LUCIDE 5xE27 ORLANDO Hanglamp 5xE27 Instruction Manual

June 13, 2024
LUCIDE

LUCIDE-logo

LUCIDE 5xE27 ORLANDO Hanglamp 5xE27

LUCIDE-5xE27-ORLANDO-Hanglamp-5xE27- product

Product Information

  • Brand: Lucide
  • Model: Orlando
  • Dimensions: LxWxH – 112cm x 10cm x 172cm
  • Weight: 4.80kg
  • Main Material: Glass
  • Color: Smoke Grey and Black
  • Style: Modern
  • Shape: Rectangle
  • Dimmable: Yes
  • Light Direction : Around (Diffuse)
  • Adjustable in Height: Yes (Before Installation)
  • Directional: Not Directional
  • Cable: Yes, Cable on Product
  • Cable Length: 130cm
  • Sensor: Without Sensor
  • Control: Light Switch Control
  • Power Supply: Adapter/Power Grid
  • IP-Class: 20 – Electric Class: 2
  • Number of Light Sources: 5
  • Lamp Socket: E27
  • Maximum Wattage: 40W
  • Power Requirements: 220-240V~50Hz
  • Warranty: 2 Years

Product Usage Instructions

  • Safety Precaution
    • This product is only suitable for indoor use, excluding the bathroom (unless a higher IP degree permits bathroom usage).
    • Please follow local regulations for the collection and recycling of electrical and electronic equipment.
    • For products labeled with the symbol for separate collection, return them to a municipal waste collection point for recycling.
    • Class I: The product is grounded. The grounding wire (green-yellow) must be connected to the mass connection (marked with the symbol).
    • Class III: The product is only suitable for lower voltage power supply and should not be connected to the grounding wire.
    • IP 20: Protection against touch with a finger. – If the protective glass is damaged or broken, it must be immediately replaced
    • Maintain the minimum distance between the lamp and flammable objects.
  • Installation
    • Refer to the installation drawing specifications for detailed instructions.
    • Ensure that the product is installed according to the provided dimensions and technical drawings.
    • Follow the recommended height range for installation (minimum: 120cm, maximum: 172cm).
    • Connect the cable on the product to the power supply using the provided cable length of 130cm.
    • Use the light switch control to turn on/off the lights.
  • Maintenance
    • Regularly clean the product using a soft, dry cloth.
    • Avoid using abrasive or harsh cleaning agents that may damage the surface.
    • If any technical issues arise during the warranty period, refer to the warranty terms for further assistance.

For more detailed specifications or dimensions of this product, please visit the Lucide website at www.lucide.com.

INSTALLATION MANUAL
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality and affordable lighting.
Welcome to the community of #illuminatesyourworld

LUCIDE-5xE27-ORLANDO-Hanglamp-5xE27- \(1\)

  • Visit our website and discover our entire collection
  • Our brand video gives you a glimpse behind the scenes at Lucide
  • Take a look at how others around the world use Lucide products

Overview

LUCIDE-5xE27-ORLANDO-Hanglamp-5xE27- \(1\)

General

  • Dimensions LxWxH: 112cm x 10cm x 172cm
  • Height minimum: 120cm
  • Height maximum: 172cm
  • Main material: Glass
  • Color: Smoke Grey and Black
  • Style: Modern
  • Shape: Rectangle
  • Weight: 4,80kg

Specifications

  • Dimmable: Yes
  • Light direction: Around (Diffuse)
  • Adjustable in height : Adjustable In Height (Before Installation)
  • Directional: Not Directional
  • Cable: Yes, Cable On Product
  • Cable length: 130cm
  • Sensor: Without Sensor
  • Control: Light Switch Control
  • Power supply: Adapter/Power Grid
  • IP-Class: 20
  • Electric Class : 2
  • Number of light sources: 5
  • Lamp socket: E27
  • Maximum wattage: 40W
  • Power requirements: 220-240V~50Hz
  • Warranty: 2 Years

Dimension

LUCIDE-5xE27-ORLANDO-Hanglamp-5xE27- \(2\)

Assembly

LUCIDE-5xE27-ORLANDO-Hanglamp-5xE27- \(3\)

Safety Instructions

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

  • This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
  • Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
  • Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
  • Class II: The item is double insulated and must not be connected to the earth wire.
  • Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
  • IP 20: Protection against contact with a finger
  • If the protection glass is damaged or broken, it needs to be replaced immediately.
  • Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.
Exclusions for the warranty:

  1. Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
  2. Normal wear and tear, discoloring as a result from normal use.
  3. Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product. For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.

Further explanations can be found on our website.
www.lucide.com

LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals