical modifications.
Documents / Resources
|
MULLER SMSE013 RFID
Reader/Writer
[pdf] Owner's Manual
SMSE013 RFID Reader Writer, SMSE013, RFID Reader Writer, Reader Writer,
Writer, Reader
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>