CLAS CO 4065 Air Conditioning Leak Stop User Manual
- June 13, 2024
- CLAS
Table of Contents
CO 4070
STOP FUITE CLIMATISATION POUR R1234yf
AIR CONDITIONING LEAK STOP FOR R1234yf
clas.com
CO 4065
CO 4070
STOP FUITE CLIMATISATION R134a / R1234yf
WARNING
Before returning this product for any reason (installation problem,
instructions for use, breakdown, manufacturing problem…), please contact us.
Contact :
You can reach us by mail sav@clas.com or by phone
+33(0)4 79 72 69 18 or go directly to our website clas.com
If you have changed your mind regarding your purchase, please return this
product before you attempt to install it.
FEATURES
- The product stop leak is intended for the circuits of automobile air-conditioning
- For circuit up to 1.5 Kg of refrigerant gas
- This product does not contain gas R134a according to the regulation CE 842/2006 nor of propellant gas
- The vehicle must be equipped with a low-pressure connection
- Net content: 30mL
- The product is active in the liquid state of colorless / pale yellow color
- This product is intended for a professional use
- Not to be used in the hermetically sealed systems
- To use goggles and protective gloves
USE
- Recover the gas from the A/C system (before using the leak stop, it is better to change the filter to exclude the presence of moisture).
- Connect the A/C station and vacuum for 8 minutes.
- Check the vacuum value obtained with a manometer.
- Turn off the vacuum pump and check that the value is maintained for at least 5 minutes.
- If it is not possible to maintain the vacuum after 5 minutes, the leak is too big and the leakage stop will not be effective.
- If this parameter is met, after the vacuum procedure is completed, disconnect the LP (low pressure) quick coupling from the A/C system and connect the leakage stop with the B quick coupling to the A/C system on the low pressure coupling.
- Holding the Leakage Arrester bottle upside down, press button A until liquid is sucked out of the system (about 8/10 seconds). Disconnect the leakage stop.
- Recharge the A/C system with gas and oil according to the manufacturer’s instructions.
- Start the car for at least 20 minutes to allow the product to work and seal the leak.
CLAS Equipements
83 chemin de la CROUZA
73800 CHIGNIN
FRANCE
Tél. +33 (0)4 79 72 62 22
Fax. +33 (0)4 79 72 52 86
CO 4065
AIR CONDITIONING LEAK STOP FOR R134a 30mL
CO 4070
AIR CONDITIONING LEAK STOP FOR R1234yf
If you need components or parts, please contact the reseller.
In case of problems, please contact your authorized technician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>