TERATRON BLEM0288 Bluetooth Low Energy Transceiver Modul 2.4ghz User Manual
- June 8, 2024
- TeraTron
Table of Contents
TERATRON BLEM0288 Bluetooth Low Energy Transceiver Modul 2.4ghz
Information
| project number | 0288.01 |
|---|---|
| version | 1.0 |
| created | 21.06.2022 / SAL |
| editet | 23.06.2022 |
| category | confidential |
| status | not released |
Applicability
The BLEM0288 is a bluetooth low energy 2.4GHz transceiver modul. It is intended for the implementation of internal projects
Functional discription
Block diagram
BLEM0288 block diagram
Product discription
The module BLEM0288 is used to integrate bluetooth applicatios in new own products. It supports interfaces like USB 2.0, SPI, NFC-A tag, programmable peripheral interconnect and general purpose I/O pins.
Technical Specification
Electrical characteristics
| supply voltage | 2,5 – 3,6VDC |
|---|---|
| operating frequency | 2.36 GHz – 2.5 GHz |
| bluetooth version | 5.1 |
| transmitter output power | +8 dBm max. |
| standby current | down to 1.5 µA @ 3V |
| max. current consumption | 40 mA @ 3V |
| interfaces | SPI USB 2.0 |
NFC-A tag
U.FL connector for external antenna General purpose I/O pins
|
operating temperature range| -40°C to +85°C
dimension (L x B x H)| 20,0mm x 14,8mm x 3,6mm
|
|
ESD precautions
ODEN-W16 series modules are Electrostatic Sensitive Devices (ESD) and require
special ESD precautions typically applied to ESD sensitive components.
ESD precautions should be implemented on the application board where the
module is mounted.
Pin assignment
| PIN | SIGNAL |
|---|
TP1
|
NC
TP2
|
NC
TP3
|
optional input
TP4
|
bootloader input
TP5
|
NC
TP6
|
NC
TP7
|
TxD output
TP8
|
RxD input
TP9
|
Reset
TP10
|
NC
TP11
|
SWDIO
TP12
|
SWDCLK
TP13
|
NC
TP14
|
NC
TP15
|
NC
TP16
|
NC
TP17
|
NC
TP18
|
DTM EN IN
TP19
|
DTM RX IN
TP20
|
DTM TX OUT
TP21
|
VDD(H)
TP22
|
VBUS
TP23
|
VSS
TP24
|
VSS
TP25
|
ANT
TP26
|
VSS-ANT
Internal photos
top view (and label location)
bottom view
Product labeling
The following label is shown as an example
BLEM0288 modul label
Reference
|
Description
---|---
1
|
Product name ID
2
|
manufacturer
3
|
Data matrix code (unit serial number)
4
|
Date of unit production (week/year)
5
|
FCC ID number
6
|
ISED ID number
7
|
part number
8
|
CE marking
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
ISED
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device
Change Index
01
|
creation of specification sheet
|
SAL
|
22.06.2022
---|---|---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>