HONG KONG EPB2606 5000mAh Magnetic Power Bank User Manual
- June 24, 2024
- HONG KONG
Table of Contents
HONG KONG EPB2606 5000mAh Magnetic Power Bank
5000 mAh POWER BANK
- USB-C INPUT & OUTPUT CHARGING PORT CD
- LED INDICATOR
- POWER BUTTON
- MAGNETIC CHARGING PAD
LED INDICATOR
4-LEVEL BATTERY CHARGE INDICATOR: 1 of 4 White LEDs is illuminated: 0-25% battery life 2 of 4 White LEDs is illuminated: 25-50% battery life 3 of 4 White LED’s is illuminated: 50-75% battery life 4 of 4 White LED’s is illuminated: 75-100% battery life.
CHARGING YOUR DEVICES USING CABLE
Press and hold the power button for 1 second to turn on. The LED indicator
will light up.
Plug the USB-C or USB-A cable into the charging port
and plug the other end into your device. LED indicator will light up and
charging will begin automatically. CHARGING YOUR DEVICES USING WIRELESS PAD
- A. Press and hold the power button for 1 second to turn on. The LED indicator will light up.
- B. Place your MagSafe compatible device on the magnetic wireless charging pad of the power bank. LED indicator will light up and charging will begin automatically.
RE-CHARGING THE POWER BANK
- Insert the included USB-A to USB-C cable into a power source (such as a USB wall charger). Plug the USB-C end into the USB-C input port to begin the re-charging process.
- LED will light up, indicating the power bank is charging.
- When the power bank is fully charged, 4 of the LEDs will be off.
PRODUCT SPECIFICATIONS
- Battery Capacity: 5000mAh
- Type-C Input: 5V/2A
- Type-C Output: 5V /2A
- Battery Type: Polymer Lithium Battery Wireless Charger: 5W (MAX)
CONTENT
- POWER BANK
- USER MANUAL
- USB-C CHARGING CABLE
FCC Waring
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from !hallo which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.