CREATE Eelctric Popcorn Maker Machine User Manual

: June 5, 2024
: CREATE

Table of Contents

SECURITY INSTRUCTIONS
PARTS LIST
OPERATING INSTRUCTIONS
CLEANING AND STORAGE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

POPCORN MAKER PALOMITERO
USER MANUAL

Thank you for choosing our popcorn maker. Before using the appliance, and to ensure the best use, carefully read these instructions. The safety precautions enclosed herein reduce the risk of death, injury, and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt, and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using electrical appliances. We assume no liability for customers failing to comply with these requirements.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

Read all Instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against electric shock do not immerse cords, plugs in water, or others.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow cooling before putting on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions. Return appliance to the nearest authorized service facility for examination, repair, or adjustment
The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
Do not use outdoors
Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Always attach the plug to the appliance first, then plug the cord in the wall outlet. To disconnect, turn any control to “off; then remove the plug from the wall outlet.
Do not use the appliance for other than intended use.
A popcorn maker that is plugged into an outlet should not be left unattended.
Extreme caution must be used when unloading popcorn. Always turn the unit over a countertop so that residual hot oil or water running out will not cause burns.
A short power-supply cord is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
If a Long detachable power-supply cord or extension cord is used:
The marked electrical rating of the cord or extension cord should be at least as great as the electrical rating of the appliance.
If the appliance is of the grounded type, the extension cord should be a grounding 3-wire cord.
All requested breaks must be followed.
Please refer to the rating label for the maximum continuous usage time (KB 5 min is the maximum usage time).
The breaks should last at least 10 minutes.
This appliances are not intended to be operated by means of an external timer or separate remote-control system.
For safety reasons, a damaged or defective supply cord should only be replaced by the service center.
This appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

PARTS LIST

Top cover
Corn outlet
Body
Switch

OPERATING INSTRUCTIONS

Place the popcorn maker on a level surface.
Before first use, it is recommended to wipe the popcorn maker and accessories with a damp cloth.
Measure the corn using the top cover as a measuring cup. One full measure per session is enough. More than one full measure could overfill the popcorn maker and disturb the proper functioning of the machine.
Preheating of the appliance is not necessary.
Do not add any other ingredients during popping such as oil, shortening, butter, margarine, salt, or sugar, as damage will occur.
Pour the popcorn into the aluminum heat chamber through the corn inlet.
Replace the top cover before starting making popcorn.
Place a large bowl under the spout so that the edge of the bowl is touching the body of the popcorn maker. It is important that the popcorn ejects down the spout into a bowl and it is not re-directed, blocked, or otherwise interfered with, since the popcorn is hot and premature contact may cause minor discomfort.
Switch on the popcorn maker. After a few moments, the continuous popping action will automatically feed popcorn from the aluminum heat chamber out through the spout until all have popped. This process will last about 3 minutes.
Turn off the popcorn maker and remove the main plug from the main supply when popping has stopped.
If more popcorn is required, remove the popcorn remaining in the aluminum heat chamber. Pay attention not to get burnt when handling the top cover as this part is very hot when the popcorn maker Is functioning.

NOTE : Wait for approx. 10 to 12 minutes before using the popcorn maker again.
WARNING: Do not add oil. Please use dry corns for popping. Place the top cover in its position. Never put butter into the aluminum heat chamber.

CLEANING AND STORAGE

Before cleaning, remove the mains plug from the mains supply.
Make sure the popcorn maker has cooled down completely before cleaning.
Clean the plastic parts of the popcorn maker with a damp cloth. Never use abrasive products as they could damage the popcorn maker.
The top cover can be cleaned in warm soapy water.
When the popcorn maker is not in use, disconnect and store it in a safe, dry place, out of reach of children.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electrical and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated, and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves the application of administrative sanctions according to the laws.

CREATE