Muller TEPS-50PRO Earphones wireless + Charging Box Display Instruction Manual

Muller TEPS-50PRO Earphones wireless + Charging Box Display

PARTS

Thank you for purchasing our true wireless earbuds TEPS-50PRO. Please read this instruction manual carefully before using the earbuds.

Care and Maintenance

1. Charge the earbuds at least once every 6 months.
2. Do not store the earbuds in extreme temperatures (< 0℃ or > 45℃).
3. Do not use chemicals or detergents to clean the earbuds.
4. Do not drop or knock your earbuds on hard surfaces.
5. Do not scrape the surface with sharp objects.
6. Do not try to dismantle the earbuds.

Delivery Content:

1. Two earbuds (L / R)
2. USB charging cable
3. Charging case
4. Instruction manual

Usage Instructions

Pairing the earbuds with your smartphone

Step 1. The earbuds would turn on once they are taken out from the charging case, or long press the touch panels of both earbuds to turn on the earbuds, with voice prompt of ‘Power on’.

Step 2. RED and BLUE LED would start blinking on both the earbuds. Both of the earbuds would automatically pair with each other within 5 secs.

Once they are paired with each other, one of the earbuds would show a RED and BLUE LED blinking alternatively, which means they are ready to pair with your smartphone.

Step 3. Now switch on Bluetooth in your smartphone to search for nearby devices and pair with the name ‘TEPS-50PRO’ with voice prompt ‘Connected’ after the pairing succeed. Enter ‘0000’ if prompted for password.

The earbuds would re-connect with smartphone automatically after pairing.

Notes:
The L or R earbud can be used alone to pair with your smartphone, and
thus only mono sound is available.

During Music Playback

1. Touch the L or R panel ONCE to Play / Pause the track
2. Touch the L or R panel TWICE to skip to Next track
3. Touch the L or R panel THREE TIMES to skip to Prev. track
4. Long touch the L or R panel for 3 seconds to trigger the Siri or Google Assistant.

During Calls

1. Touch the L or R panel ONCE to attend the incoming call / end the call.
2. Touch the L or R panel for 2 seconds to reject the incoming call.

Charge the Earbuds & Charging Case

1. Put the earbuds in the charging case, the earbuds power off and start charging automatically. When the earbuds are charging, the earbuds LED glows RED, and RED LED goes OFF when they are fully charged.
2. When the Case is charging, the case LED digits blinks, and LED digits goes OFF when the case is charged to 100%.

Product Parameters

Model name: TEPS-50PRO
Bluetooth version: 5.0
Bluetooth name: TEPS-50PRO (L / R / Both Earbuds)
Standby time: Approx. 20 hours
Music time: 4 hours
Earbuds battery capacity: 3.7V 40 mAh x L / R
Charging case battery capacity: 3.7V 300 mAh

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste materials (discarded electric and electronic equipment and batteries) are not handled correctly.

Electric and electronic equipment and batteries are marked with the crossed out trash can symbol, as below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department
of your city.

Warning: Lithium battery inside

Hereby, JD Sales GmbH & Co. KG declares that the radio equipment type
OUTMARK TEPS-50PRO is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
Please enter:https://www.outmark.de/download/.
Operating Frequency Range: 2412 MHz – 2472 MHz
Max Output Power: 8 dbm

JD Sales GmbH & Co. KG
Winkel 12
24226 Heikendorf
Germany
service@outmark.de
+49 (0) 431 5808 19-20
www.outmark.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>