INBAY Wireless Charging Subsytem User Manual

June 3, 2024
INBAY

INBAY Wireless Charging Subsytem User Manual

Features

  • Overvoltage Protection
  • Over Current Protection
  • Over Temperature Protection
  • NFC Card Detection
  • Foreign Object Detection (FOD)

Dimensions

Instructions

INTEGRATED FOREIGN OBJECT DETECTION (FOD)

IMPORTANT INFORMATION:
Please don‘t place any other objects such as coins, credit cards etc. onto the INBAY surface. Especially smartphones with attached ring stand holder must not be used! – otherwise the integrated Foreign Object Detection (FOD) will interrupt wireless charging for safety reasons.

ATTENTION! After installation, devices/consumers with more than 5A / 60W shall not be operated on the +12V socket. Otherwise a risk of overvoltage can occur!
Object Detection

Product photo (sample)

IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTO THE DASH BOARD OF THE CUSTOMER‘S CAR.
Product photo

FCC STATEMENT

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to  which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 10 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.  End-users and installers must be providewith antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

ISED :
Industry Canada Equipment Standard for Digital Equipment (ICES) –Canada Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B)/NMB-3(B)

Innovation, Science and Economic Development Canada(ISED) Compliance Statement
This device complies with ISED’s licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the ISED RF Exposure limits under mobile exposure conditions. (antennas are greater than 10 cm from a person’s body).

Human exposure

Driver Seat

Knee| 18,0 cm
Leg| 14,5 cm
Body| 50,0 cm
Hand| 42,5 cm
Arm| 49,0 cm
Head| 84,5 cm
Passenger Seat

Knee| 18,0 cm
Leg| 14,5 cm
Body| 50,0 cm
Hand| 42,5 cm
Arm| 49,0 cm
Head| 84,5 cm
Passenger

rear left
Knee| 98,0 cm
Leg| 96,0 cm
Body| 136,0 cm
Hand| 98,0 cm
Arm| 138,5 cm
Head| 153,5 cm
Passenger Seat

rear middle
Knee| 95,5 cm
Leg| 97,5 cm
Body| 126,5 cm
Hand| 97,0 cm
Arm| 141,5 cm
Head| 148,0 cm
Passenger Seat

rear right
Knee| 95,0 cm
Leg| 95,0 cm
Body| 131,0 cm
Hand| 100,0 cm
Arm| 140,0 cm
Head| 153,5 cm

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals