INBAY 241040-53-1 Wireless Charging Pocket Installation Guide
- June 4, 2024
- INBAY
Table of Contents
INBAY 241040-53-1 Wireless Charging Pocket Installation Guide
Overview
level of difficulty
CITROËN
Citroën Berlingo II (G/X/7) 06/2008->
Citroën C2 (J) 11/2003-12/2009
Citroën C3 (F) 04/2002-01/2010
Citroën C3 Pluriel (H) 07/2003-12/2010
Citroën Jumpy (G9/X) 02/2007-07/2016
FIAT
Fiat Scudo (270) 02/2007-07/2016
PEUGEOT
Peugeot 207 (W) 05/2006-06/2012
Peugeot 207 CC (W) 04/2007-07/2015
Peugeot 207 SW (W****) 09-2007-06/2013
Peugeot 307 (3…) 08/2001-08/2007
Peugeot 307 SW (3…) 06/2002-04/2008
Peugeot 307 CC (3…) 03/2003-03/2009
Peugeot Expert (G9/X) 01/2007-07/2016
Peugeot Partner Tepee (7) 05/2008->
TOYOTA
Toyota Proace 06/2013-07/2016
An appropriate installation in observance of these operating instructions is necessary. Please make sure the wiring is arranged so it is not bended or crimped due to the risk of cable break. Make sure that all connections are correct. Route the cable away from moving parts, do not allow the cable to be entangled, pinched or damaged in any way.
We will not be liable for damage due to improper installation or utilization.
Use the specified accessory parts to prevent product failure.
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
The “Qi” symbol is a trademark of the “Wireless Power Consortium”
Installation
Orange LED
Green LED
Depends on Smartphone
Orange LED flashing*
- Detection of foreign objects such as coins etc. (FOD)
The charging process is stopped for safety reasons.
INTEGRATED FOREIGN OBJECT DETECTION (FOD)
IMPORTANT INFORMATION:
Please don‘t place any other objects such as coins, credit cards etc. onto the
INBAY surface. Especially smartphones with attached ring stand holder must not
be used! – otherwise the integrated Foreign Object Detection (FOD) will
interrupt wireless charging for safety reasons.
ATTENTION! After installation, devices/consumers with more than 5A / 60W shall not be operated on the +12V socket. Otherwise a risk of overvoltage can occur!
241040-53-1
Input Voltage | 12V (DC) |
---|---|
Output Voltage | 5V |
Output Current | 1.1A |
Output Power | 5W |
IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTO THE DASH BOARD OF THE CUSTOMER‘S CAR.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>