TECKNET HWD01881WS02 Wireless Doorbell User Manual
- June 16, 2024
- TECKNET
Table of Contents
TECKNET HWD01881WS02 Wireless Doorbell
Package Contents
Product Layout
Product Specification
Receiver
- Receiver working voltage ：
- AC100V-240V 50Hz/60Hz
- working power：
- 1W
Transmitter
-
Battery：
- DC 3V (CR2032 x1)
-
Working Current：
- 30mA
-
Transmission Power:
- 10dBm
Transmitter installation
- Remove the battery isolation strip on the back of the transmitter before use.
- Use the enclosed 3M double-sided tape to stick the transmitter to the wall or door.
Instructions
- “ ” Press the music button once to play the next chime and select the one you like. Press twice to go back to the previous chime.
- “ ” Press the button each time to adjust the 5 volume levels.(Mute/Low/Medium/High/Max)
- Pairing Method
- Choose your favourite melody.
- Long press the music button “ ” (at least 3 seconds) on the receiver until a ‘dingdong’ tone is heard.
- Press the transmitter button once, the receiver will play the chosen melody.
- Press and hold the volume button “ ” for at least 5 seconds until a ‘dingdong, dingdong’ tone is heard. (This will clear the pairing)
- There is a ‘dingdong’ tone when the receiver is plugged in for the first time. This indicates the power is on.
- Indicator light：the light will flash while the chime is playing on the receiver. The transmitter indicator light will be lit up when press the bellpush.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment ) This Marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
IMPORTANT SAFETY INSTRUCTIONS FOLLOW THESE INSTRUCTIONS
- SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion may occur.
- For proper insertion, please observe polarity indicators ( +/-).
- Remove the batteries if the product is not going to be used for a long period.
- Do not place product in or near inflammable, explosive or hazardous objects.
- The doorbell is waterproof to some extent, but it still needs some protection so that it will operate correctly, so please do not place in or near water, rain, excess moisture or extreme heat.
- Do not operate the product with a damaged cord or plug.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
- To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.
Limited 12-Month warranty
What does this warranty covers?
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to
the original purchaser of this TeckNet product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TeckNet product for 12 Months.
What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free of
charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TeckNet product is not provided
to Unichain for inspection upon Unichain’s request at the sole expense of the
purchaser, or if Unichain determines that the TeckNet product has been
improperly installed, altered in any way, or tampered with. The TeckNet
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit the TECKNET website or email
support.us@tecknet.com for more information.
To extend the warranty period, please visit the TECKNET website and register
your TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>