INBAY 241143-52-2 Wireless Charging Tray Installation Guide
- June 24, 2024
- INBAY
Table of Contents
INBAY 241143-52-2 Wireless Charging Tray Installation Guide
level of difficulty
A
Wireless Charging Einsatz
Wireless charging tray
B
Y-Kabel für +12V Buchse (Zigarettenanzünder)
Y-Cable for +12V socket (Cigarette lighter)
241143-52-1 (10W ) : ATC 2A
241143-52-2 (15W ) : ATC 3A
An appropriate installation in observance of these operating instructions is
necessary. Please make sure the wiring is arranged so it is not bended or
crimped due to the risk of cable break. Make sure that all connections are
correct. Route the cable away from moving parts, do not allow the cable to be
entangled, pinched or damaged in any way.
We will not be liable for damage due to improper installation or utilization.
Use the specified accessory parts to prevent product failure.
Subject to technical modifications; no responsibility is accepted for the
accuracy of this information.
The “Qi” symbol is a trademark of the “ Wireless Power Consortium”
INTEGRATED FOREIGN OBJECT DETECTION (FOD)
IMPORTANT INFORMATION:
Please don‘t place any other objects such as coins, credit cards etc. onto the
INBAY surface. Especially smartphones with attached ring stand holder must not
be used! – otherwise the integrated Foreign Object Detection (FOD) will
interrupt wireless charging for safetey reasons.
ATTENTION! After installation, devices/consumers with more than 5A / 60W
shall not be operated on the +12V socket. Otherwise a risk of overvoltage can
occur!
10W: 241143-52-1
| Input Voltage | 12V (DC) |
|---|---|
| Output Voltage | 5V |
| Output Current | 1.1A |
| Output Power | 5W |
15W : 241143-52-2
| Input Voltage | 12V (DC) |
|---|---|
| Output Voltage | 5V |
| Output Current | 1.1A |
| Output Power | 5W |
IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTO THE DASH
BOARD OF THE CUSTOMER‘S CAR.
