Muller TEPS-40 Earphone Wireless with Charging Box User Manual
- June 6, 2024
- Muller
Table of Contents
- Important Safety Instructions
- Product Specification
- Packing List
- Product Overview
- Power ON/OFF
- Pairing Stereo Mode
- Mono Mode
- Talking Mode
- Charging the Earbuds
- Charging the Charging box
- Trouble Shooting
- Disposal Information
- Declaration of Conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EARPHONE WIRELESS + CHARGING BOX
TEPS-40
USER MANUAL
www.outmark.de
Important Safety Instructions
To avoid damaging your hearing:
DANGER
→ Limit the amount of time the earphones are used at high volume levels and
set the volume to a safe level to avoid hearing loss. The higher the volume,
the shorter the safe listening time.
Please note the following information
→ Listen to music for a reasonable period of time at an appropriate volume.
→ Make sure not to keep increasing the volume as your hearing adapts.
→ Do not turn up the volume so much that you cannot hear what is going on
going around you.
→ Be careful in potentially dangerous situations or switch off the Headphones
off temporarily.
→ Excessive sound pressure from earphones and headphones can lead to hearing
loss!
→ The use of earphones in both ears while driving will not work recommended
and may not be allowed in most areas.
→ For your safety, avoid the distraction of music or phone calls in traffic or
in other potentially dangerous places.
To avoid damage or malfunction:
ATTENTION
→ Lithium battery (ies) included!
→ Do not try to open the housing of the product!
→ Do not expose the headphones to excessive heat!
→ Do not drop your headphones!
→ The headphones must not be exposed to drops or splashes!
→ Do not immerse your headphones in the water!
→ Do not use cleaning agents that contain alcohol, ammonia, benzene or
Abrasives included!
→ If cleaning is required, use to clean the product a soft cloth that, if
necessary, with a minimum of water or diluted mild soap is moistened.
→ The integrated battery must not be exposed to excessive heat such as sun,
fire or like that are exposed!
→ Charge the earphones at least once every 6 months!
→ Do not store the earphones at extreme temperatures (below 0 ° C or above 45
° C)!
Product Specification
Model name | TEPS-40 |
---|---|
Bluetooth version | V5.0 |
Bluetooth name | TEPS-40 (L & R ear-bud) |
Standby time | Approx. 30 hours |
Talking/ Playback Time | Approx. 3 hours |
Battery capacity earbuds | 2 x 40mAh |
Battery capacity box | 400mAh |
Battery temperature | 0°C – 40°C (32°F – 113°F) |
Operating Frequency Range | 2412-2472 MHz |
Max Output Power | 8 dBm |
Packing List
2 x earbud
1 x charging box
1 x USB-cable
1 x user manual
Product Overview
- Dust-proof mesh
- Multi-function button
- MIC
- LED indicator
- Charging port
Power ON/OFF
- To power on, press and hold the multi-function button until the red and blue LED flashes alternately.
- To power off, press and hold the multi-function button until the LED turns red. Or the earbuds are turned off automatically if the earbuds are disconnected from your Bluetooth device for over five minutes.
Pairing Stereo Mode
Connect the two paired earbuds to your smartphone to create stereo sound.
- Press and hold the multi-function buttons of both earbuds at the same time until the LEDs flash red and blue alternately.
- Wait 3 seconds to let the earbuds automatically pair with each other.
- On your smartphone, enable Bluetooth, search and select “TEPS-40” to pair. After the earbuds are successfully paired with your smartphone, the blue LED flashes slowly. The earbuds are re-connected automatically to your smartphone after successfully paired.
Mono Mode
Connect either of the earbuds to your smartphone.
Only mono sound is available.
- Press and hold the multi-function button of the earbud you want to pair until the LED flashes red and blue alternatively.
- On your smartphone, enable Bluetooth, search and select “TEPS-40” to pair.
Note: In mono mode, to change an earbud to be paired with your smartphone, turn off the earbud which is paired with the smartphone, and press and hold the multi-function button of the earbud you want to pair with the smartphone.
Talking Mode
To control phone calls, make sure the earbuds are connected to your
smartphone.
When there’s an incoming call, the calling numbers are voice broadcast. To
answer the call, press the multi-function button once; to reject the call,
long-press the multi-function button.
To redial the last phone number during music play, press the multi-function
button twice.
Charging the Earbuds
During charging, the red LED turns on. After fully charged, the LED turns off.
Note: When charging, the earbuds are forcibly turned off.
Charging the Charging box
During charging, the red LED ashes. After fully charged, the red LED turns to a solid light.
Trouble Shooting
Follow below steps can resolve any pairing or reconnecting issues:
- In some cases, you might need to re-pair the earbuds with your smartphone when you turn off Bluetooth on your smartphone or turn off the earbuds. To re-pair, follow the steps described in the user manual.
- Make sure the battery dock has enough power ;
- Put the earbuds into the dock and recharge for a while.
Disposal Information
Electrical and electronic devices and batteries contain materials components
and substances that could be harmful to you and your environment, provided
that the waste materials (disposed of electrical and electronic Old devices
and batteries) are not handled correctly.
Electrical and electronic equipment and batteries are included with the marked
crossed-out waste-bin symbol, as shown below.
This symbol means that waste electrical and electronic equipment, as well as
Batteries, must not be disposed of with household waste, but separately are
disposed of.
As end consumer, it is necessary that you keep your batteries run down and
hand them in at the appropriate collection points. That way you pose to make
sure that the batteries are recycled according to the legislation and do not
cause environmental damage.
All cities and municipalities have set up collection points where old
electrical and electronic devices and batteries can be handed in to be
recycled free of charge or can be collected from households.
Contact your local environmental authority for more information.
Declaration of Conformity
JD Sales GmbH & Co. KG hereby declares that the radio system type TEPS-40
complies with Directive 2014/53 / EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.outmark.de – Download area.
Legal Information
JD Sales GmbH & Co. KG
Winkel 12
24226 Heikendorf
Germany| +49 431 580819-20
service@outmark.de
www.outmark.de|
---|---|---
All products can be tacitly changed. Errors and omissions in the operating
instructions reserved.
ALL RIGHTS RESERVED, COPYRIGHT
JD SALES GMBH & CO. KG
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>