INBAY 241023-55-1, 241023-55-2 Wireless Charging Tray Installation Guide
- June 3, 2024
- INBAY
Table of Contents
241023-55-1, 241023-55-2 Wireless Charging Tray
Installation Guide
241023-55-1, 241023-55-2 Wireless Charging Tray
Wireless Charging Tray :
Power: 10W 241023-55-1
Power: 15W 241023-55-2
BMW 1 Series (F20) 08/2011 – 07/2017
BMW 1 Series (F21) 08/2012 – 07/2017
INSTALLATION GUIDE
If necessary, the following BMW spare parts might be required
(see page 12)
61 34 6 973 037
(Leuchtring / illuminated ring)
An appropriate installation in observance of these operating instructions is
necessary. Please make sure the wiring is arranged so it is not bended or
crimped due to the risk of cable break. Make sure that all connections are
correct. Route the cable away from moving parts, do not allow the cable to be
entangled, pinched or damaged in any way.
We will not be liable for damage due to improper installation or utilization.
Use the specified accessory parts to prevent product failure.
Subject to technical modifications; no responsibility is accepted for the
accuracy of this information.
The “Qi” symbol is a trademark of the “Wireless Power Consortium”
© 2021 · acv GmbH · Straßburger Allee 10-12 · 41812 Erkelenz
www.inbay.systems
2021-08-04
|
---|---
|
|
|
|
|
|
|
|
|
|
|
INTEGRATED FOREIGN OBJECT DETECTION (FOD)
IMPORTANT INFORMATION:
Please don‘t place any other objects such as coins, credit cards etc. onto the
INBAY surface. Especially smartphones with attached ring stand holder must not
be used! – otherwise the integrated Foreign Object Detection (FOD) will
interrupt wireless charging for safetey reasons. ATTENTION! After installation, devices/consumers with more
than 5A / 60W shall not be operated on the +12V socket. Otherwise a
risk of overvoltage can occur! 241023-55-1
Input Voltage | 12V (DC) |
---|---|
Output Voltage | 5V |
Output Current | 1.1A |
Output Power | 5W |
241023-55-2
Input Voltage | 12V (DC) |
---|---|
Output Voltage | 5V |
Output Current | 1.1A |
Output Power | 5W |
IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTO THE DASH BOARD OF THE CUSTOMER‘S CAR.