INBAY 241170-55-1 Wireless Charging Tray Instruction Manual
- June 9, 2024
- INBAY
Table of Contents
241170-55-1 Wireless Charging Tray
Instruction Manual
Wireless Charging Tray
Mazda CX5 (KE) 02/2015-04/2017
Power: 10W
241170-55-1
241170-55-1 Wireless Charging Tray
An appropriate installation in observance of these operating instructions is
necessary. Please make sure the wiring is arranged so it is not bended or
crimped due to the risk of cable break. Make sure that all connections are
correct. Route the cable away from moving parts, do not allow the cable to be
entangled, pinched or damaged in any way.
We will not be liable for damage due to improper installation or utilization.
Use the specified accessory parts to prevent product failure.
Subject to technical modifications; no responsibility is accepted for the
accuracy of this information.
The “Qi” symbol is a trademark of the “Wireless Power Consortium”
Install Manual
 
INTEGRATED FOREIGN OBJECT DETECTION (FOD)
IMPORTANT INFORMATION:
Please don‘t place any other objects such as coins, credit cards etc. onto the
INBAY surface. Especially smartphones with attached ring stand holder must not
be used! – otherwise the integrated Foreign Object Detection (FOD) will
interrupt wireless charging for safety reasons. 
ATTENTION! After installation, devices/consumers with more than 5A / 60W
shall not be operated on the +12V socket. Otherwise a risk of overvoltage can
occur!
| Input Voltage | 12V (DC) |
|---|---|
| Output Voltage | 5V |
| Output Current | 1.1A |
| Output Power | 5W |
IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTO THE DASH BOARD OF THE CUSTOMER‘S CAR.
Einbauvideo · Install video
www.inbay.systems/videos
© 2018 · acv GmbH · Straßburger Alee 10-12
· 41812 Erkelenz www.inbay.systems
1v18052018