INBAY 241190-55-1, 241190-55-2 Wireless Charging Tray Installation Guide
- June 3, 2024
- INBAY
Table of Contents
INBAY 241190-55-1, 241190-55-2 Wireless Charging Tray
Required Tools
An appropriate installation in observance of these operating instructions is
necessary. Please make sure the wiring is arranged so it is not bended or
crimped due to the risk of cable break. Make sure that all connections are
correct. Route the cable away from moving parts, do not allow the cable to be
entangled, pinched or damaged in any way. We will not be liable for damage due
to improper installation or utilization. Use the specified accessory parts to
prevent product failure. Subject to technical modifications; no responsibility
is accepted for the accuracy of this information.
The “Qi” symbol is a trademark of the “Wireless Power Consortium”
Installation Instruction
INTEGRATED FOREIGN OBJECT DETECTION (FOD)
MPORTANT INFORMATION:
Please don‘t place any other objects such as coins, credit cards etc. onto the
INBAY surface. Especially smartphones with attached ring stand holder must not
be used! – otherwise the integrated Foreign Object Detection (FOD) will
interrupt wireless charging for safety reasons.
ATTENTION! After installation, devices/consumers with more than 5A / 60W
shall not be operated on the +12V socket. Otherwise a risk of overvoltage can
occur!
241190-55-1
Input Voltage
|
12V (DC)
---|---
Output Voltage| 5V| 9V
Output Current| 1.1A| 12A
Output Power| 5W| 10W
241190-55-2
Input Voltage
|
12V (DC)
---|---
Output Voltage| 5V| 9V| 9V
Output Current| 1.1A| 1.2A| 1.6A
Output Power| 5W| 10W| 15W
IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTOTHE DASH
BOARD OF THE CUSTOMER‘S CAR.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>