Rauenloth Water Tower and Windmill set Instruction Manual
- June 12, 2024
- Rauenloth
Table of Contents
Rauenloth Water Tower and Windmill set
Product Information
The Water Tower and Windmill is a model kit that allows you to build a miniature water tower and windmill. It is a fun and educational project suitable for both children and adults. The kitincludes all the necessary pieces to assemble the water tower and windmill, except for glue, paint, and string.
Product Features:
- Build a realistic water tower and windmill model
- Enhance creativity and problem-solving skills
- Includes all required pieces for assembly
- Glue, paint, and string not included
- Suitable for children and adults
Product Usage Instructions
Assembly Instructions for Water Tower:
- Glue together the pieces shown in the manual to form the water tower structure.
- Glue together the pieces for the water pipe in a sandwich-like configuration.
- Assemble the crank by gluing the pieces in the specified order (follow the green circle).
- Construct the water tower chassis by gluing the shown pieces together.
- Add a rubber band to hold the chassis until the glue is dry.
- Glue together the pieces for the top of the water tower in the order shown, adding a rubber band until the glue is dry.
- Create a 3 x sandwich by gluing the shown pieces together. Once dry, attach the three rings to the water tower.
- Glue the top of the tower onto the chassis, ensuring it is centered. Place piece 1 above the crank (follow the green circles).
- Attach the ladder and the water pipe to the water tower.
- Finally, you can paint the assembled water tower and add a string for additional decoration (paint and string not included).
Assembly Instructions for Windmill:
- Glue together the pieces shown in the manual to form the windmill chassis. Ensure that piece A is centered.
- Add a rubber band to hold the chassis until the glue is dry.
- Glue together the pieces for the windmill top. Add a rubber band until the glue is dry, then attach it to the chassis.
- Glue the shown piece onto the windmill wings.
- Add the wings to the top of the windmill using the shown pieces. Apply glue only as indicated in the manual.
- Attach the ladder to complete the assembly of the water tower and windmill.
Assembly Instructions
- Glue together shown pieces for the water tower. Glue together pieces for water pipe (sandwich). Glue together pieces for the crank in the shown order. (Green circle)
- Glue together shown pieces for the water tower chassis. Add a rubberband until glue is dry.
- Glue together shown pieces for the top of the water tower. Glue in the order shown. Add a rubberband until glue is dry.
- Glue tigether shown pieces into 3 x ”sandwich”. When dry, glue the three rings onto water tower.
- Glue top of Tower onto chassis. Make sure piece is centered. Also make sure, that piece 1 is above the crank. (Green circles). Add the ladder and the water pipe.
- Finally add a little paint and a string. (Not included.)
- Glue together shown pieces for the windmill chassis. Make sure that piece A is centered. Add a rubberband until glue is dry.
- Glue together shown pieces for the windmill top. Add a rubberband until glue is dry. Then glue top onto chassis.
- lue shown piece onto the windmill wings.
- Add wings to top using shown pieces. Glue in order shown. Only add glue to wings as shown.
- Add the ladder.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>