Segway ES1 Ninebot KickScooter User Manual

Segway ES1 Ninebot KickScooter User Manual

Thanks for choosing the Ninebot KickScooter (hereinafter referred to as KickScooter)!
Your KickScooter is a fashionable transportation device with a mobile app, that allows you to connect with other riders. Enjoy your ride and connect with riders worldwide!

WARNING!
Always use both electric brake and foot brake for emergency stopping. Otherwise, you risk falls and/or collisions from not achieving the max. braking capability.

Riding Safety

1. The KickScooter is a recreational transporter. Before mastering riding skills, you need to practice. Neither Ninebot Inc. (means Ninebot (Beijing) Tech Co., Ltd. and its subsidiaries and affiliates) nor Segway Inc. is responsible for any injuries or damage caused
   by a rider’s inexperience or failure to follow the instructions in this document.

2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the KickScooter you risk injury from loss of control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require longer braking distances. Sudden braking on low traction surfaces could lead to wheel slip or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.

3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and protects the back of your head.

4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.

5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and regulations if the situation is different.

6. In places without laws comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions.

7. Do not allow anyone to ride your KickScooter on his/her own unless they have carefully read this manual and followed the New Rider Tutorial in the App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the KickScooter. Make sure each new rider wears a helmet and other protective gear.

8. Before each ride check for loose fasteners and damaged components. If the KickScooter makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your KickScooter via the Ninebot by Segway App and call your dealer/distributor for service.

9. Be alert! Scan both far ahead and in front of your KickScooter — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).

10. To reduce the risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be 14+ years old. Always follow these safety instructions:

    • People who should not ride the KickScooter include:
    • Anyone under the influence of alcohol or drugs.
    • Anyone who suffers from a disease that puts them at risk if they engage in strenuous physical activity.
    • Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.
    • Anyone whose weight is outside the stated limits (see Specifications).
    • Pregnant women.
    • Riders under the age of 18 years old should ride under adult supervision.
    • Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
    • To ride safely, you must be able to see what is in front of you and you must be visible to others.
    • Do not ride in the snow, in the rain, or on roads that are wet, muddy, icy, or that are slippery for any reason. Do not ride over
      obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.

11. Do not attempt to charge your KickScooter if, the charger or the power outlet is wet.

12. As with any electronic device, use a surge protector when charging to help protect your KickScooter from damage due to power surges and voltage spikes. Only use the Segway-supplied charger. Do not use a charger from any other different product models.

13. Use only Ninebot or Segway-approved parts and accessories. Do not modify your KickScooter. Modifications to your KickScooter could interfere with the operation of the KickScooter, could result in serious injury and/or damage, and could void the Limited Warranty.

Packing List

Accessories

When unboxing your KickScooter, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service centre (see contacts in the user manual). After verifying that all components are present and in good condition, you can assemble your new KickScooter. Please retain the box and packaging materials in case you need to ship your KickScooter in the future. Remember to power off your KickScooter and unplug the charging cable before assembling, mounting accessories, or cleaning the mainframe.

Diagram

Dashboard & Power Button
Speedometer: Indicates the current speed. Also displays error codes when faults are detected.
Power level: Indicates the remaining battery level with 5 bars. Each bar equates to approximately 20% power level.
Power mode (double click the power button to switch the mode):

• Red “S” icon: Sport mode (maximum power/speed and reduced range).
• White “S” icon: Standard mode (moderate power/speed and range).
• No “S” icon: Speed limit mode (minimum power/speed and increased range).
• Bluetooth: A blinking Bluetooth icon indicates that the vehicle is ready to connect. A solid Bluetooth icon indicates that the vehicle isconnected to a mobile device.
• Power button: Short press to power on. Long press to power off. When powered on, a single click to turn on/off the headlight. Double-click to change the power mode.

Assembling Your KickScooter

1. Unfold the stem and push it until you hear a click. Then unfold the kickstand to support the scooter.
2. Firmly connect the wires inside the handle and the stem. Slide the handle onto the stem. Be aware of the correct orientation.
3. Install four screws (two on each side) with the included hex wrench.
4. Verify that your KickScooter powers on and off.

Installing a Second Battery Pack

Follow these steps when installing a second battery pack:

1. Remove the three screws on the stem, as shown. Then remove the cover near the charge port.
2. Install the support bracket and fasten it securely with three screws, as shown.
3. Install the battery pack onto the support bracket and tighten the screws securely.
4. Verify that your KickScooter powers on and off
5. First Ride There are safety risks when learning to ride the KickScooter. You must read the Safety
6. Instructions via the App before your first ride. For your safety, your new KickScooter is not activated and will beep occasionally after the Power is ON.
7. Until activated, the KickScooter maintains a very low riding speed, and can not be ridden with full function. Install the App on your mobile device (with Bluetooth 4.0 or above), connect to the KickScooter with Bluetooth, and follow the App instructions to activate your KickScooter and enjoy the full performance. Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above).
8. Install the App and register/log in. 2 Power on the KickScooter. A blinking Bluetooth icon indicates the KickScooter is waiting for a connection.
9. Click “Vehicle”→“Search device” to connect to your KickScooter. The KickScooter will beep when the connection is successful. The Bluetooth icon will stop blinking and remain illuminated.
10. Follow the App instructions to activate the KickScooter and learn how to ride safely.
11. You can now start to use your KickScooter, check the status with the App, and interact with other users. Have fun!

Charging

WARNING
Do not connect the charger if the charge port or charge cable is wet. Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge). Close the charge port cover when not charging.

Learning to Ride
Wear an approved helmet and other protective gear to minimize any possible injury.

1. Power on the scooter and check the indicator lamp power level. Charge the scooter if the battery level is low.

2. Stand on the footrest with one foot and push off with your foot to start gliding.

3. Put your other foot on the footrest to keep both feet stable. Press the throttle on the right hand to speed up when you are balanced.
   Note, For your safety, the motor will not engage until the scooter reaches 1.8 mph (3 km/h).

4. Slow down by releasing the throttle; stir the brake handle thumb shifter quickly and stamp the fender with the foot at the same time to trigger mechanical braking to make a sharp brake.

5. To turn, shift your body weight and turn the handle slightly

WARNING
When braking rapidly you risk serious injury due to loss of traction and falls. Maintain a moderate speed and look out for potential hazards.

WARNING
Failure to follow these instructions could lead to serious injury.

• DO NOT ride the scooter in the rain. DO NOT ride over speed bumps, thresholds, or other bumps at high-speed speed. Watch your head when passing through doorways.
• Watch your speed when travelling downhill. Use both brakes together when travelling at high speed.
• DO NOT press the throttle when walking with the scooter. Avoid contacting obstacles with the tyre/wheel.
• DO NOT carry heavy objects on the handlebar.
• DO NOT ride the scooter with only one foot.
• DO NOT ride on public roads, motorways, or highways.
• DO NOT rotate the handle violently while -driving at high speed.
• DO NOT ride through puddles or. other bodies of water deeper than 1 inch (2 cm).
• The KickScooter is for one rider only.
• Do not ride double or carry any passengers. Do not carry a child.
• DO NOT step on the folding pedal while riding,
• DO NOT touch the hub motor after riding because it can get hot.
• DO NOT take your hands off the handlebar while riding. Do not ride with one hand only.
• DO NOT ride up and down stairs or jump over obstacles.

WARNING
Always keep both hands on the handlebar or you risk serious injury due to loss of balance and falls.

Folding and Carrying

Folding
Step on the folding pedal while pushing the handlebar forward slightly. Then fold the handlebar down until it locks into the rear fender.

Carrying
When your KickScooter is folded up, simply lift it by the stem to carry it.

Maintenance

Cleaning and Storage
Use a soft, wet cloth to wipe the mainframe clean. Hard-to-remove dirt can be scrubbed with a toothbrush and toothpaste, and then cleaned with a soft, wet cloth. Scratches on plastic parts can be polished with fine-grit abrasive paper.

NOTE
Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose.

WARNING
Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise, you may damage the electronic components. Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

Battery Pack Maintenance
Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal. A well-maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance are at their best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details are available in the App.

NOTE
Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. A low-power battery should retain charge for 30-60 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by over-discharge or under-discharge will not be covered by the Limited Warranty.

WARNING
Do not attempt to disassemble the battery. Risk of fire. No user-serviceable parts.

WARNING
Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because low/high temperatures will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Specifications

| Item| ES1| ES2| ES4
---|---|---|---|---
Dimensions| Unfold: Length x Width x Height| 40x17x45 in (102×43×113 cm)
Fold: Length x Width x Height| 45x17x16 in (113×43×40 cm)
Weight| Net| 24.9 lbs (11.3 kg)| 27.6 lbs (12.5 kg)| 30.9 lbs (14.0 kg)

Rider

| Payload| 55–220 lbs (25–100 kg)
Recommended Age| 14+ years|
Required Height| 3’ 11”–6’ 6” (120–200 cm)

Machine Parameters

| Max. Speed| 12.4 mph (20 km/h)| 15.5 mph (25 km/h)| 18.6 mph (30 km/h)
Typical Range [1]| 15.5 miles (25 km)| 15.5 miles (25 km)| 28.0 miles (45 km)
Max. Slope| 10%| 10%| 15%
Traversable Terrain| asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature| 14–104°F (-10–40°C)
Storage Temperature| -4–122°F (-20–50°C)
IP Rating| IP54

Battery

| Nominal Voltage| 36 VDC
Max. Charging Voltage| 42 VDC
Charging Temperature| 32–104°F (0-40°C)
Nominal Capacity| 187 Wh| 187 Wh| 374 Wh
Battery Management System| Over-heating, short circuit, over-current and over- charge protection
Number Of Batteries [2]| 1| 1| 2
Motor| Nominal Power| 250 W| 300 W| 300 W
Max. Power| 500 W| 700 W| 800 W

Charger

| Output Power| 71 W
Input Voltage| 100-240 VAC
Output Voltage| 42 VDC
Output Current| 1.7 A
Duration of Charging| 3.5 h| 3.5 h| 7 h

Features

| Shock Absorber| front| front & rear
Brake Light| reflector| LED rear light
Atmosphere Light| N/A| Customizable colour
Riding Modes| Speed limit mode, Standard mode and Sport mode

1. Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
2. All KickScooter models could install the second battery. Some of the parameters would change in this case.

Certifications
Inis product has been tested to and passed ANSWUAN UL LLiz. The battery complies with UN/DOT 38.3. The second battery pack complies with ANSI/UL 2271 and UN/DOT 38.3. Federal Communications Commission (FCC) Compliance Statement for USA This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase tne separation between tne equipment and the receiver.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Industry Canada (IC) Compliance Statement for Canada This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (4) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B)/NMB- 3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user’s authority to operate the equipment.
For model: ESI/ES2/ES4
FCC ID: 2ALS8-NT9527
IC: 22636-NT9527

European Union Compliance Statement
Battery recycling information for the European Union Batteries or packaging for batteries is labelled by European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away but rather reclaimed upon the end of life per this Directive.
By the European Directive 2006/66/EC, batteries and accumulators are labelled to indicate that they are to be collected separately and recycled at the end of life.

The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators.

Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. Restriction of Hazardous Substances Directive (RoHS) Ninebot products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). Radio and Telecommunications Terminal Equipment Directive Segway Europe B.V.

EU Contact Address for regulatory topics only: Hogehilweg 8, 1101CC Amsterdam, The Netherlands. Hereby, Ninebot (Changzhou) Tech Co., Ltd, declares that the wireless equipment listed in this section complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Trademark and Legal Statement
Ninebot and the shape icon are trademarks of Ninebot (Tianjin) Tech. Co., Ltd; Segway is the registered trademark of Segway Inc.; Ninebot by Segway is a trademark of Segway Inc.; Android, and Google Play are trademarks of Google Inc. App Store is a service mark of Apple Inc. The respective owners reserve the rights of their trademarks referred to in this manual. The KickScooter is covered by relevant patents. For patent information go to http://www.segway.com. We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of printing. However, your KickScooter may differ slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App.

Please note that there are multiple Segway and Ninebot by Segway models with different functions, and some of the functions mentioned herein may not apply to your unit. The manufacturer reserves the right to change the design and functionality of the KickScooter product and documentation without prior notice. $ 2017 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.

Contact
Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your KickScooter.
Americas:
Segway Inc.
14 Technology Drive, Bedford, NH 03110, USA
Tel: 1-603-222-6000
Fax: 1-603-222-6001
Toll Free: 1-866-473-4929

E-mail Sales: customeroperation@segway.com
Email Service: technicalsupport@segway.com
Website: www.Sex.ray.comm

Europe, Middle East and Africa:
Segway Europe B.V.
Hogehilweg 8. 1101CC Amsterdam, The Netherlands
Email service: service@segway.eu.com
Website: www.segway.com

Have your KickScooter serial number on hand when contacting Segway!
You can find your serial number on the underside of your KickScooter or in the App under More Settings -> Basic Information.

Download PDF: Segway ES1 Ninebot KickScooter User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>