ADLER EUROPE AD2116 Hair Curler User Manual
- June 5, 2024
- ADLER EUROPE
Table of Contents
ADLER EUROPE AD2116 Hair Curler
Product Overview
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The appliance is intended for domestic use only. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc..
Never use the product in humid conditions (bathrooms, cabin houses). -
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly.
-
Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never use the product close to combustibles.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
If using the device in bathroom after use remove the power plug from the power socket, because water proximity presents risk, even if the device is turned off.
-
Do not allow the device to wet. If the device falls into water, immediately remove the power plug from the power socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again.
-
Do not touch the device with wet hands.
-
The device has to be turned off after every use.
-
Do not leave device unattended when plugged in.
-
Keep the device out of the reach of children. Using the devices by children must be supervised by adults.
-
The power cord should not touch hot parts of the device and should not be located near other heat sources.
-
Do not wrap electric cable around the device.
-
Do not use the appliance in the bath.
-
Do not remove dust or foreign bodies from the inside of the device using sharp objects.
-
Do not use outdoors or where aerosols are being used or where oxygen is being administered.
-
Do not cover the appliance, it might cause the accumulation of heat in its interior and it may cause damage or fire.
-
Hairsprays contain flammable materials. Do not apply them while using the device.
-
Do not use the device on people who are sleeping.
-
During operation, do not put the device on a wet surface or on a surface that is sensitive to heat and high temperatures.
-
After use, turn off and unplug the unit. Wait until the device cools down before storing.
-
The heating elements reach high temperatures during operation. Do not touch hot parts of the device with bare hands and do not allow it to come into contact with the scalp, as this may cause burns.
-
The device is not intended to be operated with external timers or a separate remote control system.
DESCRIPTION OF THE DEVICE
- On/Off indicator (LED diode)
- Handle
- Ceramic coated barrel
- Temperature adjustment knob 140°C – 200°C
- Clamp
- Lever
- Cool touch tip
- Foldable stand
- Swivel cord
USING THE DEVICE
To achieve the best results in hair curling, use a device on washed, brushed and dry hair.
-
Before starting the electrical wire should be fully unrolled.
-
Insert the plug into the power socket.
-
Turn on the knob to the desired temperature (4). Marking on the knob indicates temperatures: 0 – OFF, 1 – 140°C, 2 – 160°C, 3 – 180°C, 4 – 200°C.
-
LED diode (1) is lighted flashing while reaching established temperature. Indicator diode stops flashing when the curler reaches chosen temperature.
-
Wait 2-3 minutes to allow the appliance to reach its working temperature.
-
Starting from the top of the head choose a small strand of hair and straighten it and comb.
-
Open the clamp (5) using the lever (6). Place the strand of hair so that the hair ends protrude slightly beyond the clamp. Close the clamp (5).
-
Wind the hair strand around the barrel (3), starting at the hair tips and moving closer to the head.
CAUTION: Avoid touching the head skin with the curling iron – this may cause burns. -
For heavy curl effect, keep the strand of hair wound around the curling iron wand for +/- 10 seconds or for a shorter time for light curls or crimped hair.
-
After use, move the temperature adjustment knob (4) to position: 0. Device will turn off. Then unplug it from the power source.
CLEANING
- Before cleaning, remove the plug from the socket and wait until curling iron cools down.
- The barrel should be cleaned with a damp cloth. Do not submerge in water or other liquids.
- Do not wind the power cable over the device.
TECHNICAL DATA
AD2116 – diameter: 19mm; power supply: 220-240V ~ 50/60Hz; nominal power: 36W,
maximum power: 160W AD2117 – diameter: 25mm; power supply: 220-240V ~ 50/60Hz;
nominal power: 45W, maximum power: 180W AD2118 – diameter: 32mm; power supply:
220-240V ~ 50/60Hz; nominal power: 56W, maximum power: 200W
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags
(PE) into the plastic container Worn device should be returned to the
appropriate point storage because it is dangerous in the device ingredients
may pose a threat to the environment. The electrical device should be handed
over to limit
its reuse and use. If in the device there are batteries you have to take out
and give to the point stored separately.
AFTER SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.