Aukey TC10 Magnetic Power Bank User Manual
- June 26, 2024
- Aukey
Table of Contents
Aukey TC10 Magnetic Power Bank
Product Information
Specifications
- Model: Magnetic Power Bank TC10
- Capacity: 10000mAh
- Output: 3.85V, 38.5Wh
- Compliance: FCC Part 15
Product Usage Instructions
Charging the Power Bank
- Connect the included charging cable to the power bank’s input port.
- Connect the other end of the cable to a power source such as a wall adapter or a computer.
- The LED indicators on the power bank will show the charging status. Wait until fully charged before use.
Charging Devices
- Connect your device to the power bank using a compatible charging cable.
- Press the power button on the power bank to initiate charging.
- Monitor the LED indicators to track the remaining power level of the power bank.
Safety Precautions
- Avoid exposing the power bank to extreme temperatures or moisture.
- Do not dismantle or attempt to repair the power bank yourself.
- Keep the power bank away from children and pets.
FAQ
- Q: How long does it take to fully charge the power bank?
- A: The charging time may vary, but it typically takes around 4-6 hours to fully charge the power bank.
- Q: Can I charge multiple devices simultaneously with this power bank?
- A: Yes, you can charge multiple devices as long as the total output does not exceed the maximum capacity of the power bank.
Please read this user manual carefully before use and keep it for future reference.
Product parameters
- Name: Magnetic Power Bank
- Cell: Polymer Battery
- Battery Capacity: 10000mAh/3. 85V38. 5Wh
- Type-C Output 9V 2A / 12V 1.67A
- Type-C Input 9V 2A / 12V 1.67A
- Product Size: 11769.519.5MM
- Model: TC10
- Product Weight: 245g
- Total Output: 9V 2A
- Energy Conversion Rate: ≥75%
- Wireless charging conversion rate: ≥45%
Package Including
- Power bank×1
- User Manual × 1
- Warranty Card × 1
- Charging Cablex 1
Product Description
- This product is a portable magnetic wireless mobile power supply with dual Type-C input, which can charge four devices simultaneously, The product has features such as battery-level digital display, type-C bidirectional, mini portability, built-in overcurrent, overvoltage, and overheating. short circuit
- Multiple safety protection circuits such as protection
User Environment
- Use environment temperature: nontropical area below 0 ° C to 40 ° C
- Storage environment temperature: 0 ° to 40 ° C
User Instructions
- Charging operation instructions
- Tc10 digital display mobile power supply for charging mobile phones or other digital devices
- Check if the charging voltage of the digital product matches the output voltage of the TC10 digital display mobile power supply
- Check the original charging cable of the digital product, and connect one end to the digital product and the other end to the TC10 digital display for movement, The output port of the power supply is connected, and the TC10 digital display mobile power supply will automatically start charging the digital product, indicating the battery level The light is always on
- When using the wireless charging function, click the button to display the lightning symbol, which will light up for wireless charging of the phone or watch Start working
Charge the TC10 digital display mobile power supply using a power adapter
- Select the original USB cable and connect the Type-C interface to the Type-C interface of the TC10 digital display mobile power supply
- Connect the USB charging cable to the charger, and the LED battery indicator light will start flashing, indicating Charging the TC10 digital display mobile power supply, the LED light remains on when fully charged
Safety Warning Instructions
Please read all instructions and warnings before using this product. Improper
use may cause damage to the product or personal safety.
- Mobile power sources have conversion efficiency, so the battery capacity of mobile power sources is not equal to the same charging amount
- When checking the battery level, press the power button once, and the LED indicator light will light up to show the current battery level without any connection status, After about 30 seconds, the power supply will automatically go to sleep.
- Please regularly charge your power supply (recommended at least every 5 months) to maintain its long service life.
- Improper use of the product can easily cause harm to the product itself or potentially endanger personal and property safety.
- If consumers violate the product manual or use it improperly or warn them, resulting in personal and property damage, they will be responsible for it on their own, We will bear all consequences and will not assume any legal responsibility.
- Non-professionals are strictly prohibited from disassembling this product.
- Avoid using appliances or loads that exceed the output current of this product (circuit protection, no output).
- Avoid strong physical effects, including tapping, throwing, trampling, squeezing, etc.
Declaration of toxic and harmful substances in electronic products
This table is prepared under the provisions of SJ/T 11364.
- O: Indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is within the GB/T 26572 standard The limit requirements are as follows.
- X: Indicates that the content of toxic and harmful substances in a homogeneous material of the component exceeds the provisions of GB/T 26572 standard Limited quantity requirements.
Warning
Please follow the above safety instructions, otherwise, it may cause a fire
Electric shock, damage or other injuries.
FCC STATEMENT
FCC Requirement
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.