Feelworld 3D 7 inch Ultra Bright Touch Screen Monitor User Manual
- June 27, 2024
- FEELWORLD
Table of Contents
Feelworld 3D 7 inch Ultra Bright Touch Screen Monitor
Product Overview
Thank you for using our 7 inch ultra bright touch screen monitor. This monitor has HDMI input and output, auxiliary power output, touch screen menu operation, HDR monitoring and support user 3D LUT upload and other features. Advanced features include Parade, Vector, Histogram, Audio Meter, Focus Assist, False Color, Zebra Exposure, Pixel to Pixel, Center Marker, Safety Marker, Marker Mat, Monochrome, Image Freeze, Zoom, Ana morphicetc. It is an ideal, portable and lightweight viewfinder and video monitor. The monitor is equipped with dual battery plates; you can use the power adapter supply or use the external battery for power supply.
To insure the best
use of the unit, please read the user’s manual carefully
CAUTION
- Please avoid the heavy impact and drop onto the ground when move the product.
- The screen of this product is made of glass. Keep away from injury if the screen is broken.
- Keep the product away from the heat source, and avoid prolonged exposures to the sun as the LCD screen will be damaged.
- Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintain brightness of the surface.
- No adjustable components are in the monitor. Please don’t take part or repair the unit by yourself, to avoid the damage of the product.
Features
- Touch screen menu operation
- Support HDR monitoring
- Support 3D LUT Log to REC.709 and user 3D LUT upload
- 1920×1200 full HD IPS screen
- 2200nits Daylight Viewable (Light Sensor)
- All Waves display, Parade, Vector, RGB Histogram functions
- Histogram is a quantitative tool to inspect the image brightness, to guide the exposure control
- Focus Assist (red, green, blue, white, yellow five peaking colors optional)
- Audio Meter
- Zebra and False Color function, convenient to guide the using light when shooting and the post production
- Monochrome (gray, red, green, blue)
- Image Zoom-in function
- Anamorphic Mode
- Image Flip H and Flip V
- Image Freeze
- Pixel to Pixel
- Marker Mat, Center Marker and Safety Marker
- Brightness, Contrast, Sharpness, Hue, Saturation and Color Temp Adjustment.
- Stereo Earphone output
- DC 8.4V power out to power your DSLR camera or mirrorless camera
Product Description
Button Instruction
- Indicator Light: After connecting the power, the indicator light is on (red). Long Press button to turn on the monitor, it turns yellow. After the signal is connected, it turns green.
- MENU: See details: 3.1 MENU Wheel Menu Operation In3. Menu Operation Instruction.
- Light Sensor: The backlight mode under the icon is set to Auto, and the brightness of the backlight can be adjusted automatically by the light sensor.
- F1 ~ F3: Custom function buttons
Port Instruction
- Dual F970 Battery Plates
- Power / Touch Function Button Long press to turn on / off; short press to turn on / off the screen touch function.
- 5mm Headphone Jack
- HDMI IN
- HDMI OUT
- DC 12V Power Input
- DC OUT 8.4V Power Output Connect the optional dummy battery cable to power camera.
- SD Card Slot 3D LUT upload via SD card and/or firmware upgrade
Power Supply Way
-
The rear cover of the monitor is equipped with dual F970 Battery Plate, which is applicable to F970 series of batteries.
Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 530 series
Remark: It is recommended to use standard original F970 Batteries. Different specifications of the battery have different capability. The working time for the monitor will be different. Higher capability (working time) will be longer. Please Take Off the battery from the monitor if you don’t use the monitor in along time.- Battery switching instruction
- When the battery/batteries is/are placed in the battery slot(s), battery icon will appear on the upper right of the screen.
- White battery icon: working; Gray battery icon: not working.
- Manually switching: Double-tap the gray battery icon audit will be switched to a working state in about 3 seconds, then it will be turned white.
- Automatically switching: Automatically switch to another charged battery when one battery is exhausted.
-
DC IN 12V : DC power input, polarity as the input power , Barrel (5.5mm outer, 2.1mm inner) at the bottom of themonitor, DC 7~24V Input.
-
) DC OUT 8.4V: DC power output interface, polarity as the output power Barrel output for powering your camera with a separately available DC coupler via adaptor (NP-FW50 Sony &LP-E6 Canon DMW-BLF19 Panasonic). More adapters comingsoon.
Mount Points
There are (3) ¼-20 thread points (bottom, right & left) can be easily connected to the hot shoe mount, tripod fixed installation.
Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Armviashoe mount or 1/4″-20 thread. The Tilt Arm enables 360°of tilt for convenient monitoring at nearly any angle. A cold shoe on Tilt Arm lets you secure equipment (like a microphone, LEDlight, or wireless receiver) that would otherwise be displaced from the camera accessory shoe.
Menu Operation Instruction
After the monitor is properly connected to the power supply, the indicator
light is on (red). Long press button to turn the monitor, the indicator light
turns yellow. After the signal isconnected, the indicator light turns green.
After startup, short press to select to turn the screen touch function on or
off.
Touch Screen Menu Operation (turn on the screen touch function)
-
Double-click on the screen to open the main menu (show the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option to select or set with the “<” or “>” key of the option. Exit the menu and press key of the main menu or click the touch screen.
-
When the menu is not displayed, swipe up from the bottom of
the screen to open the shortcut menu, and click on the corresponding menu box to open or set the corresponding function. -
When the menu is not displayed, on the left side of the screen(1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of the screen (1/2 split
screen), you can directly adjust the volume
Figure
MENU Wheel Menu Operation
- When the menu is not displayed, directly rotate the wheel to backlight or volume adjustment. The wheel option can be set to backlight or volume in the menu .
- Long press the MENU wheel to open the main menu (on the left side of the screen). Rotate the wheel to select the secondary function menu. After selecting it, press the wheel, then rotate the wheel to select or set the option function
- Short press the MENU wheel to open the shortcut menu(below the screen), rotate the wheel to select the shortcut menu option, press the wheel to directly turn on/off the function, if you press the parameter selection, repeat the above operation. The shortcut menu will automatically exit after about 5 seconds without operation.
Menu Function Instruction
**All Waves**
| OFF, ON
After turning on, waveform, vector, histogram and embedded audio will be shown.
---|---
**Parade**
| OFF, RGB, YUV, Y
This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The parade feature also checks the evenness of the lighting when lighting a chromakey or background.
**Vector**
| OFF, ON
Shows how saturated the image is and where the pixels in the image land on the color spectrum.
**Y Histogram**
| OFF, ON
A quantitative tool to check the picture brightness, display different color for different brightness
RGB Histogram
| OFF, ON
| It can display the graphic of color tone distribution, c an intrusively
display the expos ure status of the image, and display over lapping histograms
in red, green, and blue channels
---|---
Focus Assist
| OFF , ON
The focus level and focus color items are displayed after the focus assist i s turned on. It highlights the areas that are in focus so you are able to quickly focus the· camera and not miss crucial shots.
Focus Level
| 1~ 10
Focus Color
| yellow, red, green, blue, white
Audio M eterc
| OFF , ON
Display an audio diagram after enabled to help you understand the audio status being used
Zebra
| OFF , ON
The zebra value item is displayed only after the zebra is turned on
Areas of the image over a certain threshold are filled w h a striped pattern
to dramatically highlight areas where too much light is falling on the image
sensor.
Z e bra Value
| 1%~ 100%
M ono c hrome
| OFF , gray , red , g re e n , blue
When enabled, hu e and saturation adjusted quickly and accurately
False Color
| OFF , type 1 , type 2
An image that depicts an object in colors that differ from those a photograph (a true color image) would show.
Return
| Back to the previous OSD menu
**Nine Grid**
| OFF, ON
The area of the picture is divided into nine equal grids
---|---
**Safety Marker**
| OFF, 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1:1, 1.91:1.1, 4:5, 9:16, 1.85:1, 2.35:1
Center Marker
| OFF, ON
**Marker Mat**
| OFF, 16:9, 16:10, 4:3, 1.85:1, 2.35:1, 2.41:1, 1.9:1, 5:4, 1:1.9
The Marker Mat Alpha item is displayed after the Marker Mat is turned on.
Marker Mat Alpha
| 0%, 25%, 50%, 75%
Marker Color
| yellow, red, green, blue, white, black
Return
| Back to the previous OSD menu
Scan Mode
| Under Scan, Over Scan
---|---
**Video Aspect**
| auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Stretch, user Under the user , you can customize the Video Width (100% ~ 200%), Video Height (100% ~ 200%)
Anamorphic Mode
| OFF, 1.25x, 1.33x, 1.5x, 1.6x, 1.8x, 2.0x, 2.0x mag Allows you to use anamorphic lenses or adapters and see the image unqueened, even if your camera does not de-squeeze in camera.
Flip H
| OFF, ON
Flip V
| OFF, ON
Zoom Times
| OFF, 100 % 300 %
It is HD signal in any part, an amplification for high quality close-up.
---|---
Freeze
| OFF, ON
Pixel to Pixel
…
| OFF , ON
Enable the filmmaker to check the image from the 1:1 signal source without scaling. This feature is essential for capturing optimum detail.
Return
| Back to the previous OSD menu
HDR| OFF, HLG 2020 , HLG 709 , HLG P3
HOR can provide more dynamic range and the details of image, it is better to reflect the visual effects in the real environment.
---|---
Lut Switch| OFF , ON
The Lute item is displayed after the Lut Switch is turned on. LUT is a table for quickly looking up and output specific color data. By loading different 3D-LUT tables, it can quickly recombine color tone to form different color styles
Lut| SLOG2, SLOG3, LOGC, VLOG
Lut Import ( SD)| After copying the 3D LUT file to the SD
card and inserting it into the SD card slot, you can click the “<” or “>” key
in the Lute (SD) option, or rotate the wheel to import the 3D LUT file.
Note : the chip should be faced up when inserting the SD card, and
press it after inserting to ensure that the SD
| card is fully inserted.
---|---
Colortmap
| 5600K, 6500K, 9 300K , user
Under tha “user’ “item, the red. green. and blue values of the imago can be
adjusted, made the cookers of the Image achieve your favorite
Backlight
| 1~ 100
Adjust the screen brightness
Brightness
| 0~ 100
Adjust the image brightness
Conbtrast
| 0~ 100
Adjustment of the ratio between the brightest and darkest pans of the image. When adjusting. pay attention to the sense of hierarchy in the image. If the proportion is too large or too small. it can cause the image to lose its colorful appearance.
Saturation
| 0~ 100
Adjustment of color concentration
Hue
| 0~ 100
It is the most accurate standard for distinguishing various different color. Determine what a certain color is actually color via the color appearance
Sharpness
…
| 0~ 100
An index that reflects the clarity of image planes and the sharpness of image odes
Return
| Back to tha previous OS0 menu
Wheel
| Backlight , Volume
After selecting the wheel opinion. you can click the “<..or> butt on in to whee option. or rotate the wheel to select one of the shortcut keys to sot it to the rotary wheel adjustment (when the menu is not displayed).
---|---
Language
| English. ‘ :t. • • • • LI4’M:. Deutsch. Française. Italian, Espanola , !”• ,PycKNNA-
Transparency
| OFF. low. middle, high
Adjust the transpa.ro-nay o f the menu picture background on the screen
OSD Time
| Ss.1Os, 1 5s, 20s, 25s, always
Select the display time of the menu on the screen
Auto Mirror
| OFF, ON
After turning on. tile Image will autumnally adjust upside down.
Volume
| 0- 100
Adjusting the speaker volume
Reset
| After selecting the re-set option, you can click the•<” or >.. key in the reset option or rotate the wheel to restore the factory settings.
Firmware Update
…
| After copying the update file to tha SD card and inserting It into the SO
card slot. youkan click the •<” or >..key in the firm ware update option or
rotate the wheel to update.
Note : the chip should be faced up when inserting the SD card. and press
it after inserting to en sure that the SO card is fully monody.
Return
| Back to the previous OSD menu
| **** Exit the menu
---|---
How to Load LUT
SD card format
Support FAT32 or NTFS. For MAC system, the SD card should be formatted in MS- DOS (FAT)
Max Files Limit Maximum 50 Lut files
File requirements
- The LUT file format suffix should be .cube
- Single file not exceeded to 7.9Mb
- Support LUT-3D-Size 16,17,32,33,64,65
Remark: LUT file name must be English or Arabic numerals
Steps for loading
Make sure the SD card correctly insert
Enter main menu –LutImport(SD)–click “ <” to load the monitor will auto detect the SD card
A. There is no SD Card, the screen will show failed, can try once more, if not work, restart the monitor and try again
B. There is SD Card, the monitor will erase the exits user’s lut fill and show “Initializing” , If there is no valid lut file in SD card, the lut will not load. Them on it or will show “clean up”
C. If there is valid lut file in SD card, the monitor will load lut files and show“[n] name. The [n] shows the quantity number. The “name” should in lut files’ name. If load successful, the screen will show “complete[n]”. [n] Stands for the quantity number for lut files should under 50.
Support Formats
| HDMI Input/ Output Support Format | 480i/480p/576i/576p |
|---|
720p (60/59.94/50/30/29.97/25/24/23.98)
1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/23.98)
3840x2160p (30/29.97/25/24/23.98)
4096×2160p (24Hz)
Technical Parameters
Panel Size
| 7” touch screen
---|---
Resolution
| 1920 × 1200 pixels
Dot Pitch
| 0.07875 (H) x 0.07875 (W) (mm)
Aspect Ratio
| 16:10
Brightness
| 2200cd/m2 (Light Sensor)
Contrast
| 1200:1
Viewing Angle
| 80°/80°(L/R) 80°/80°(U/D)
Backlight
| LED
Input
| HDMI
Output
| HDMI, DC OUT 8.4V
Audio
| 3.5mm Stereo Headphone
Power Input Voltage
| 7～24V
Power Consumption
| ≦16W
Unit Size
| 190Lx126Hx27D (mm)
Unit Weight
| 460g
Mount Points
| (3) ¼-20 thread points (left, right, bottom)
Working Temperature
| -20℃～50℃
---|---
Storage Temperature
| -30℃～60℃
Trouble Shooting
Only black and white or monochrome picture:
- please check saturation, brightness & contrast adjustment.
- Please check “Monochrome” is in black, white or monochrome image or other condition.
NO Image after put on the power
- Check if signal cable connecting is in good condition.
- Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.
Earphone No sound
- Check if Volume control do not open, press the volume button, and try to increase the volume.
- If there are still other problems, please contact with our related technologists.
- As we are improving product features and product performance, so if there is any change on the specification without prior notice