ADLER EUROPE AD 2946 5 In 1 Men’s Grooming Kit User Manual
- June 25, 2024
- ADLER EUROPE
Table of Contents
ADLER EUROPE AD 2946 5 In 1 Men’s Grooming Kit
Product Specifications
- Model: AD 2946
- Power switch
- Display
- Beards and body trimmer
- Foil shaver
- Charging port
- Clipping head-length attachment
- Comb
- Charging cable
Product Usage Instructions
Safety Instructions
- Never use the device close to water.
- Remove the power plug from the socket after using the device in the bathroom.
- Do not allow the device or power adaptor to get wet.
Description of the Device
- The device includes various attachments such as a power switch, display, trimmers for beards, body, ears, and nose, a foil shaver, charging port, clipping head attachments, comb, and charging cable.
Environmental Protection
- Separate carton boxes and plastic bags for disposal in corresponding waste bins. Used appliances should be delivered to dedicated collecting points due to hazardous components.
Frequently Asked Questions
Q: How long does it take to charge the device?
A: The device takes approximately 2 hours to fully charge.
Q: Can I use the device with wet hands?
A: It is recommended not to use the device with wet hands to avoid any electrical hazards.
Q: What should I do if the device falls into the water?
A: Immediately unplug the device and power adaptor from the socket and do not attempt to use it until checked by a qualified electrician.
SAFETY CONDITIONS
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 5V 1A. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory, or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let the cord hang over the edge of the counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
- To provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
- Never use this device close to water, e.g.: Under a shower, in bathtubs, or above a sink filled with water.
- If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
- Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket.
- If the device is powered, do not put your hands in the water. Have the device checked by a qualified electrician before using it again?
- Do not touch the device or power adaptor with wet hands.
- The device has to be turned off after every use.
- Do not leave the unit on the wall outlet or power supply unit unattended.
- If the device utilizes a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.
- Keep the device out of the reach of children. Using the devices by children must be supervised by adults.
- The device is designed only for cutting natural human hair.
- The cutting blades are very sharp. Be careful during assembly, disassembly, and cleaning. Do not touch the blades’ moving parts during operation!
- Do not wash the blades in water.
- Change the attachments only when the unit is turned off.
- Use only original accessories.
- To remove hair from inside the machine, use only the included brush.
- Do not use the device in the bath.
- Do not use the device on people who are sleeping.
- During operation, do not place the device on wet surfaces or clothes.
- The device is not designed to work with external schedulers or a separate remote control system.
- Do not insert the trimmer into the nose or ear to a depth greater than 5 mm as this may cause damage to the nasal mucous membrane or eardrum.
DESCRIPTION OF THE DEVICE
- Power switch
- Clipping head
- Display
- Beards and moustaches attachment
- Beards and body trimmer
- Ears and nose trimmer
- Foil shaver
- Base
- Charging port
- Beard clipper-length attachments
- Clipping head-length attachment
- Body trimmer attachment
- Comb
- Brush
- Charging cable
BATTERY CHARGING
- Before use, charge the battery. To begin charging, connect the power cord to the charger and the charger to the 230V ~ 50Hz socket. Charging should last a maximum of 2 hours. A fully charged battery is sufficient for 60 minutes of continuous operation.
- After charging, remove the charger from the wall socket. When the device is not used for a long time, recharge it at least once every 6 months to maintain adequate battery capacity.
- A charger plug cable can be also placed in the base. This allows you to charge the device in a standing position.
USING THE DEVICE
- Depending on the needs install the appropriate trimmer or head. To uninstall an attachment, pull on the head firmly and it will pop off. To reinstall just position it into place and the built-in magnet will connect the head correctly.
Trimmer for ears and nose:
- Apply trimmer for ears and nose (6). Make sure that the septum and earlobe are clean before using the trimmer. Place the tip of the trimmer into the nostril or ear to a depth no greater than 5 mm.
- Gently moving the turned-on trimmer remove only hair protruding outside of the ear or nose
Beard and mustache trimmer:
- Apply precision trimmer (4). Gently slide the turned-on trimmer into a place where you want to shorten the hair. Do not approach the device in the eye area.
Trimmer for beards and body:
- Apply trimmer for beards and body(5). To adjust the cutting length you can install attachment (12) on the trimmer. Move the turned-on trimmer against the direction of hair growth.
Clipper:
- Apply clipping head (2). To adjust the cutting length you can install attachment (11) on the trimmer.
- By moving the attachment on the head, you can select the desired haircut length. Start by moving the clipper with the comb attachment against the direction of hair growth.
- This step should be performed slowly and at a constant speed.
Foil shaver:
- Apply foil shaving head (7). By moving the trimmer across the skin around the mustache, beard, and eyebrows you can remove unwanted hair.
CLEANING
- Disconnect the device from the power supply. Remove the attachment from the head. Clear the blades with the supplied brush. After cleaning, there should be no hair between the blades.
- After every few haircuts, oil the cutting head pouring 2 to 3 drops of machine oil into the space between the fixed blade and the movable blade.
TECHNICAL DATA
- Power supply: 5V 1A
- Charging time : 2 hours
- To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins.
- Used appliances should be delivered to the dedicated collecting points due to hazarsous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
MODELS
AFTER-SALE SERVICE NOTICE
- If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.
- WWW.ADLEREUROPE.EU
- 01-237 Warszawa ul.Ordona 2A
- tel. 728 – 595 – 006
- serwis@adler.com.pl
- www.adler.com.pl
Documents / Resources
|
ADLER EUROPE AD 2946 5 In 1 Men's Grooming
Kit
[pdf] User Manual
AD 2946 5 In 1 Men s Grooming Kit, AD 2946, 5 In 1 Men s Grooming Kit, Men s
Grooming Kit, Grooming Kit, Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>